Repair of Female Wards in Dr. Y. S. Parmar Govt. Medical College at Nahan

Amount

Dismantling doors, windows and clerestory windows, ventilators etc. (wood orsteel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of unserviceable materials including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. Upto Floor all level including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

15mm (fifteen) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and /or rounded angles In all girth and finished even and smoth in cement mortar 1:6 ( one cement isto six sand) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

White glazed tiles 6 (Six) mm thick in flooring, treads of steps and landing laid on a bed of 12(twelve) mm thick cement mortar 1:3 (one cement isto three sand) and finished with flush pointing in white cement. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 (one thousand two hundred eighty five) anodised transparent or dyed to required shade according to IS 1868. (one thousand eight hundred sixty eight) (minimum anodic coating of grade AC 15(Fifteen ) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F 12(Twelve) mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 2nd class deodar wood 40mm (forty milimetre) thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 (eighty five grame) G. with wire of dia 0.56 (zero point fifty six metre) ) m for doors windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodized aluminium handles anodised transparent or died to required shade and colour with screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.125 mm(one hundred and Twenty five milimetre).

Providing and fixing anodized aluminium sliding door bolts anodised transparent or died to required shade and colour with bolts,nuts and screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. (a) 250 X16 mm( two hundred fifty into Sixteen milimetre) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete.250x10mm( two hundred fifty into ten milimetre) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

[email protected]

AQIB KHAN

BAldev Singh S/O JAlam Singh R/O gundah P.O. Kiyari Gundah Tehsil Shillai Distt. Sirmour H.P.