PROVISION OF LED LIGHTS WITH POLE AT NABAGRAM MILITARY STATION UNDER GE (P) PANAGARH

Amount

M&L for Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including testing on completion including earthing pit with cover suitable size , complete all as specified and as directed by Engrs-In-Charge.

S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) including two coats of aluminium based paint over one coat of primer, complete all as specified and as directed by Engrs-In-Charge.

Supply and fixing LED street light fittings on poles all as conforming to the following : (i) System watt/lumens:- Max 72 watts/total system lumen not less than 7200 lm (ii) Housing:- High pressure die cast aluminium (iii) IP Rating :-IP 65 (iv) Front cover :- Toughened Clear Glass (v) mounting :- Suitable for pole mounting with bracket arm 40-50 mm dia Mounting height (vi) Finish: Epoxy powder coated with any additional treatment for smooth and anti (vii) Lamp :- High bright LED with Lens (viii) System Efficiency (lm/W) of the luminaries:- not less than 110 lm/watt (ix) Colour temperature(k) :- not less than 5700 (x) Colour Rendering Index (CRI): - Not less than 74 (xi) Life:- Burning Hours not less than 50000 Hrs of operation (xii) Optics :- Spread ( beam angle along the driveway)-120 degree throughbeam angle (xiii) Control Gear :- inbuilt electronic driver with APFC, PF not less than 0.90 and THD (xiv) Surge protection:- inbuilt surge protection minimum 10 KV (xv) Heat Shink :- As per OEM 's Design (xvi) Bidder has to compulsorily submit the LM -79 and LM-80 test report from NABL Lab.

Supply , laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core for connection of LT panel to street light/flood light panel , complete all as specified and as directed by Engrs-In-Charge.

Supply , laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core for connection of street light/flood light panel, complete all as specified and as directed by Engrs-In-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft /loose soil complete, complete all as specified and as directed by Engrs-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. , complete all as specified and as directed by Engrs-In-Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point , complete all as specified and as directed by Engrs-In-Charge.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying , complete all as specified and as directed by Engrs-In-Charge. Note : Punned thickness shall be measured

M&L for Bricks; common burnt clay building bricks, sub-class ‘A’ designation 75 for cable protection , complete all as specified and as directed by Engrs-In-Charge.

M&L for plain cement concrete 1:4:8 type D-2 ( using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed by Engrs-In-Charge.

M&L for PCC (1:2:4) type B-1 ( using 20 mm graded stone aggregate) as in coping , bed plates, kerbs, etc including necessary form work complete all as specified and as directed by Engrs-In-Charge.

Supply and fix junction box Polycarbonate complete with terminal block 4 pole and MCB SP 3 A / 6 A with neutral block for street light with necessary nut bolts and clamps for fixing on Pole , complete all as specified and as directed by Engrs-In-Charge.

S&F street light bracket 1.5 m made with 40 mm dia medium grade GI Pipe with 300 mm dia and 380 mm length pole top MS cover including primer and paint up to 1.5 M length , complete all as specified and as directed by Engrs-In-Charge.

Supply, laying & testing PVC insulated , PVC sheathed cable unarmoured, with stranded copper conductor of size 1.5 sqmm 3 core 240 Volts grade including PVC / Steel conduit and clamp suitable size , complete all as specified and as directed by Engrs-In-Charge. Note:- Cable used for street light connection from junction box to street light

Boring of holes of dia 80 mm under road, pavement & hard standing , complete all as specified and as directed by Engrs-In-Charge.

S&F 50 mm bore GI tubing medium grade ISI marked for protection of cable including fittings , complete all as specified and as directed by Engrs-In-Charge.

Ultimate Solution Company

S S ENTERPRISE

M/S SAIMON ENGINEERING

ANSH CONSTRUCTION

M/S MECHANICAL ENGINEERING and ELECTRICAL CONTRACTORS

TOTCO

Lotas Engineers

NIRMAL SALES CORPORATION

Abida Enterprises