Construction of Govt. Ayurvedic Dispensary Building at Tajwan in Tehsil Indora Distt.Kangra H.P

Amount

Excavation in foundation trenches etcetra in extra work in all kind of classification of soil such as pick work,jumper work, pick jumper work, soft and hard blasting and doing work in saturated soil including chiseling or wedging out rocks where blasting is prohibited or any other mixed variety of soil including shoring, strutting, dewatering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arrise during dewatering removal of slush and stacking the reserviceable and unserviceable material clear from the edge of excavation with in all leads and lifts as directed by Engineer-in-Charge and then returning the stacked soil in 15 cm (Fifteen Centimetre) layers when required into plinths and sides of foundation etcetra consolidating each layer by ramming, and watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposal earth to be levelled and neatly dressed including carraige of material, with in all leads, lifts and other incidental charges. The rates is inclusive of octroi, royality, malkhana, toll tax,GST or any other taxes as imposed by the Government.

Providing and laying in position Cement concrete 1:5:10 ( one cement isto five sand isto ten graded stone aggregate 40mm (forty millimetres) nominal size) vibrated and mechanically mixed and curing complete excluding cost of form work in all work upto plinth level and carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (one cement isto six coarse sand) including carriage of materials with in all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level up to floor all level in cement mortar 1:6 (one cement isto six coarse sand) including carriage of materials with in all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Half brick masonry using second class common burnt clay building bricks in foundation and plinth in Cement mortar 1:4 (One cement isto four coarse sand) including carriage of materials with in all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing M.S ( Mild steel) channel frame for doors, windows and clearstorey window manufactured from M.S ( Mild steel) channel section 75x40x4mm ( Seventy five into forty into four millimeter) with M.S ( mild steel) flat 40x12mm ( forty into twelve millimeter) welded together to make one frame including fixing of necessary butt hinges 2.5 mm (Two point five millimetre) thick with position for locking arrangement and shock observer as specified and applying a priming coat of approved steel primer after pretreatment of the surface as per direction of Engineer-in-Charge and carraige of materials with in all leads and lifts. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing Factory Made ISI marked flush door shutter 35mm ( Thirty Five Millimeter) thick ( Commercial both sides) Non decorative phenolbonded termite resistant and boiling water proof , core of block board construction with frame of first class hard wood and well match commercial three ply veneer with vertical grain or cross band and face veneer on both faces of flush door ISI marked No. 2202 of century plyboards/kit ply/green ply including black enamelled M.S butt hinges with necessary screws and carriage of materials within all leads, lifts and other incidental as approved drawing design and as directed by the Engineer-in-Charge. The rate is including of octroi , Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimetre) lugs 10cm (Ten centimetre) long embadded in cement concrete block 15x10x10 cm (fifteen into ten into ten centemetres) size of cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 20mm (twenty millimetres) nominal size ) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of 5mm (five millimetre) thick glass pans of Modiguard/Saint golvin with glazing clips and special metal sash putty of approved make complete for side hung window including applying a priming coat of red lead paint as directed by Engineer-in-Charge and carraige of materials with in all leads, lifts and other incidentals.The rate is including of Royality, Malkhana,octroi, toll tax, GST or any other taxes as imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,heights of propping and centring in all heights/depths below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings,balconies and access platform, shelves and the like floor etcetera In all thickness upto all floor level including entire carriage of materials in all leads,lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights/depths below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width including entire carriage of materials in all leads,lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights/depths below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carraige of materials with in all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights/depths below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams,beam haunchings, cantilevers, girders, bressumers and lintels upto any height/depth upto all floor level including entire carriage of materials with in all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights/depths below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surface such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like upto all floor level including entire carriage of materials within all leads,lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 (M-Twenty Five) grade to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) using cement content as per approved design mix and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per approved design including pumping of concrete to site of laying including admixture in recommended proportion as per IS-9103 to accelerate retard setting of concrete, improve workability without imposing strength and durability for all work above plinth level upto all floor level as per direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing, hoisting and fixing above plinth level up to all floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with cement concrete 1:1.5:3 (One cement isto One point five coarse sand isto three graded stone aggregate) 20 mm (Twenty Millimeter) nominal size including entire carriage of materials with in all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying steel reinforcement Thermo mechanically treated bars of grade Fe-500 ( five hundred) (D) for RCC (Reinforced Cement Concrete) work including straightening, cutting, bending, binding and placing in position complete including cost of binding wires complete and carraige of materials with in all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Stone filling dry hand packed tightly under floor including watering,ramming, consolidationg and dressing complete and including carraige of materials with in all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and laying vibro hydraulically compressed and polished precast terrazo tiles of ISI marked no. IS 1237 of size 30x30 cm size (Thirty into thirty centimeter) and 22mm (Twenty two millimeters) thick with graded marble chips of specified sizes in 70% (Seventy percent)White and 30% (Thirty percent) grey cement in white, yellow, green and maroon chips of 0, B and 2B size laid in floors, treads of steps and landing on a bed of 20mm(Twenty millimeters) average thickness of cement mortar 1:4 (one cement isto four coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles. Wherever required including rubbing and polishing complete with tiles of medium shade as required upto all heights as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals, the rate is inclusive of octroi,royality,malkhana,toll tax, sale tax, G.S.T or any other texes imposed by the Government.

Providing and fixing vibro hydraulically compressed and polished precast terrazo tiles 22mm (Twenty two millimeters) thick with graded marble chips of specified sizes of ISI marked no. IS 1237 in 70% (Seventy percent)White and 30% (Thirty percent) grey cement) in white, yellow, green and maroon chips of 0, B and 2B size in skirting, risers of steps and dado upto any height on 12mm (twelve millimetres) thick in cement plaster 1:3 ( One Cement isto three Coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles. Wherever required including rubbing and polishing complete with tiles of medium shade as required upto all heights as per HPPWD specifications, approved drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals, the rate is inclusive of octroi,royality,malkhana,toll tax, sale tax, G.S.T or any other texes imposed by the Government.

Providing and laying 300x300mm(three hundred into three hundred millimeters) Antiskid ceramic tiles of AGL/BELL-ORIENT/NITCO/KAJARIA of first quality conforming to IS: 15622 of approved make, in all colours and shades in flooring, treads of steps laid on bed of 20mm (Twenty millimeters) thick cement mortar 1:4 ( One cement: four coarse sand ) and jointed with grey cement slurry including pointing the joints with white cement and matching pigment etcetra complete as required upto all heights as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals, the rate is inclusive of octroi,royality,malkhana,toll tax, sale tax, G.S.T or any other texes imposed by the Government.

Providing and laying 300x300mm(Three hundred into Three hundred millimeters) ceramic glazed floor tiles BELL-ORIENT/NITCO/KAJARIA ( thickness to be specified by manufacture) of Ist quality conforming to IS: 15622 of approved make, in all colours such as White, lvory, Grey, Fume Red brown in skirting risers of steps laid on bed of 12mm (Twelve millimeters) thick cement mortar 1:4 ( One cement: four coarse sand ) and jointed with grey cement slurry complete as required upto all heights as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals, the rate is inclusive of octroi,royality,malkhana,toll tax, sale tax, G.S.T or any other texes imposed by the Government.

15mm(fifteen milimetre) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rates is inclusive of octroi,royality,malkhana,toll tax, sale tax, G.S.T or any other texes imposed by the Government.

Providing and fixing 12 mm (Twelve millimetre) thick Unistone cladding as on face of masonry walls etcetra on 12mm(tewelve milimetre) thick cement plaster 1:3 ( one cement : three coarse sand ) jointed with cement slurry including scaffolding etcetra complete as per HPPWD specifications,approved Drawing,design,as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi,royality,malkhana toll tax, sale tax, G.S.T or any other texes imposed by the Government.

Applying priming coats over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil, grease,dirt and other foreign metter, sand papering and knotting with ready mixed pink or grey primer of approved brand and manufacture as per HPPWD specifications,approved Drawing,design , as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi,royality, malkhana toll tax, sale tax, G.S.T or any other texes texes imposed by the Government.

Painting with synthetic enamel paint of approved brand Asian paint /Nerolac ):Two or more coats on new wood and wood based surfaces of required shade to give an even shade including cleaning the surface of all dirt,dust and other foreign matter complete as per entire satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two or more coats on new steel work with synthetic enamel paint of approved brand and manufacture to give an even shade including cleaning the surface of all dirt , dust and other foreign matter complete as per entire satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with first quality acrylic distemper (ready mixed) having VOC content less than 50gms/ litre (Fifty grams per litre) of approved manufacturer of Asian/Nerolac of required colour and shade complete as per specification of approved brand and manufacturer over the plastered wall surfaces to prepare the surface even and smooth complete upto all floor level in all heights as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rate inclusive of octroi,royality,malkana,toll tax, sale tax, G.S.T or any other taxes imposed by the Government.

Wall painting (two or more coats) with synthetic/ acrylic emulsion paint of (ASAIN/NEROLAC/ICI -DULUX ) approved brand and manufacture for interior grade on undecorated wall surface to give an even shade including thoroughly brushing the surface to given an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leadss, lifts and other incidentals .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per entire satisfaction and the direction of Engineer-in-Charge, Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

6mm( Six millimetre) thick Cement plaster to ceiling with Cement mortar 1:3( One Cement isto three Sand) complete upto all floor level as per entire satisfaction and the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing plinth protection with 40 mm (Forty millimetre) thick heavy duty precast cement concrete interlocking paver block with 23 cm (twenty three centimetre) diametre half round stone ware pipe for drainage purpose laid over 10mm (Ten Millimetre) thick cement concrete 1:4:8 (one cement isto Four sand isto Eight graded crushed stone aggregate 40 mm (Forty millimetre) nominal size bedding/haunching for pipe complete as per approved drawing/design and specification and as per the direction of Engineer-in-charge including carraige of materials with in all leads, lifts and other incidentials.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred in to Sixteen milimetres) anodized aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS :1868 tranparent or dyed to required colour or shade with nuts and screws etcetra complete as per specification and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi,royalty,malkana,toll tax, sale tax, G.S.T or any other taxes imposed by the Government.

Providing and fixing 300x10mm (Three hundred in to Ten milimetres) aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS:1868 etcetra complete as per specification and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals.The rate inclusive of octroi,royalty,malkana,toll tax, sale tax, G.S.T or any other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into Ten milimetres) aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS:1868 transparent or dyed to required shade and colour with necessary screws etcetra complete as per specification and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals.The rate inclusive of octroi,royalty,malkana,toll tax, sale tax, G.S.T or any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five millimetre) anodized aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 (Ten) as per IS:1868 transparent or dyed to required shade and colour with necessary screws etcetra complete and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rate is inclusive of octroi,royalty,malkana,toll tax, sale tax, G.S.T or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) anodised aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per ISI:1868) transparent or dyed to required colour and shade with necessary screws etcetra complete as per specification and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi,royality,malkana, toll tax, G.S.T or any other taxes as imposed by the Government.

Providing and fixing M.S. ( Mild steel) fan clamp type -1 of 16 mm ( Sixteen millimetre ) diameter mild steel bar bent to shape with hooked ends in R.C.C ( Reinforcement Concrete Cement ) slab during laying including painting the exposed portion of loop,all as per standard design complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty milimetres) bright finished brass single acting spring hinges with necessary brass screws etcetra complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 110mm ( One hundred ten millimetre) PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm( Four point Five Kilogramme per square metre ) ISI marked including filling the joints with approved adhesive complete as per approved drawing, design,entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm diametre ( One hundred ten millimetre) PVC plain bend of Finolex/Vectus on wall face P.V.C accessories for rain water pipes including filling the joints with approved adhesive complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm diametre ( One hundred ten millimetre) PVC plain shoe of Finolex/Vectus on wall face P.V.C accessories for rain water pipes including filling the joints with approved adhesive complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Mild steel holder bat clamps of approved design to C.I., S.C.I or P.V.C pipes embeded in and including cement concrete blocks 10 x10x10 cm ( ten into ten into ten centimetre ) of 1:2:4: (One cement: Two sand : Four graded stone aggregate 20 mm ( Twenty millimetre ) Nominal size) mix and cost of cutting holes and making good the wall etcetra complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

(i) 110 mm ( one hundred ten millimetre) diametre

Providing and fixing 18 mm ( Eighteen Millimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj nagar plain white marble/Udaipur green marble/Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm ( Twenty Millimeter) thick base of cement mortar 1:4 ( One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete at all levels as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 25mm ( Twenty five millimetre ) thick Kota stone slab flooring laid over 20 mm (Twenty millimetre) thick base of cement mortar 1:4 (One cement :Four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete as per entire satisfaction and the direction of Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick ISI marked commercial board water proof shutter (Century ply) for cup board with 6 mm (six millimetre) thick hard wood edging all around including fixing with piano hinges with screw complete as per approved drawing,design,specification and as per the direction of Engineer-in-Charge and carraige of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing complete box of cup board/cabinet shall be made of 19 mm (ninteen millimetre) thick water proof termite resistant commerical board of ISI marked IS No. 1659 of Uni ply / green ply or its equivalent includingvertical partitions and shelves.The back side of cupboard/ Cabinet work shall have 6mm (Six millimetre)thick ply. All cut portion shall be finished with 6/12 mm (six millimetre/twelve millimetre) hard wood edging.All wood work of cup board and cabinet from outside and inside shall be finished with synthetic enamel paint of Asian/Nerolac of approved shade as per drawing,specification and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 0.60mm ( Zero point Six Zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 ( Twenty ) microns over 5 ( five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( Six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm ( Sixty centimetre) overall with 0.60mm ( Zero point Six Zero millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster ( RMP) organic coating of 20 ( Twenty ) microns over 5 ( Five) microns primer coating + back coat of polyster of 5 (five) microns over 5 ( Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( Six millimeter) diametre and prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Structural steel work of Tata/Sail bolted/welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a primingr coat of approved steel primer all complete intrusses and trussed purlin, main and cross beam, hip and jack rafters, purlins connected to common rafter and the like in building complete as per approved drawing, design, specification and as directed by Engineer in charge including carraige of materials within all leads and lifts. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing M.S.( Mild steel) BP ( Black plain) Sheet of Tata / Sail 1.66mm ( One point Six six millimeter) to 2mm ( Two millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick white face insulating board ceiling of approved quality with necessary nails etcetra complete (frame work and cover fillets to be measured and paid for separately) as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I (Galvanised iron) pipe hand rail of approved size by welding etcetera to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete as per the instruction of Engineer-in-charge . Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding cost of form work in foundation and plinth in all depths including carraige of materials with in all leads and lifts or as per the direction of the Engineer-in-charge . The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-20 (M-Twenty) grade to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) using cement content not less than 330 kg (Three hundred thirty kilogramme) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per approved design mix including pumping of concrete to site of laying including admixture in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without imposing strength and durability for all works above plinth level to all floor level as per approved drawing,design and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Squared rubble masonary coursed with hard stone of approved quality in foundation and plinth including racking out joint in cement mortar 1:6 (one cement isto six sand) in all heights/depths or as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster with cement mortar 1:4 (one cement : four sand) in single coat on rough side of brick/concrete/stone walls for interior plastering including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete upto all floor level as per HPPWD specification or and as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and filling stone/brick aggregate 40mm ( forty millimeter) in soak pit including carriage of materials within all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing cast iron cover (light duty) single seal pattern-I455x610mm (four hundred fifty five into six hundred ten millimetre) internal dimension, the total weight of cover and frame to be not less than 38 kg (Thirty eight kilogramme) weight of frame 15 kg (fifteen kilogramme) and weight of cover 23 kg (Twenty three kilogramme) including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing white viterous china pedastral type water closet (European Type W.C. Pan) with seat and lid, 10 (ten) litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) confirming to IS:7231 with all fittings and fixtures complete of hindware /cera /Jaquar of star white/ Snow White Shade including cutting and making good the walls and floors as per the direction of Engineer-in-Charge and carraige of materials with in all leads,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing vitreous China wash basin flat back size 630x450 mm (Six hundred thirty into four hundred fifty millimetre) with single hole for 15mm (fifteen millimetre) chromium plated brass pillar tap, 32mm (Thirty two millimetre) chromium plated brass waste of standard pattern and bracket includingpainting of fittings and brackets, cutting and making good the walls as per the direction of Engineer in charge including carraige of materials with in all leads,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 600mmX450mm (six hundred into four hundred fifty millimetre) bevelled edge mirror of superior glass of Modiguard/Saint Gobain silver foils mounted on 6mm (six millimetres) thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( Six hundred millimeter) long towel rail with total length of 645 mm ( Six hundred forty five millimeter), width 78 mm (Seventy eight millimeter) and effective height of 88 mm ( Eighty Eight millimeter) weighing not less than 190 ( One hundred Ninety) gms as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 600mm ×120mmx5mm (six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P brass bracket and guard rail complete fixed with 40 mm (fourty millimetre) long screws, rawl plugs etcetra complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing CP brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screw complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) nominal bore brass bib cock of approved quality complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) nominal bore chromium plated brass stop cock complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) diameter C.P brass pillar tap with capstan head complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimeter) nominal bore galvanised mild steel tube (medium grade) tube fitting of approved brand and manufacture (Tata/Jindal make) from source to site of building complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 1000 liters (one thousand) liters capacity PVC water storage tank (Sintex made 4 layer) of ISI-12701 marked GI inlet and outlet connections, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore brass full way valve with wheel of Jindal /Tata make complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and laying (to level or slope)150mm ( One hundred Fifty millimetre) diameter P.V.C pipe of finolex/Relpipe (Relianced/ Vectus class "A" and jointing with approved adhesive complete including testing of pipes and joints as per specification or as directed of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing P.V.C soil, waste and ventilating pipe of Finolex/Relpipe (Reliance) / Vectus confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm (ten millimetre) gap for thermal enpassion as per specification and as directed by Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

(a) 75mm ( Seventy five millimeter) diameter

(b) 110mm ( One hundred Ten millimeter) diameter

Providing and fixing M.S.( Mild Steel) holder-bat clamps of approved design to Sand Cast iron/cast iron/P.V.C pipe embedded in and including cement concrete blocks 10x10x10 cm ( Ten into ten into ten Centtimeter) of 1:2:4 (One cement isto two coarse sand isto four graded stone aggregate 20mm(Twenty Millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per specification or as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

(a) 75mm ( Seventy five millimeter)diameter

(b) 110mm ( One hundred ten millimeter)diameter

Providing and fixing P.V.C Plain bend for P.V.C pipe grade A of Finolex/Vectus of approved quality including fixing with approved adhesive complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

(a) 75mm ( Seventy five millimeter) diameter

(b) 110mm ( One hundred Ten millimeter) diameter

Providing and fixing ISI markedPVC double equal branch with oval access door insertion rubber, washer, 3mm (three millimetre) thick bolts and nuts completeincluding fixing with approved adhesive etcetra complete as per the direction of Engineer-in-Charge and carraige of materials with in all leads,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

(a) 110mm ( One hundred Ten millimeter) diameter

(b) 75mm ( Seventy five millimeter) diameter

Providing and fixing PVC Collar for P.V.C pipe grade 'A' of Finolex/Vectus of approved quality including fixing with approved adhesive as per the direction of Engineer-in-Charge and carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

(a) 75mm ( Seventy five millimeter) diameter

(b) 110mm ( One hundred ten millimeter) diameter

Providing and fixing 110X90 mm (one hundred ten into Ninety millimetre) PVC floor trap of Finolex/Vectus of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors etcetra complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Constructing masonry Chamber 60x60x75 cm ( Sixty into Sixty into Seventy five centtimeter) inside, in brick work in cement mortar 1:4 (One cement isto four coarse sand) for sluice valve, with C.I. surface box 100mm( One hundred millimeter) top diameter, 160 mm ( One hundred Sixty millimeter) bottom diameter and 180 mm ( One hundred Eighty Millimeter) deep ( inside) with chained lid and RCC top slab 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20mm(Twenty Millimeter) nominal size ) mix including necessary excavation, foundation concrete 1:5:10 (One cement isto five sand isto ten graded stone aggregate) 40 mm ( forty millimeter) nominal size) and inside plastering with cement mortar 1:3 (One cement isto Three coarse sand) 12 mm ( Twelve Millimeter) thick, finished with a floating coat of neat cement complete as per standard design : With second class common burnt clay building bricks including carriage of materials within all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement: Ten graded/crushed stone aggregate) 40 mm (Forty millimetre)nominal size) bedding for P.V.C pipe of 150 mm (One hundred fifty millimetre) internal diameter including necessary form work as per specification or as directed by Engineer-in-Charge and carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of classification of soil such as pick work, jumper work,blasting work,pick jumper blasting work, soft and hard blasting including chieseling or wedging out rock where blasting is prohibbited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arrise out during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per the direction of Engineer-in-Charge including carraige of materials with in all leads and lifts.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore galvanized mild steel tubes (Medium Grade) tube fitting and clamps including making good the wall,ceiling and floor Tata/Zindal make as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink 610X510 mm (six hundred ten into five hundred ten millimetres) with bowl depth 200 mm (Two hundred millimetres) of approved make as per IS:13983 C.I brackets and stainless steel plug 40mm (Forty millimetre) including painting of fitting and brackets, cutting holes and making good the walls as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing Hind ware/Cera make orrisa pattern viterous china water closet squatting pen (Indian Type W.C. pan size 580 mm (Five hundred eighty millimetre) (Earth Work, bed concrete foot rest and trap to be measured and paid for separately as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 10 (ten) liters net capacity PTMT coloured/white automatic flushing cistern with a pair of PVC/CI or MS brackets complete with fitting including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connection with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for seprately) as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 100mm (hundred millimetre) size sand cast iron P or S trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement isto one sand) as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Constructing manhole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate) 20mm (twenty millimetre) nominal size) mix, foundation concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm(forty millimetre) nominal size)in side plastering 15mm (fifteen millimetre) thick with cement mortor 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channeles in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing having inside size 800mmx800mm (eight hundred millimetres into eight hundred millimetres) and upto any depth including C.I. cover with frame (light duty single seal pattern one) 455mmx610mm (four hundred fifty five millimetre into six hundred ten millimetre ) internal dimension total weight of cover and frame to be not less than 38kg (thirty eight kilogram) weight of cover 23kg(twenty three kilomgram) and weight of frame 15kg(fifteen kilogram) with 200mm (two hundred milllimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement isto three sand) as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimetre) diameter PVC waste pipes for wash basin or sink of hindware /cera /Jaquar as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing PVC connections pipe with brass unions 45cm (forty five centimetre) length 15mm (fifteen millimetre) nominal bore of Cera/Jaguar or hindware Make as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked 100mm (One hundred millimetre) sand cast iron grating for gully floor or Nahni trap complete including carraige of materials with in all leads, lifts and other incidental charges. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre) ISI marked P.V.C cowl of Finolex/Vectus make as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 200mm (two hundred millimetres) wide cast iron rungs with chequered or ribbed non slip surafce including fixing in manholes with 200X200X100 mm (two hundred into two hundred into one hundred millimetres) cement conrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20 (twenty millimetre) nominal size) and curing complete as per the direction of Engineer-in-Charge including carraige of materials with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govermnent.