SPL REPAIR TO BLDG NO T 158 T 159 T 160 OF DSC COY AT IMA DEHRADUN

Amount

Dismantling of AC corrugated, semicorrugated sheet including ridge in roof covering,complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding ridges to wall fixed with self tapping screws as specified. Make:- Tata Blue scope, JSW coloron+, Jindal steel neo+

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws as specified. Make:- Tata Blue scope, JSW coloron+, Jindal steel neu+

Dismantling timber scantling40 sqm cm and over in section in any position framed work complete all as specified.

M&L for second class hard wood in scantling clean sawn complete all as specified and directed.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quality B) Make:- Tata steel, JSW steel, Appolo steel, Jindal steel.

M&L for Preparing surface of wood and wood based materials , new or old of any description and girth not otherwise decribed , and treated with tar or coal tar black paint all as specified.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified.

M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper, (OBD) white or tinted including removing existing nails, if any, surface as directed.

M&L for Preparation of old decorative surfaces of wall / ceiling and applying one coats of weather coat exterior paint including sanding/grinding complete all as specified and directed. Note:- work shall be executed from authorized applicator as approved by GE

M&L for preparation of new plastered surfaces of walls and applying one coat of oil emulsion distemper, white or tinted including removing existing nails, if any, any Nos and filling the disturbed surface/holes with Birla white putty or cement plaster and Birla white putty and making smooth surface as directed.

M&L for Preparation of old wooden surface width or girth over 10 sqcm area exceeding 10 sqcm and applying one coat of synthetic enamel paint including preparation of suraface

M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder, applying 1mm to 1.5mm thick acrylic damp proof wall care putty as per manufacturers instruction, Preparation of puttied wall / ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. Note : 1. The work pertaining to periodical services shall be executed from authorized applicator as approved by GE. 2. After completion of distempering, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be done on this account and damage if any to be borne by the contractor :- (i) cleaning of floor with floor cleaner and stain should be removed from wall/door/jaali. (ii) cleaning of fan after removing and refixing the same. (iii) cleaning of curtain rod. (iv) shifting of furniture.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and Ceiling including surface finished even & fair, finishing curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom).

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605x 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mmx25mmx 1.4mm, cross tee 38 mmX25 mmX1.4mm, angle along walls 38 mmX 25mmX2.0 mm and including taking down existing framework, boards any thickness including cover fillets etc complete all as directed.

S&F machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing incl demolation old surface ,complete all as specified and directed by Engineer –in-Charge.

S&F machine cut kota stone slab 18-20mm thick in riser of steps , skerting , dado and pillers, laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing incl demolation old surface ,complete all as specified and directed by Engineer –in-Charge.

Demolation of cement concrete in ground floor and paving n,exc 15cm thick below or above ground level. (un-reinforced) all as specified and directed.

M&L for Mirror polishing on marble / granite / kota stone/ stone work where ever required to give high gloss finish/ complete all as sepecified

M&L for vitrified ceramic coloured tiles 10 (square/ rect) polished,, area of each tiles not exc 0.36 sqm inverticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick screed bed in cement mortar 1:4 including dismantling floor hearth or wall tilling incl cement mortar bedding complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed.

Taking down old unsv T/L, Lamp,Security light of any size and capacity all as directed.

Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in including Non regid PVC metallic conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box and outer cover and frame for mounting modular switch, regulators etc complete for the following. Make of wire:- Havells, Anchor, Grandlay Make of pre conduit :- Bhagwati Agriculture, Plaza, AKG. Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 28 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix modular switch 1 way 10A, 1 Module

Supply and fix modular switch 1 way 20A, 1 Module with indicator lamp

Supply and fix modular socket 10A, 2/3 pin combined 2 Module

Supply and fix modular socket 10A/20A, 2/3 pin combined 2 Module

Supply and fix modular fan regulators step type 2 module 120W .

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

S&F LED tubelight batten fitting 20/22 Watt made of aluminium housing suitable for fixing on walls/ceiling, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: BRIGHT LINEA of Crompton/LUMILINE PLUS NEO of Havells/ Essential SmartBright Batten of Philips

Supply and Fix LED street/Security wall mounted light fitting of lumens 2550 lm ,Single Piece High pressure die cast aluminium,system efficacy 1100L/W,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish, fully diffused ,Polycarbonated Cover for More protection ,inbuilt electronic driver IP 66 ,High bright LED with Lens, colour temp Not less than 5700 Cool Day Light,colour rending index not less than 70 ,life not less than 50000 hrs,inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz ,surge protection minimum 4 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose . Make: - smart bright of PHILIPS /wonder pro of CROPTON/newgen of Surya

Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) including taking down old unsv serviceable fan and deposited to the store. Make:- Crompton, Havells, Khaitan.

S & F MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity . Make:- Havells, Indo Asian, Legrand.

MCB DB SPN,16 ways

S & F MCB SP /SPN complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided at the time of bidding of following capaity. Make:- Havells, Indo Asian, Legrand.

MCB SP 240 volts, 50 Hz capacity 6-32 Amps

MCB SPN 240 volts, 50 Hz of capacity 40 Amps

S & F Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt ,suitable for fixing FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity and making good the distrubed surface complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule)

4 Way VTPN DB (FP MCCB +12 MCB,C). Make :legrand Cat No. 507745 equvilent in Havells, Indo Asian.

S & F MCCB ,4 pole ICS=100% ICU at 415 volts with rupturing capacity 16 KA with thermal-magnetic release and adjustable overload setting . The MCCB shall have a Mechanical life = 40000 operations & Electrical life = 8000 operations of following capacity complete all as directed. Make: Legrand, Indo Asian, Havells.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(one earthing for each main Panel )

S & F sub main wiring with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Make of wire: Grandlay/ Havells/ Anchor. Make of pre conduit :- Bhagwati Agriculture, Plaza, AKG. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit.

2 x 6 Sqmm + 1 x 6 sqmm

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core in 50 mm dia LDPE pipe in trench up 45 cm depth all as specified and directed. Make:- Havells, Grandlay, Polycab.

ADEPT INFRA SOLUTIONS (BID ID -3192930)

Sharda Enterprises (BID ID -3193016)

M/S PUNDIR BUILDERS (BID ID -3192905)

RAMSONS DEVELOPERS (BID ID -3193192)

M/s Vinod Singh Negi (BID ID -3193056)

Pragati Enterprises (BID ID -3190946)

Aggrawal Builders and Furnishers (BID ID -3189420)

ACE BUILDERS AND CONTRACTORS (BID ID -3193516)

SHIVA ENTERPRISES (BID ID -3190135)

M/s caspur construction company (BID ID -3193293)

M/S RAJESH KUMAR GOYAL (BID ID -3193162)