Repairs to the 02 cusec Horizontal pump at LIS Gungbugh 2nd of MISD Handwara.

Amount

Repairing of the 02 cusec Horizontal pump at LIS Gungbugh 2nd by way of • Dismantling of pumping unit at site, shifting of housing to the road side by engaging labours loading on private vehicle shifting to workshop. • Complete dismantling of pump housing at workshop, cleaning of its parts with K-oil for thorough inspection and extraction of damaged parts by engaging skilled manpower. • Repairs to the impeller shaft at excessively worn out places by way of welding, turning, finishing and balancing on lathe machine by engaging a skilled operator. Job further includes manufacturing. Providing and fitting of MS check-nut as per sample. • Replacement of damaged sleeve by way of manufacturing, providing and fitting of new sleeve fabricated out of MS material as per sample (02 no.) • Removing of broken/damaged studs/bolts from pump body, boring and tapping along with fasteners of suitable size. • Providing and fitting of ball bearings No. 6308 (02 No.) along with proper & adequate lubrication. • Providing and fitting of palmatto gland packing & assorted size nuts and bolts. • Assembling of pump housing at workshop by engaging skilled manpower after carrying out necessary repairs/ replacements and then shifting it back to site in a privately owned load carrier, re-assemble it with other allied accessories and testing on full load. Job includes all charges for handling, loading/ unloading, head loads, carriage etc. and all tools & tackles required for proper execution of work shall be provided by the firm.

Repairs/periodic maintenance of 200 mm foot valve installed on suction by way of extraction of foot valve from their installed position by means of cutting damaged/rusted/worn out bolts The job includes reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc. as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars. Re-fitting to suction line and testing on full load.

Providing and fitting TC-17coupling set complete for pumping unit along with flexible rubber tyre. Taking dimensions of prime mover shaft and pump shaft at site and then boring the CI coupling halves as per site requirement on lathe machine at workshop. Complete linear and angular alignment of prime mover and pump shafts for smooth operation including providing and fitting of coupling bolts. Tested pumping unit on full load at site.

M/s Sopore Engineering Works

M/S NEW BUHROO ELECTRICAL AND MECH ENGG WORKS

SYED MOHAMMAD SHAH

Mir Fab Industries

M/S MODERN ELECTRICALS AND SUPPLIERS