Gabuwa Khas SVS WS Scheme Block Kotabagh Nainital

Amount

INTAKE/SOURCE WORKS

Supply of all materials, labours & T&P etc and construct following works as per type design and drawings complete - French Well 250mm dia

Random Rubble Stone Masonary laid in 1:6 cement and sand mortar, in brest walls, retaining walls, parapets, scuppers, etc including supply of all materials, royalty, labour T&P etc.

OVER HEAD TANK WORKS

Soil testing , Design of OHT, Supply of all Materials , Labours ,T&P etc. and Construction of RCC O.H.T of capacity 50 KL and 15m Staging with 1.00m wide RCC staircase from G.L. to balcony and from balcony to Top Dome including 1m x 1m RCC landing at suitable locations and railed with 3 rows of 20mm dia. G.I. (M) pipe on 65x65x5mm angle iron posts till Top dome & on Top dome, fixed with M.S. ladder to the top dome & to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of DI K-9 outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials), flooring, 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S, M.H. cover , ventilator, columns etc. complete with approved water proofing ( apex)/ emulsion paint, testing, filling & arranging water for water tightness testing purpose etc. including supply of vertical pipes and specials assuming bearing capacity as 8MT/M2.

Construction of masonry type chamber for sluice valve Size as per type design

RISING MAIN

Providing of all materials, carting from site store to site of work, Lowering into trenches with true alignment, Laying & Jointing of full length S&S Centrifugally Cast (Spun) / Ductile Iron Pipes including supply of ''EPDM" rubber gaskets conforming to IS : 5382-1985 with testing of pipe line complete.DI K-9 pipe confirming to IS:8329/2000 : 100 mm dia

Providing push-on-joints to Centrifugally (spun) cast Iron pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket: 100 mm dia

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000

Excavation in soil mixed with single boulders etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

CWR/SUMP WORKS

Supply of all materials, labour T&Petc complete to construct CWR as per drawing includung all pipes & fittings complete. Capacity of CWR/SUMP 30 KL

Supply & fixing of chlorinating arrangement of 25 litre capacity over CWR roof slab. Including supply of all materials & labours as per type design & drawing complete.

Random Rubble Stone Masonary laid in 1:6 cement and sand mortar, in brest walls, retaining walls, parapets, scuppers, etc including supply of all materials, royalty, labour T&P etc.

REPAIRING WORKS

Repairing of Existing CWR including plastering, painting etc.

Repairing of Existing 175KL OHT 20 mtr staging on the basis of inspection and Non-destructive evaluation testing report of OHT by IIT Roorkee or any other technical institution of same repute like NITs as per approval of Engineer on contractor's cost and Pump House 3 mtr X 3.5 mtr. including all major and minor structural & finishing repairs and painiting of over head tank & pump house making tank totally waterproof and leakage-less with all repair work done all complete including 5 years maintenance.

Repairing of Existing Pump House 3 mtr X 3.5 mtr. including painiting, repairing of floor etc complete.

SUPPLY MAIN WORKS

Providing of all materials,Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes(including supply of all jointing materials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. G.I. pipe as per IS: 1239/ 1985 Part-I

40mm dia

50mm dia

Excavation of pipe line trench in following strata lift upto 1.5m lead upto 30m. including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60m from trenches including supply of labour, T&P etc complete.

Soil mixed with shingle Boulders

Ordinary Rock

Supply and fixing of valves in pipeline including cuting, threading of pipeline with fittings, materials, labours, T&P etc complete- Wheel valves (Class-I) as per IS: 788/1997

20mm dia

25mm dia

Supply and fixing of valves in pipeline including cuting, threading of pipeline with fittings, materials, labours, T&P etc complete- C.I. Air valves confirming IS: 789 15mm dia

Supply of all materials, labours, T&P. etc.and construct Gate valve chamber as per type design complete.

Supply of all materials, labours, T&P etc and construct air valve chamber as per type design complete.

Random Rubble Stone Masonary laid in 1:6 cement and sand mortar, in brest walls, retaining walls, parapets, scuppers, etc including supply of all materials, royalyilrs, labour T&P etc.

DISTRIBUTION SYSTEM WORKS

Providing, Supply and Carting from site store to site of work, Laying & Jointing of G.I. screwed pipes (including cost of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete. (G.I. Pipe Medium Quality IS: 1239)

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road

Dismantling and reinstatement of following type of road surface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials: C.C.Road (0.60 m x 2333.33 m)

Excavation in soil mixed with shingle boulder etc. requiring the use of specials T&P,if any, for pipe line trenches including lift upto 1.5m and lead upto 30m with back filling,watering,ramming of excavated earth in the trenches.

Supplying and fixing of following sizes of valves including carting the same upto site of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect - G.M Gate Valve IS 778 Vertical Check Class -1 / 50 mm

Supplying and fixing of following sizes of valves including carting the same upto site of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect Sluice valves (PN 1.60) - 80 mm

Supplying and fixing of following sizes of valves including carting the same upto site of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect Sluice valves (PN 1.60) - 100 mm

Constructing masonry Chamber for sluice valve/scour valve with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

Providing & Fixing Woltman type Bulk Water Meter Inline type, flange end with Integral mounted display and all necessary fittings

Providing Functional household tap connection including all material & labour all complete.

Shifting and fixing with all materials T&P labour Old Functional House Hold Tap Connection into new pipe line network etc complete.

DUTY ROOM (3.00m x 2.5m x 3m)

Supply of all Materials, Labours, T&P etc.and Construct a Duty room With Size (3.00m x 2.5m x 3m) as per Type Design and Drawing, all complete.

BOUNDARY WALL AND GATE

Supply of all labour, materials, and T&P etc. and construct boundary wall at proposed water works site.

Supply of all labour, materials, and T&P etc and privide 3.6 m wide M.S. gate with pillars as per departmental type design, at proposed water works site.

Supplying and filling in plinth with Jamuna sand including watering, ramming, consolidating and drassing complete in proposed water works.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S (non modular) bricks of Class designation 7.5

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)

Providing and Displaying Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc SUB HEAD : 16.0 ROAD WORK 282 Code Description Unit Rate No. chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.