Loading
Loading…
Loading…
Tender Value
₹3.9 Cr
EMD Value
₹7.9 L
Closing Date
25 Aug 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
18 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India. Note: The balance sheet and all financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN, Falling which the offer shall be considered as incomplete and will be Summarily rejected without any further reference
(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
(b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender,or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender,or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note b(i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria.
(b)(ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.
(b) (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tenderdocuments for evaluation of technical eligibility, shall be considered. The scope of work covered in otherremaining components shall be either executed by tenderer himself if he has work experience asmentioned in clause 7 (a) (ii) of Part-II of GCC or through subcontractor fulfilling the requirements as perclause 7 of Part-II of GCC or jointly i.e., partly himself and remaining through subcontractor, with priorapproval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of Part-II of GCC, with prior approval of Chief Engineer in writing.
Similar nature of work- Any work involving networking system using switches/ routers/ Wi-Fi/ IP based CCTV in any government organization/PSU.
After completion of the one-year warranty/maintenance period, AMC shall be commenced for a period of five years.
21 conditions · 5 needing a document upload
The following documents should be specified for submission along with tender:
LOA and Final bill copy of completed work whose credential submitted vide special technical criteria must be uploaded.
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor, a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement, receive money, witness measurements, sign measurement books, compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certified and refer all any disputes arbitration.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For those conditions for which standard formats have been given in the uploaded titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State , Central Govt. and any other local authority.
GST shall be applicable as per extant instruction on the subject.
Eligibility criteria for works tender in respect of partnership firms.
In case the tenderer is a partnership firms, the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as branch of trust and abandonment if the contract.
JOINT VENTURE will not be permitted for the tenders.
For standard Finance criteria and standard Technical - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi - government/public sector under takings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificate should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Earnest Money and Tender Document Cost: Payment of Earnest Money deposit (EMD) & Tender Document Cost (TDC) in respect of e-tendering, should be accepted through net banking or payment gateway only
Deposit Receipts, Pay Orders, Demand Drafts and Guarantee Bonds. These form of Performance Guarantee could be either of the State Bank of India or of any of the Nationalized Banks.
Note for Commercial compliance :-
BOOKS OF REFERENCE : These tender documents are to be read with the followings books with versions updated/corrected/modified up to the date tender opening:1) E. C. Railway Engineering Department- Standard General Conditions of Contract April 2022 as amended by updated correction slips termed GCC 2022.
In case of items C of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Provision of CCTV Cameras at 19 Nos. of Non-Interlocked Manned LC Gates in HJP- SPP-BCA-BJU section in Sonpur division.
SandT-SEE-E-OT-26-27-25
SandT-SEE-E-OT-26-27-25
Open
Works - General
9 Months
Saran, Bihar
₹0
₹7.9 L
31 Jul 2026
31 Jul 2026
11 Aug 2026
125 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,94,71,322.46 | ||
| — | — | — | Above/ 121968.98 Below/P | ||
| Casting, Concreting and Curing of foundation and Erection of Half size apparatus case (GKP-Type) as per DRG. No. SGW/MGS/L1/91 including cost of ALL materials required for Casting, concreting and curing and fixing of "E" type key lock. Inspection by Consignee. | — | 19.00 | — | — | |
| — | — | — | Above/ 906835.04 Below/P | ||
| Supply, Installation, Testing & Commissioning of Full HD Fixed Bullet type IP Colour Camera along with 128 GB or higher SD Card, housing and mount and all accessories required for installation purposes As Per RDSO specification No. RDSO/SPN/TC/65 /2021Version 6.0 or latest. Inspection by RDSO. | — | 76.00 | — | — | |
| — | — | — | Above/ 1337400.00 Below/P | ||
| Supply, Installation,Testing & Commissioning of Field Switch 8-POE port and 2 Nos. of 1G Optical port (required SFP module is also required to be provided) as per Spec. No: RDSO/SPN/TC/65/2021 Ver.6.0 or latest. Inspection by RDSO. | — | 60.00 | — | — | |
| — | — | — | Above/ 180600.00 Below/P | ||
| Supply and installation of 08 Channel NVR with 2 SATA Slots ONVIF support and 01 Number of Hard Disk capacity 4TB. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 135249.60 Below/P | ||
| Supply & Installation of Surveillance Hard Disk Drive 4 TB capacity as per technical specification. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 453904.74 Below/P | ||
| Supply & Installation of 64 Channel Network Video Recoder and 64TB storage after RAID 5/6 configuration with HDD(8 nos. of HDD capacity 8TB each), 2 nos. ethernet complete with all other accessories as per RDSO spec. No: RDSO/SPN/TC/65/2019 Rev.5.0 or latest. Inspection by Consignee. | — | 2.00 | — | — | |
| — | — | — | Above/ 188380.80 Below/P | ||
| Supply of 22" LED Monitor, MakeDell/Samsung or better. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 99187.04 Below/P | ||
| Supply of 4K UHD Display (55 inch) as per RDSO spec. No: RDSO/SPN/TC/65 /2021 Rev.6.0 or latest and refer technical specification. Inspection by Consignee. | — | 2.00 | — | — | |
| — | — | — | Above/ 1754.74 Below/P | ||
| Installation, Testing & Commissioning of Full HD Large Format Display Monitor (55 inch).All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. | — | 2.00 | — | — | |
| — | — | — | Above/ 494404.00 Below/P | ||
| Supply of On line pure sine wave UPS of 1KVA with SMF batteries. Minimum 1600VAH for backup of one hour. Make - Microtek or similar. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 97251.60 Below/P | ||
| Supply of Wireless Portable Router for internet connectivity with Integrated SIMcard slot High-speed 4G LTE/VoLTEconnections with downlink speed up to150 Mbps and uplink speeds up to 50Mbps, Wi-Fi speeds up to 300 Mbps FastEthernet WAN port, and four FastEthernet LAN ports. Make- D link/Tp link or similar. Inspection by Consignee. | — | 40.00 | — | — | |
| — | — | — | Above/ 188752.80 Below/P | ||
| Supply and installation of one Sim Card with one-year internet subscription. Inspection by Consignee. | — | 40.00 | — | — | |
| — | — | — | Above/ 83320.00 Below/P | ||
| Supply of 6U Rack with 19 inch standard dimension, wall mounting, front glass door with lock and two key, with rack fixing Multi point AC power strip, cable organiser with wall fixing screws.Make: CP Plus, D-Link, or better. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 3000.00 Below/P | ||
| Supply of RJ-45 connector. Make: D-link or better. Inspection by Consignee. | — | 500.00 | — | — | |
| — | — | — | Above/ 143040.00 Below/P | ||
| Supply of 10/100/1000mbps Media Converter (Single mode 20kms) with power adopters & others as per Specification Nos. RDSO/SPN/TC/103/2013 Rev.2 or latest. Inspection by Consignee. | — | 40.00 | — | — | |
| — | — | — | Above/ 115600.00 Below/P | ||
| Supply of 10m long OFC patch cord single mode simplex of different configuration SC-FC/LC-LC/LC-FC/LC SC/ SC- SC/FC-FC etc. Inspection by Consignee. | — | 100.00 | — | — | |
| — | — | — | Above/ 894360.00 Below/P | ||
| Supply of PIG Tail (10m Long) with FC/PC connector as per TEC specification no. G/OFJ-01/03 Jun'99 with latest amendments. (required accessories like 0dB etc. connector to be supplied by contractor). Inspection by RITES. | — | 1200.00 | — | — | |
| — | — | — | Above/ 67500.00 Below/P | ||
| Supply of 25 mm (1 inch) PVC conduit pipe rigid plain ended conduit size IS:9537 (part-3) or latest and 9537 (Part-1) 1980 with latest amendment ISI marked with minimum 1.2 mm wall thickness & minimum one socket atevery 3 meter pipe. Inspection by Consignee. | — | 2500.00 | — | — | |
| — | — | — | Above/ 120000.00 Below/P | ||
| Supply of STP (Shielded Twisted Pair) CAT-6 Cable compliant with TIA/EIA-568-B2-1 or latest. Inspection by Consignee. | — | 3000.00 | — | — | |
| — | — | — | Above/ 21000.00 Below/P | ||
| Supply of UTP CAT - 6 cable, having bare Copper Conductor of diameter 0.5 mm, Suitable for Gigabit Ethernet TEC Specification Nos. G/WIR 06/02 or latest. Inspection by Consignee. | — | 1000.00 | — | — | |
| — | — | — | Above/ 68870.00 Below/P | ||
| Supply of 6 Core Armoured Mono mode OFC cable as per latest TEC Specification or latest. Inspection by Consignee. | — | 2.00 | — | — | |
| — | — | — | Above/ 64000.00 Below/P | ||
| Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for Railway electrification area, shall be of reputed make like Delton, LAPP, Finolex, or similar. Inspection by Consignee. | — | 1000.00 | — | — | |
| — | — | — | Above/ 109186.80 Below/P | ||
| Laying of Optical Fibre cable through HDPE/Telecom duct for OFC by blowing as per detail in technical supplement/ latest railway guidelines and advised by site engineer. | — | 6000.00 | — | — | |
| — | — | — | Above/ 5854800.00 Below/P | ||
| "Excavation of Trench in all kinds of soil and refilling of trenches (1.2 Mtr, Depth, 300 mm Width) - without bricks.Note:- (I) Payment will be made as per actual work done on pro rata basis, if required depth is not available at site.(II) If the depth of trench is not uniform in a span of 100 mtr.or shorter length, if site condition demands along the cable run minimum depth will be taken for that particular stretch for payment." | — | 40000.00 | — | — | |
| — | — | — | Above/ 136000.00 Below/P | ||
| Chase cutting in floor/wall and restoring of floor/wall with plaster for concealing of 50 mm./25mm conduit pipe (covered separately) in floor/wall then painting with matching colour as per existing colour of the floor/wall. | — | 2000.00 | — | — | |
| — | — | — | Above/ 799240.00 Below/P | ||
| Reinstatement of platform and repairing to original state after cable laying work. | — | 2000.00 | — | — | |
| — | — | — | Above/ 1085060.00 Below/P | ||
| Excavation of trenchless track under Railway Track/Busy Road etc. at depth culvert/River, (IN HDD portion) laying of 100 mm dia GI PIPE/DWC pipe of medium grade in it (GI Pipe shall be supplied by the contractor & GI pipe should have provision of laying of of maximum 72 cores. ). Note:- Pipe inspection by consignee. | — | 1000.00 | — | — | |
| — | — | — | Above/ 191279.20 Below/P | ||
| Concreting on Railway cables/S&T gears in ratio of 1:2:4 using cement of good quality, sand, stone chips of size 12 mm to be used for concreting purpose along with related missionary work. All materials required for execution of the work will be supplied by the firm as per site engineer. This includes water curing of concreted portion for minimum 3 days. Note: Suitable arrangement for continuous water curing to be ensured. Associated work of digging etc. to be done by contractor. (Note: Qty "Cum" should be understood "Cub Mtrs") | — | 40.00 | — | — | |
| — | — | — | Above/ 7786350.00 Below/P | ||
| Trenching-Supply of HDPE telecom duct size - 40/33 (Outer/inner dia) as per RDSO spec no.(RDSO/SPN/TC/45/2013 Revision.2.0 or above) or ISI mark and trenchless trenching (by any means ) at the depth of 2.0 to 3.0 meter for laying of HDPE duct of size 40/33 mm or HDPE duct of size 110 MM and Blowing of OFC. Other HDPE pipe duct of size 40 / 33mm or 63 mm will be supplied by Railway if required for laying of signalling / telecom cable. Work will be executed as per site engineer. | — | 15000.00 | — | — | |
| — | — | — | Above/ 1160200.00 Below/P | ||
| Supply of DWC pipes (ISI mark) confirming to Sepc no. IS-14930,part -II of length 6 meter and 120mm outer and 103.5mm inner dia. with one snap fit coupler with rubber ring,spacer,band ,endcap one v end and one T coupler for under ground power/signal/Tlecom cable protection.Make-Rex,Duraline, or Similar. Inspection by RITES. | — | 1000.00 | — | — | |
| — | — | — | Above/ 109180.00 Below/P | ||
| Installation of Double Wall corrugated (DWC) pipe with socket coupler.The includes (1.2 mtrs) Depth and backfilling. | — | 1000.00 | — | — | |
| — | — | — | Above/ 5312558.50 Below/P | ||
| Supply & laying of HDPE pipe/telecom duct (outer dia 40mm As per generic requirement No.G/CDS- 08/01 Dec 99 or latest at a depth of 1.2 mtr in all type of soil. This includes transportation of HDPE/Telecom ducts from the Railway store to the site and returning left over materials to the Railway store.) a) Supply. Inspection by RITES(for supply portion). | — | 50.00 | — | — | |
| — | — | — | Above/ 501135.00 Below/P | ||
| Supply & laying of HDPE pipe/telecom duct (outer dia 40mm As per generic requirement No..G/CDS- 08/01 Dec 99 or latest at a depth of 1.2 mtr in all type of soil. This includes transportation of HDPE/Telecom ducts from the Railway store to the site and returning left over materials to the Railway store.(b) Execution. | — | 50.00 | — | — | |
| — | — | — | Above/ 164520.00 Below/P | ||
| Supply of 24 Fiber OFC Joint Closure as per Specification Nos. RDSO/SPN/TC/68/ 2014 Rev 1.0 or latest complete with all accessories including sealing with mechanical clamp facility. Inspection by Consignee. | — | 40.00 | — | — | |
| — | — | — | Above/ 1263579.60 Below/P | ||
| Supply & installation of OFC joint closure as per Tech. Spec. No.G/OJC-02/01Mar'99 with latest amendments & splicing of 24 Fibre Optic Fibre Cable this includes of jointing pit (RCC & Pre-fabricated) & testing and keeping in the pit then filling the pit with sand. The work will be done as per technical specifications and as advised by site engineer. Inspection by RITES. | — | 40.00 | — | — | |
| — | — | — | Above/ 145960.00 Below/P | ||
| Supply of Fibre Distribution Management system (FDMS)/LIU for 24 Fiber complete with all accessories such as patch cord & pigtail etc. as per TEC Spec. GR/FDM/01/02 April'2007 or latest. This includes supply of installation accessories as per technical specification. Inspection by Consignee. | — | 40.00 | — | — | |
| — | — | — | Above/ 160840.00 Below/P | ||
| Installation, splicing and commissioning of Fibre Distribution Management system (FDMS) for 24 Fiber complete with all accessories such as patch cord & pigtail etc. as per TEC Spec. with latest amendment. The sundry material if required any to be supplied by contractor. | — | 40.00 | — | — | |
| — | — | — | Above/ 152000.00 Below/P | ||
| Splicing of Optical Fiber Core and routing in joint closure/FDMS as per instruction of site Engineer. Inspection by Consignee. | — | 1000.00 | — | — | |
| — | — | — | Above/ 195415.20 Below/P | ||
| Supply and installation of RCC Route Markers including Painting. Inspection by Consignee. | — | 240.00 | — | — | |
| — | — | — | Above/ 426807.60 Below/P | ||
| Supply of half size location box as per design of GKP signal workshop and Drg. No.SW/AC/2004/21 or latest. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 65999.60 Below/P | ||
| Supply of E-type lock without key, spec. no. IRS-S-30, Drg. No. S-3376/M key - S- 3377/M. Individual number of miniature E locks and Normal size of locks required at site to be decided by the site engineer as per site requirement. Inspection by Consignee. | — | 40.00 | — | — | |
| — | — | — | Above/ 4955.20 Below/P | ||
| Key for E-type lock supplied above. Inspection by Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 14851.60 Below/P | ||
| Painting of location two coats of enamel paint over one coat of red oxide primer and there after numbering on the following items after scrapping & cleaning of the surface where ever necessary. Primer and paints both Asian paint or similar make are to be supplied by the contractor. Numbering is as pr practice of the ECR and directives of the site Engineer. Location boxes inside & outside surfaces with Aluminium paint. (Single Case). | — | 20.00 | — | — | |
| — | — | — | Above/ 17884.00 Below/P | ||
| Supply and fixing of PVC Casing and caping of 50 mm x 50 mm x I.5 mm thickness with cover on wall/Roof/Partition etc as per IS 14927 Part 1 or latest (All the miscellaneous materials required for fixing to be supplied by the contractor). Inspection by Consignee. | — | 200.00 | — | — | |
| — | — | — | Above/ 1400000.00 Below/P | ||
| Supply & installation of Off-Grid Solar Photovoltaic (PV) Power Plant, Capacity - 1KVA. Make - Sunlight Infra Energy or equivalent. | — | 20.00 | — | — | |
| — | — | — | Above/ 147866.36 Below/P | ||
| Supply and erection of 15 feet GI pipe of 4'' dia of medium quality ISI No 1230 (part 1) 1990.Having iron base plate 10mm thick 30cm x 30cm weild at the bottom of the pipe with 4 supports of iron bars of size 10mm dia. The 3 feet pipe shall be burried in the ground and 12 feet shall be above the ground. The work includes digging of pit on platform, laying of cable, erection of pole, filling the pit with 1:3:4 cement, concrete and sand. Final plastering should be done on the surface. The iron bracket on the top of the pole shall be provided for the fixing of CCTV camera and junction box/6U outdoor cabinate etc.(Necessary fixing and other materials required for fixing should be brone by the contractor). Inspection by Consignee. | — | 38.00 | — | — | |
| — | — | — | Above/ 887661.88 Below/P | ||
| Supply of Optical Time Domain Reflectometer (OTDR) for 1310/1550nm fiber with resolution of 60 Cms,dynamic Range of 31/29 dB with all accessories confirming to TEC Specification NoTEC Specification No G/OTD/02-03 March 2009.Make EXFO Model MAX 720C , AQ- 7270+735022.Make Yokogawa Electric Co Ltd Japan or Similar . Inspection by RITES. | — | 2.00 | — | — | |
| — | — | — | Above/ 299037.74 Below/P | ||
| Supply of Single fiber fusion splicing machine similar to fujikura 80C with standard accessories :ACADAPTER /BATTERY Charger, AC Power Cord, Spare Electrode, Carrying case, USB cable, Sleeve loader, Dispenser, Screw driver, BATTERY PACK, Battery charger cord, High precision Fiber cleaver, 3 in-1 Stripper & Protection sleeves (A demo shall be arranged along with supply) as per TEC Specification g/osm/01-03 April 2005 Model S-177A. Make - FURUKAWA ELECTRIC COJapan. Type approved or Similar. Inspection by Consignee. | — | 1.00 | — | — | |
| — | — | — | Above/ 519627.13 Below/P | ||
| "Cable route tracer as per latest technical specification No.G/TIE/-01/02 Oct 99 with latest amendment No. 1 date 29-0-200 & 03/06/2004, Telemetrics Model-CR. Inspection by RITES." | — | 1.00 | — | — | |
| — | — | — | Above/ 281815.48 Below/P | ||
| Cable Fault Locator (Digital) as per latest technical specification No. G/TIE/-01/02 Oct 99 with latest amendment No. 1 date 29-09-2000 & 03/06/2004 Inspection by Consignee. | — | 1.00 | — | — | |
| — | — | — | Above/ 16632.88 Below/P | ||
| Earth resistance tester, 1000 Ohm with rechargeable battery with kit for earth resistance Fluke /Motwane /Sigma). Inspection by Consignee. | — | 2.00 | — | — | |
| — | — | — | Above/ 33630.00 Below/P | ||
| Supply of LCD Passive Optical Network Power Meter. Inspection by Consignee. | — | 3.00 | — | — | |
| — | — | — | Above/ 265448.70 Below/P | ||
| Supply and testing of optical Laser light source of Make- JDSU Model: OLS-35 or latest or having similar specification of reputed make. Inspection by Consignee. | — | 3.00 | — | — | |
| — | — | — | Above/ 24786.01 Below/P | ||
| Supply of TMS kit (digital DB meter with oscillator) as per RDSO Spec. No. IRS/TC/43- 87 or latest. Inspection by Consignee. | — | 1.00 | — | — | |
| — | — | — | Above/ 8863.95 Below/P | ||
| Supply of LAN Tester. Make - Taparia / Krone / Fluke or similar. Inspection by Consignee. | — | 5.00 | — | — | |
| — | — | — | Above/ 1198.15 Below/P | ||
| Supply of Krone Plastic 4 mm Crimping Tools Make:-Krone or similar. Inspection by Consignee. | — | 5.00 | — | — | |
| — | — | — | Above/ 10148.00 Below/P | ||
| Supply of Dual Voltage 100V/500V - 100M/200M Ohm's Analog Insulation Tester metal body hand driven with accessories carriying case and testing lead. Make - Shanti, ITMR-2- 51102 or similar. Inspection by Consignee. | — | 2.00 | — | — | |
| — | — | — | Above/ 50489.13 Below/P | ||
| Supply of Optical Power Meter,type-B, as per TEC spec. GR/OPM-01/03 Feb. 2005 or latest. Inspection by Consignee. | — | 3.00 | — | — | |
| — | — | — | Above/ 52277.00 Below/P | ||
| Supply of Digital Multimeter 3 & 1/2 digit auto ranging digital multimeter with AC/DC current & resistance +analog + diode + contionity + capacitance + frequency + Min/Max storage + data hold + temp + duty + rubber hoiser. Inspection by Consignee. | — | 5.00 | — | — | |
| — | — | — | Above/ 96168.00 Below/P | ||
| Supply, Installation & Commissioning of industrial grade 8 Port Router as per Specification Nos. RDSO/SPN/TC/84/2008 or latest with accessories. Inspection by Consignee. | — | 1.00 | — | — | |
| — | — | — | Above/ 227940.00 Below/P | ||
| Supply of 1.25G SFP+ Small form-factor pluggable transceiver Brand: syrotech or similar. Inspection by Consignee. | — | 60.00 | — | — | |
| — | — | — | Above/ 3703550.41 Below/P | ||
| AMC of CCTV camera system installed at above LC Gates and related equipment installed at connecting station for 5-years. (As per the details provided in the attached Annexure-Z for AMC) | — | 5.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
I_CT_GCC-
ATTACHMENT
Tender Document
ATTACHMENT
Full Notice
ATTACHMENT
ACS1TO10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22_1.pdf
ATTACHMENT
T-26-27-25TenderDocument-CCTVat19Nos.LCGate.pdf
ATTACHMENT
T-26-27-25FullNotice-CCTVat19Nos.LCGate.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].