Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-AOC BLDG NO XXVIII 378A NORTH CHAMPANOOR ANGAMALI SOUTH P O PIN 683 573 | ANGAMALI | ERNAKULAM | KERALA | 683573 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹21.4 L+₹1.2 L (5.96%)Rejected-AOC THOTTAPALLY HOUSE EMILY P O KALPETTA WAYANAD DT | KALPETTA | WAYANAD | KERALA | 673121 | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹23.6 L+₹3.5 L (17.2%)Rejected-AOC CHOORAKULATH NEAR GOVT HOSPITAL KUMBALANGHI KOCHI 682 007 | KOCHI | ERNAKULAM | KERALA | 682007 | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹23.7 L+₹3.5 L (17.6%)Rejected-AOC KORAMANGALATH HOUSE TOMY LANE SOUTH PANAMBILLY NAGAR KADAVANTHRA P O KOCHI 682 020 | KOCHI | ERNAKULAM | KERALA | 682020 | L4 | Rejected-AOC Not being L1 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
15 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I)(CG)KOCHI
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
IMPROVEMENT TO ADMIN BUILDING AT CGAE KOCHI
2023_MES_575701_1
8833/E8
Open Tender
Civil Works
Item Rate
180 days
NEDUMBASSERY
As per NIT /Tender document
8 documents required · 8 mandatory
₹500
Yes
GE(I)(CG)KOCHI
₹48,000
Yes
7 Mar 2023
18 Jan 2023
22 Feb 2023
18 Jan 2023
15 Feb 2023
1 Feb 2023
18 Jan 2023 - 25 Jan 2023
Amount
SCHEDULE 'A' PART-I(B/R WORKS)
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour for 100mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.
Material and labour for light shade vitrified ceramic tiles 8-10 mm thick polished area of each tiles exceeding 0.42 Sqm but not exceeding 1 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: The Colour,shade and pattern shall be approved by the GE during execution work. No extra cost sahll be allowed for removing and refixing and necessary cutting of door etc if any required during execution of work.
All as per item No.3 above but in vertical surfaces like skirting / dado over and including 10mm thick backing coat in CM 1:3 etc all as specified and directed. NOTE: The Colour,shade and pattern shall be approved by the GE during execution work. No extra cost sahll be allowed for removing and refixing and necessary cutting of door etc if any required during execution of work.
Material and labour for seamless plaster of paris false ceiling comprising of Gl frame work with Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI adjustable strip suspenders up to 1200mm long fixed to roof slab(using concrete drill) by suitable GI fasten with and including panel for ceiling (12mm thick Plaster of Paris board seamless 1200mmx1800mm size) with self-tapping screw finishing covering the joints with fiber tape and ceiling compound 48 mm wide fibre tape to provide seam less finish and surface finish as specified (particular specification 18.2 ) completely all as specified and as directed. Note: The rate is inclusive of frame work, POP panel and surface finish nothing extra shall be paid on this account
Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 meter in depth and getting out excavated earth, forming bottom surfaces to required level complete all as specified and directed.
Material and labour for precast cement concrete solid block masonry using Solid PCC block type C4 exceeding 10 Cm width, built in cement mortar 1:6 all as specified and as directed.
Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for preparing of new surfaces of any description and applying two coats of acrylic distemper, white or tinted over a coat of primer after applying one or more coat of wall putty to achieve smooth surfaces on plastered wall surface complete all as specified and as directed.
Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger
Returning, filling, including spreading leveling, watering and well ramming in layers not exc 25 cm thick in soil all as specified and directed.
Removing excavated soil to a distance not exc 50m and deposited where as directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
Material and labour for Drilling of holes of suitable dia, intothe RCC Column/Beam of security wall for insirting 12 MM dia Reinforcement bars and fixing the reinforcement bars into the holes using LOCK FIX chemical for firmly fixing the bars in to the holes complete all as per manufacturers instructions and as required at site complete all as specified and as directed. Note: Reinforcement shall be measured and paid seperately under relevant items of schedule.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in beams, lintels over 1.5 M span and similar work complete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns and similar work complete all as specified and as directed.
Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour for TMT (CRS/HCR) bar 6 to 8mm dia, cut to length, bent to shape required including bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia complete as in reinforcement complete all as specified and as directed.
Use and waste for form work to sides and soffits of beams, lintels etc, fair finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to sides and soffits of chajja, troughs and similar works finished fair surfaces, flat complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, rough finished surfaces of concrete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in chajja, troughs and similar work complete all as specified and as directed.
Material and labour for 15 to 18mm thick mirror polished green marble stone slab as in window cills, vertical jambs and soffits etc, exposed edges shall be chamferred and polished to receive aluminium joinery over 10mm thick plaster in CM 1:4 jointing and pointing in neat cement slurry mixed with pigment to match complete all as approved and directed by Engr-in-Charge. Note : (i) Not more than 2 pieces in cill/jambs shall be used and single piece without any joint shall be provided in post/ columns and vertical surfaces. (ii) Stone slab in cills shall be provided in stepped fashions/pattern to avoid splashing of water inside.
