Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹47.5 L+₹1.5 L (3.24%)Rejected-Finance 1 A BASEMENT 30 31 RAJA HOUSE NEHRU PALACE NEW DELHI 110 019 | SOUTH EAST | DELHI | 110019 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹50.2 L+₹4.2 L (9.09%)Rejected-Finance 1 128 A SECOND FLOOR MOHAMMADPUR NEAR BHIKAJCAMA PLACE NEW DELHI 110066 | NEW DELHI | NEW DELHI | DELHI | 110066 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹52.4 L+₹6.4 L (13.9%)Rejected-Finance 12 BHARTI AARTIST COLONY VIKAS MARG NEW DELHI 110092 | EAST | DELHI | 110092 | L4 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | MONA GENERATOR SEVICES PVT. LTD. L2 | Vijaypower Generators Limited L4 | M/s Dhapola Elevator and Engineering L3 | MM Engineers L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in loose/ soft soil and getting out for under ground cable/ erection of poles stays etc complete all as specified and directed. | 53 | Cubic Metre | 145 ₹7,685 | 300 ₹15,900 | 850 ₹45,050 | 100 ₹5,300 Lowest |
| 2.00 | Material & labour for sand cushioning with clean dry sand to cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable complete all as specified and directed.
Note : For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I. | 16 | Cubic Metre | 871 ₹13,936 | 600 ₹9,600 | 890 ₹14,240 | 480 ₹7,680 Lowest |
| 3.00 | Material & labour for Sub class 'B' brick for covering to under ground cable laid dry flat transversally width equal to the length of the cable complete all as specified and directed. | 1.7 | 1000 Nos | 9,679 ₹16,454.3 | 6,000 ₹10,200 | 1,160 ₹1,972 Lowest | 4,550 ₹7,735 |
| 4.00 | Material & labour for Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. | 33 | Cubic Metre | 74 ₹2,442 | 21 ₹693 | 230 ₹7,590 | 1 ₹33 Lowest |
| 5.00 | Material & labour for Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. | 19 | Cubic Metre | 39 ₹741 | 21 ₹399 | 1,850 ₹35,150 | 1 ₹19 Lowest |
| 6.00 | Supply, installation, testing and commissioning silent diesel Engine driven generating set, fully wired alternator AC to give an output of 400 KVA/ 320 KW continuously rating at a PF of 0.8 lagging, 415 Volts AC 3 phase 4 wire 50 Hz +/-1% supply, 1500 RPM, directly coupled with diesel engine specification complying BS 5514, ISO 3046 , IS 1460 , ISO 9001 , ISO 8528 & IS 13018.DG Set shall be water cooled mounted on Channel section iron common base frame with AC Alternator complete with fuel tank provided within canopy on base frame (Service tank) of adequate capacity with fuel line and accessories, including PCC /RCC foundation work as per manufacturer instructions, vibration and damper pads (AVM), control panel with necessary meter and sound proof canopy as per CPCB-IV norms and other accessories etc comprising of the following:- | 1 | Each Set | 44,27,128 ₹44,27,128 | 49,01,001 ₹49,01,001 | 46,58,000 ₹46,58,000 | 44,00,050 ₹44,00,050 Lowest |
| 6.01(I) Engine :- (a) HS Diesel driven 8 cylinder, in-line 4 stroke, radiator cooled with blower fan engine and fully controlled by Electronic Engine control module (b) Air handling system with dry type, Replaceable paper element air cleaner with restriction indicator & Air to air aftercooler (c) Turbocharger, electrical lift pump for faster response (d) Fuel injection pump system with electronic governing (e) Dual fuel filter system: Pre & main filter including water separator and Water in Fuel sensor. (f) Integral set-mounted radiator system, designed for 50°C ambient temperature (g) Full flow spin on lube oil filter with plate type lube oil cooler. (h) 2 No of 12 V 150 AH DC lead acid batteries having 4 year warranty with terminals and spare cables. (j) Electrical starter motor with soft start engagement feature (k) Bty charging alternator , 12 V DC Self starter, Fuel pipe C Class STIC of suitable size. (l) Emergency stop button (m) Compression ratio : 16.8 :1 (n) Bore and stroke :-130x150 mm | |||||||
| 6.02(II) Alternator :- (a) Brushless Excitation type, Screen protected, Revolving field, Self excited alternator conforming to IS4722,IS 13364 Suitable rated at 0.8 PF, 415 V- 440 V, 3 Phase, 4 wire 50 Hz, at 1500 RPM, self excited and self regulated with AVR, screen protected, drip proof, suitable Insulation class, self ventilated for engine as mentioned here in before (b) 3 Phase reconnectable copper winding with terminals brought out for connection (c) Sealed bearings for alternator (d) Having IP 23 Enclosure, H Class of insulation, voltage regulation ±1% (e) unbalance load capability :- 25 % of rated current. | |||||||
| 6.03(III) DG Control Panel :- (a) Control panel is made up of 14/16 gauge CRCA sheet and is powder coated for weather-proof consists of the following parts :- (b) Micro processor based DG Controller module system to set monitoring, metering and control system with LCD display such as the following parameters:- Control System : Digital AVR, Digital electronic governing & Remote start-stop Engine metering: : Oil pressure, Coolant temperature, Battery voltage, Engine speed Alternator metering : Line to Line Voltage and Line to Neutral Voltage, Current (single and 3 phase), Volt-Amperes (phase and total) and Frequency. (c) Aluminum bus bars with suitable capacity with incoming/ outgoing terminals (d) Indicating lamps for ‘Load ON’ and ‘Set Running’ . (e) Instrument fuses duly wired and ferruled . (f) MCCB of suitable rating with overload and short circuit protections. (g) CT of suitable ratio-03 Nos (h) One set of instruments MCBs (i) Necessary PCC work | |||||||
| 6.04Engine protection: Low lube oil pressure, High/Low coolant temperature, Over speed, Bty Over/Under/Weak Volts, Fail to crank/ start, Sensor failure. AC Alternator protection : Over/Under voltage, Over/ Under frequency, Over current, Short circuit and Loss of AC sensing. Data logging: Engine hours, Control hours, Engine starts and upto 10 recent fault codes , 12 /24 Volt DC operation Sleep mode. | |||||||
Tender Value
₹45.0 L
EMD Value
₹89,940
Closing Date
5 Nov 2025, 6:00 pmClosed
GE UTILITY AMBALA
GE UTILITY AMBALA CANTT 133001
PROVN OF DG SET 400 KVA CAPACITY FOR MH AMBALA UNDER GE UTILITY AMBALA CANTT
2025_MES_721253_3
CA NO GE U AMB 53 OF 2025-26
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹89,940
29 Dec 2025
15 Oct 2025
7 Nov 2025
15 Oct 2025
5 Nov 2025
22 Oct 2025
15 Oct 2025 - 17 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
1.60 MB
BOQ
BOQ • 0.75 MB
Tender Documents
Tender Documents • 0.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .