Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.0 LAccepted-AOC BAGTAWARMAL JI BAG CHOPASNI ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹21.3 L+₹95,157.50 (4.69%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹21.7 L+₹1.4 L (6.91%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹25.0 L+₹4.7 L (23.2%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹26.7 L+₹6.4 L (31.4%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
1 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR-342010
PERIODICAL SERVICES AND CERTAIN BR WKS IN AREA OF AGE BR-I UNDER GE ARMY NO. 01 JODHPUR
2023_MES_584361_1
82223/103/E8
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY NO. 01
₹60,000
Yes
18 May 2023
4 Mar 2023
3 Apr 2023
4 Mar 2023
1 Apr 2023
18 Mar 2023
6 Mar 2023 - 17 Mar 2023
Amount
M&L for preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying one coat of white wash on wall complete all as specified and as directed.
M&L for preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying two coat of white wash on wall complete all as specified and as directed.
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old surfaces by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots to wall including cornices etc plaster or unplastered surfaces (old decorated surface) and applying one coat of colour wash on wall all as specified and as directed.
M&L for preparation of old surfaces by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying two coat of colour wash on wall all as specified and as directed
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing and efflorescent salts and applying one coat of distemper oil emulsion complete all as specified and directed
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing and efflorescent salts and applying two coat of distemper oil emulsion complete all as specified and directed
M&L for preparation of old decorated surfaces plastered or unplastered on ceiling including cornices pilasters by brooming down or steel wire brushing and efflorescent salts and applying one coat of distemper oil emulsion complete all as specified and directed
M&L for preparation of old decorated surfaces plastered or unplastered on wall and applying one coat of cement base paint as approved coloured and shade by GE complete all as specified and directed
M&L for preparation of old decorated surfaces plastered or unplastered on wall and applying two coat of cement base paint as approved coloured and shade by GE complete all as specified and directed
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed
M&L for preparation old surface using necessary filling compound of Altek putty to obtain smooth regular/even finish using sand paper and applying one coat of plastic emulsion complete all as specified and directed
M&L for preparation of old surfaces by brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and applying two coat of exterior acrylic emulsion on old plastered surface as per the manufacturer’s instruction over a coat of primer/ wall putty complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water complete all as specified and directed.
M&L for applying three coats of Birla White Wall Care Putty on wall as per manufacturer’s instruction complete all as specified and directed.
M&L for applying two coats of plastic emulsion paint on wall surfaces as per manufacturer’s instruction complete all as specified and directed. Note: Preparation of surfaces and complete removal shall be measured and paid against Item No.15 as considered therein.
M&L for applying two coats of oil bound distemper on prepared wall putty surfaces complete all as specified and directed. Note : Preparation of surfaces and complete removal shall be measured and paid against Item No.15 as considered therein.
M&L for two coat of texture paint over two coat of wall putty on wall of old plastered surface complete all as specified and directed.
M&L for painting floors with ready mixed paint for use on floors; each coat complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (FIRST QUALITY) of any tint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer of any tint all as specified and directed by Engr-in-Charges.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over red oxide of any tint complete all as specified and directed.
Taking down carefully cement plaster/ spelled out concrete from wall, ceiling of RCC slab, sunshades, beams, etc by chipping out lightly including necessary scaffolding etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6, finished even and smooth without extra cement on stone wall surface complete all as specified and directed.
M&L Rendering 10 mm thick CM 1:4, on concrete surfaces on ceiling / facia /RCC Chhaja etc finished even & smooth without using extra cement complete all as specified and directed.
Racking out joints/pointing to square rubble masonry of Jodhpur type, regular coursed built in cement mortar all as specified
M&L for Keyed pointing in CM 1:3 to square rubble masonry Jodhpur type regular course all as specified.
M&L for preparation of newly plastered wall surfaces and applying one coat of chalk white and two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15cm thick (below or above ground level) complete all as specified and directed.
M&L for PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in flooring, path, sub base etc complete all as specified and directed.
M&L for 40mm thick, PCC 1:2:4, type B1, using 20mm graded stone aggregate finished even and smooth without using extra cement as in floors including complete all as specified and directed.
M&L for 50mm thick, PCC 1:3:6 type C-2 using 20 mm graded stone aggregate finished fare and even without using extra cement as in plinth protection or similar places complete all as specified and directed.
Taking out from position framed woodworks of overall size exceeding 0.50sqm but not exceeding 1.50sqm & depth not exceeding 60cm as in cupboards/cabinets etc with all fittings, shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land complete all as specified and directed.
S&F in repair 18/19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces complete.
S&F second class hard wood plain, fillets, square, rectangular or triangular in section clean sawn, secured with nails of sectional area exceeding 13Sqcm but not exceeding 25 Sqcm complete all as specified and directed.
M&L for polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw. The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete all as per manufacturers specification and direction of Engineer-in-Charge.
M&L for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one of two different colours (with wood grain printed pattern/ivory colour finish) as in kitchen cabinet shutters, all round body of cabinets, shelves, drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .
S&F 30mm width, Continuous (piano) hinges, mild steel, bright finished or electrogalvanised complete all as specified and directed.
M&L for lipping 1-1.5mm thick 18 mm wide lipping on PVC boards complete all as specified and directed.
S&F degree clip type self closing hinges for cabinets fixed with cadmium coated screws all as per sample complete all as specified and directed..
S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters complete all as specified and directed.
S&F 75mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet drawers complete all as specified and directed.
S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed.
S&F drawer runners folding type with guide channels & sliding channel with appropriate ball bearing/ rollers etc complete to obtain smooth movement of the drawers complete all as specified and directed.
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil complete all as specified and directed.
S&F 40mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F PVC cupboard knob fixed with nut, screw and washer of mild steel bright finished size exceeding 25 mm dia but not exceeding 50 mm dia (as per sample) complete all as specified and directed..
Taking down chowkhats or frames not exceeding 1.5sqm each without taking off shutter from the frame complete all as specified and directed.
Taking down chowkhats or frame exceeding 1.5Sqm but not exceeding 4.0Sqm each complete all as specified and directed.
Taking down shutter of any description, exceeding 1.0Sqm but not exceeding 2.0 Sqm each complete all as specified and directed.
Refixing shutters of any description not exceeding 1.0Sqm each in same opening complete all as specified and directed.
Refixing shutters of any description exceeding1.0Sqm but not exceeding 2.0Sqm each in same opening complete all as specified and directed.
Taking down shutters of any description not exceeding 1.0 Sqm each and removing to or from store complete all as specified and directed.
M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work with cement mortar 1:6 also facing, jointing and pointing to match existing work complete all as specified and directed.
M&L for Mild steel work as in doors frames using Tee/ MS angle iron complete all as directed.
M&L for mild steel framed work as in brackets, cooler stands, framed steps/stairs etc complete using MS angle iron Steel bars, gusset plate etc complete all as specified and directed.
M&L for fabrication of Mild steel guard bars and welded to window frames complete all as specified and directed.
S&F 35mm thick 2nd class Hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.
S&F 35mm thick 2nd class Hard wood factory made paneled door shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed..
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
S&F Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.
S&F in repair pre powder coated coloured aluminum anodized door frame and shutters for door/windows, etc or as approved by GE including jointing cleats for fixing etc as per manufacturers instructions complete all as directed. Note: (i) Weight of all aluminum members shall be measured (ii) Hinges, handles etc shall be measured and paid separately. (iii) Glass pan and rubber beading shall be measured and paid separately. (iv) Fixing of shutters with fittings shall be as per manufacturers instructions.
S&F in repair standard powder coated coloured aluminum anodized Deco grill ‘U’ channel 25x12 mm with and including perforated aluminum wire mesh weight not less than 550gm/Sqm over grill complete all as specified and directed .
S&F 5 mm thick tinted/frosted glass fixed with alumimium channel/snap grid and securing with rubber beading packing as in door, windows and ventilator complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm complete all as specified and directed.
S&F in repair lock 2 levers, vertical type size 100 mm size brass body for aluminium door (as per sample) complete all as specified and directed.
S&F in repairs hydraulic door closer designation No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed.
S&F in repair stainless steel decorative type 25mm curtain rod with fixing brackets knobs, etc complete all as specified and directed.
S&F in repairs 8mm thick high quality looking mirror of area not exceeding 2.0 sqm with fancy type beading fixed to wall with chromium plated screw complete all as specified and as directed
Nikhat nirman
M/s Chawariya Enterprises
M/S OM VISHNU ENGINEERING & CONSTRUCTION COMPANY
M/S KAUTILYA GARG
JAMWAY MATA CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .