Shifting of existing lines, S/s from SH-70 Phase-1Jhankat-Khatima under EDD,Khatima

Amount

Particulars of material

Supply of X-arm Holding Clamps for STP,SP-55made of M.S. flat of size 50X6 mm. with 65x16mm.size ( 2 Nos. ) M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of L.T. Insulator 75x90mm with nut & bolts.

Supply of F- Clamps for STP,SP-55made of M.S. flat of size 50X6 mm. with 65x16mm.size ( 2 Nos. ) M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of Brecing Clamps for STP,SP-55 made of M.S. flat of size 50X6 mm. with 65x16mm.size ( 2 Nos. ) M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of L.T. Clamps for STP,SP-55 made of M.S. flat of size 50X6 mm. with 65x16mm.size ( 2 Nos. ) M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of l..T. Clamps for P.C.C. Pole, made of M.S. flat of size 50X6 mm. with 65x16mm.size ( 2 Nos. ) M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of earth Clmaps for STP-SP-55made of M.S. flat of size 50x6 mm. with 65x6mm.size ( 2 Nos. ) M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of suspension clamp with I hook for LT cable STP,SP-55 M.s. Flate 50x6mm. Wth suitable size of nut& bolts.

Supply of Dead End clamp with I hook for LT cable STP,SP-55 M.s. Flate 50x6mm. Wth suitable size of nut& bolts.

Supply Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex make or other ISI mark reputed company ) with Panel Lock with key) ( As per drawing attached ) with clamp for STP-55 M.S. flate 50x6mm. with nut and bolts.

Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120sq.mm to 120sq.mm ( Tyco/ RPG/3M. make) ( As per drawing attached )

Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120sq.mm to 25sq.mm ( Tyco/ RPG/3M. make) ( As per drawing attached )

Supply of Eye Bolt 12x110mm.

Turn Buckle for Guarding.

Supply of Stay clamp single ended SP-55,M.S. flate 50x6mm. M.S. Bolt, Nut & washer duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs complete in all respect as per sample.

Supply of Stay Insulator P.C.C. Pole M.S. Flate 50x6mm with nut & bolts.The inslator should be free from any crack, welding & burrs complete in all respect as per sample. B&B.

Supply of Nut & Bolts( Suitable size ) with washer suitable size for bracing .

Supply of Suspension/Dead end clamp assembly with all fittings ( For HT ABC )

11KV. GO/TPMO Switch set ( 600 Amp) with 2No. Mounting channel of 100x50mm. 2200mm.long for fixing arrangement complete with clamps, Nuts, Bolts & Washers all galvanized.

11KV. 3Ph,( 400 Amp) 3 pin type, Vertical Mounting type, Gang Operated, AB switch/TPMO set with 2No. mounting channel 75x40x6mm., 2800 mm long with clamps, nuts bolts & Washers all galvanized.

11KV, 3-PH,Drop Out Fuse units( set of 3 Units) along with support Insulators, Base Channel, Fuse barrel etc, complete with clamps, Nuts,Bolts & washers all galvanized as per technical specification, scope of works and approved drawings.

T-Connector( one no. for each phase) of suitable size ( Incomer-150 sqmm. & outing as per site requirement )

Universal Hook with bots & nuts all galvanized for handing of HT ABC, 11KV.

PP of suitable size for Top portion of STP-410, SP-23 Pole.

Suspension Clamp assembly including pole clamps( ST Pole ) suitable for 11KV. AB Cable.

Dead end Anchor clamp assembly Brackets pole clamps (ST Pole) for 11KV. AB Cable.

Earthwire clamp made of MS flate 50x8mm.for STP, SP-23 with Nut & bolts wahsers all galvanised.

G.I. Earth pipe 40mm dia 2500mm. Long( with clamp of M.S. flat 40x3mm. Nuts,bolts & washers complete all galvanized.

11KV. Danger Board with clamp, Nuts, Bolts & washers all galvanized.

Anti-Climbing Device( 2.5mm.dia( 12SWG)galvanized barbed wire 3.5kg per pole ) with 2No. Clamp made of 50x8mm. Strip with nuts ,bolts & washers all galvanized.

Supply of Holding clamps of 40x3mm. With bolts, Nuts and washers all galvanized( For GI Strip of DTR suitable for SP-23 Pole)

Supply of Nut & Bolts( Suitable size ) with washer suitable size for bracing .

Particulars of works.

Cartage of STP.SP-55. including Loading / Unloading from store centre at Haldwani to Khatima Sub Station Avg..load 60KM.

Cartage of P.C.C. Pole. including Loading / Unloading from store centre at Haldwani to Khatima Sub Station Avg.load 60Km.

Cartage of STP.SP-23. including Loading / Unloading from store centre at Haldwani to Khatima Sub Station Avg..load 60KM.

Cartage of small material . including Loading / Unloading from store centre at Haldwani to Khatima Sub Station.Avg..load 60KM.

Cartage of STP.SP-55. including Loading / Unloading and carriage load from work site dump store at Khatima to dofferent work site load distance 1KM-20Km.

Cartage of P.C.C. Pole.8.5Mtr long including Loading / Unloading and carriage load from work site dump store at Khatima to dofferent work site load distance 1KM-20Km.

Cartage of STP.SP-23. including Loading / Unloading and carriage load from work site dump store at Khatima to dofferent work site load distance 1KM-20Km.

Cartage of small material .including Loading / Unloading and carriage load from work site dump store at Khatima to different work site load distance 1KM-20Km.

Errection &of P.C.C. Pole 8.5Mtr long single pole inlcuding digging of pit size 0.6x0.6x1.5M. , filling earth,boulder,fixing of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Errection &of P.C.C. Pole 8.5Mtr long single pole inlcuding digging of pit size 0.6x0.6x1.5M. , filling earth,boulder,stone grouting, stone pad and kaing kicking block, fixing of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Errection &of ST Pole SP-55, single pole inlcuding digging of pit size 0.6x0.6x2.15M. , without grouting suppoting proper level and alignment alongwith fitting of all accessories like top channel with the cost of required cement, sand stone with fixing of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Errection &of ST Pole SP-55, Double pole inlcuding digging of pit size 0.6x0.6x2.15M. , without grouting suppoting proper level and alignment alongwith fitting of all accessories like top channel with the cost of required cement, sand stone with fixing of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Errection &of ST Pole SP-55, Tri pole inlcuding digging of pit size 0.6x0.6x2.15M. , without grouting suppoting proper level and alignment alongwith fitting of all accessories like top channel with the cost of required cement, sand stone with fixing of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Errection &of ST Pole SP-55, Four pole inlcuding digging of pit size 0.6x0.6x2.15M. , without grouting supporting proper level and alignment alongwith fitting of all accessories like top channel bracing & clamps with the cost of required cement, sand stoneupto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Errection &of ST Pole SP-23, Double pole inlcuding digging of pit size 0.6x0.6x1.5 M.Grouting stone pad and making kicking block inE&B, fitting of all accessories like top channel bracing & clamps with the cost of required cement, sand stone upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Febrication and fixing of channel/bnracing complete for double pole 100x50mm.incouding fixing of channel with clamps including cutting, drilling holes and fabrication as requrired and direction of Engineer-In-Charge.

Errection & grouting of Stay set including diffing of pit size 0.60x0.60x1.5 Mtr. With stay rod 16x1800mm., stay wire 7/8 swg. With proper nozzeling with back filling of pit with CC 1:4:8 in bottom of pit stay wire 7/8 SWG( Stay set and stay wire will be provided by the department ) and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60x0.60x0.60 Mtr. and earth filling complete in all respect with cost of cement , sand , & stone ballast and supply and fixing of all other items with stay clamps, stay elbow including proper nozelling etc. required for proper completion of work, as per direction of Engineer- In- charge.

Fixing of 11KV. X-arm angle including drilling hole and fabrication as required material.

Fixing of Special type of bracket for composite line.

Fixing of Aluminium Crimping lugs suitabnle for HT&LT sides Transformers.

Laying , sprreading, stringing and sagging of 11KV.AB Cable Cable by providing proper sag including handing on suspension clamp etc fixing of T connector and hositing on dead end clamp with continous earth wire complete work upto energisation,including removing old conductor including fixing of all accessories with binding & jumpering in canal section.

Laying , sprreading, stringing and sagging of 11KV.line on ACSR dog conductor by providing proper sag including binding etc. fixing of 11KV. pin insulator and hositng of disc insuoator. as per RESPO specification

Laying , sprreading, stringing and sagging of L.T .line on ACSR weasel conductor wire by providing proper sag including binding etc. fixing of L.T. clamp & insulator complete work as per RESPO specification. 3 phase 4 wire.

Laying , sprreading, stringing and sagging of LT .line on ACSR wesel conductor wire by providing proper sag including binding etc. fixing of L.T. clamp & insulator complete work as per RESPO specification. 2 phase 3wire.

Laying , sprreading, stringing and sagging of LT .line on ACSR wesel conductor wire by providing proper sag including binding etc. fixing ofL.T. clamp & insulator complete work as per RESPO specification. 1 phase 2wire.

Laying , sprreading, stringing and sagging of L.T. A.B. Cable 1x120 sq.mm. complete work as per RESPO specification.

Shifting charges of existing 11/0.4 KV. Tranformers with L.T. Cable to new Double pole plinth with help of hydra,chainpulley, Crain & labour etc.Fabrication of complete DP with complete fixing of all accessories, earthing including LA., 25KVA.

Shifting charges of existing 11/0.4 KV. Tranformers with L.T. Cable to new Double pole plinth with help of hydra,chainpulley, Crain & labour etc.Fabrication of complete DP with complete fixing of all accessories, earthing including LA., 63KVA.

Shifting charges of existing 11/0.4 KV. Tranformers with L.T. Cable to new Double pole plinth with help of hydra,chainpulley, Crain & labour etc.Fabrication of complete DP with complete fixing of all accessories, earthing including LA., 100KVA.

Shifting charges of existing 11/0.4 KV. Tranformers with L.T. Cable to new Double pole plinth with help of hydra,chainpulley, Crain & labour etc.Fabrication of complete DP with complete fixing of all accessories, earthing including LA., 160KVA.

Painting of S.T. Pole Structure one red oxide & trwo coat aluminium paint.

Guarding of Line over(Road/LT line/over constructed buklding crossing as per drawing with 6/8 SWG, G.I. Wire including fixing of guarding channel/angle as per direction of Engineer-In-Charge.

Fixing of triangular type Guarding bracket with supporting angle at middle position in 33KV.linewith complete fitting by mean of clamp Nut bolt & welding as per site.

Construction of transformetr plenth ( 7x4x3)fit, filled by concrete andmud, with matrerial, including cartage of material.

Installationof mesh fecing arout DT for protection of DT having gate and lock arrangement ( 9x5x4 fit).

Dismentaling of old poles by dydra loading in tractor/truck includking removing of conductor, carriage loading, unloading upto JE store.

Dismentaling of old ACSR conductor 11KV/LT line including removing of conductor making roll, safe carriagfe loading unloading upto JE Store ( 11KV & L.T. conductor line )

Cartage of old ACSR conductor from JE store to store centre including loading & unloading at both end ( 11KV and LT conductor line )

Cartage of old ACSR Conductor from JE store to store centre including loading & unloading at both end ( 11KV and LT conductor line )

Cartage of old damaged poles from JE store to store centre including loading & unloading at both end ( 11KV & LT conductor line )

Cartage of old damaged poles from JE store centre including loading & unloading at both end( Agriculture feeder )

Dismentaling of old poles by hydra loading in tractor/truck including removing of conductor, carriae loading unloading upto JE store ( agricultrure feeder )

Cartage of old scrap material from JE store to store centre including loading and unloading at both end( Agriculture feeder )

TNK Electricals

ASHOK KUMAR AND CO