Supply and fix aluminium powder coated frame for dorr/window/ventilator using standard aluminium section one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Glass panel/particle board panel filling shall be measured and paid separately.
Supply and fix powder coated aluminium window shutters, aluminium section weighing 0.55kg/m in three track sliding window in which two shutters including necessary joining cleats, glazing clips, rubber neoprene packing, handles 01 No in each shutter, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. Note : Glass panel filling shall be measured and paid separately.
Supply and fix 4mm thick float glass in squares exceeding 0.5 Sqm in each pane including rubber neoprene packing etc complete all as specified and as directed.
Supply and fixing for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix 10mm thick toughened glass, crystal polished in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge.
Supply and fix 12mm thick tinted toughened glass frameless panel fixed with 304 grade stainless steel patch fittings complete all as specified and as directed by Engineer in Charge.
Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST
Supply and fixing venetian blind(vertical blind) using nylon fabric of approved colour and pattern (Colour and pattern consist of combination of two or more colours)100mm wide and length as per requirement including powder coated aluminium channel with operating nylon rope etc and making good disturbed surface all as directed.
SCHEDULE 'A' PART-II(E/M WORKS)
Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable FRLS upto and including working voltage 1100volts grade, ISI marked, drawn through and including non metalic rigid PVC conduit including all accessories such as bend, tee, junction boxes, elbows etc concealed including modular steel terminal sunken boxes for fixing modular fittings of size 1.2mm thick fixed with brass screws and unsheathed copper conductor stranded cable FRLS earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm cross sectional area and all other metal parts with earth dolly for following complete all as specified and as directed:-
(a) one light point or fan point controlled by one switch 6 Amps.
(b) one fan point or fan point controlled by one switch 6 Amps.
(c) one 3 pin socket outlet 6 Amps on independent board
(d) one 3 pin socket outlet 6 Amps on same board
All as per Item No.32 above, but 4 Sqmm size copper conductor cable FRLS and 4 Sqmm copper earth wire cable FRLS drawn through PVC conduit suitable size including provision of conduit and conduit accessories for power point/AC point on independent board.
Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.
Supply and fix Modular socket outlet 6A, 2/3 pin Module complete all as specified and as directed.
Supply and fix Modular switch socket combination one way 2/3 pin 6A, 3 Module complete all as specified and as directed.
Supply and fix Modular switch socket combination one way 6 pin 16A, 3 Module complete all as specified and as directed.
Supply and fix modular electronic fan regulator, 1250W 250V stepped type, 2 module complete all as specified and as directed.
Supply and fix Ceiling rose in polycarbonate 3 plates flush type 6 Amps, 230 volts AC complete all as specified and directed.
Supply and fix LED tube light fitting with tube decorative ultra slim round profile LED lighting fixtures 18 Watt with extruded polycarbonate, envirmental friendly energy efficient ready to use pack, accessories prewired and connecting up complete all as specified and as directed. Make : Cat No. LHEXBLP5PN1W018 of Havells or Equivalent in Crompton Greaves/Philips/Wipro
Supply and fix LED recess suitable for false ceiling 2 ft X2 ft, 40 watts , 240 volts AC supply with high efficiency diffuser softglare free light and connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make : Cat part No PLANO2X2PLR42WLED865S of Havells or Equivalent in Crompton Greaves / Philips.
Supply and fix Bulk head luminaire with opal diffuser with energy saving new generation 10 Watt LED lamp, IP 65 protection all as specified and as directed. Make: Cat No. BIBWP 10W LED (white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix energy efficient BEE 6.00, 6 star rated high speed BLDC ceiling fan with remote, air delivery 210 CFM, 1200mm sweep, including motor-blade set, downrod, shackle, assembly kit, canopy , remote etc, Operating voltage 230 volt single phase complete all as specified and as directed.
Supply and fix single pole and neutral enclouser with a two pin and earth plug and socket complete with and including one MCB single pole 20 Amps curve C complete all as specified and directed.
Supply and fix MCB SP, 240 Volts, 6 to 32 Amps, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.
Supply and fix MCB SPN, 240 Volts, 40 Amps, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.
Material and Labour for Sub main wiring using 2 runs of PVC insulated cable(FRLS) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FRLS) using as earth wire and drawn in to and including rigid conduit including all accessories as bend,tee,junction boxes elbows etc complete all as specified and directed. Note : 3 runs of 6 Sqmm cable and PVC conduit shall be measured one unit length.
Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double door protection, neutral bar, earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and as directed. NOTE: MCBs shall be measured and paid separately.
Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 12 way with 200 Amps rated copper bus bar double door protection, neutral bar, earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and as directed. NOTE: MCBs shall be measured and paid separately.
SHAIJAL T M
Classic Builders
K.V.GEORGE AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .