Repairs to Cabin/Body of Deptt. Truck No. 8136/ JK05A of Work Shop Sub Div Baramulla.

Amount

Complete dismantling of existing cabin by way of properly removing dismantling the damaged parts which include damaged/bent M.S angle, wooden planks, sunmica, GI sheets etc. Removing of all allied items associated with cabin and items which are in good condition duely taken care of without inflicting any damage. The usage of standard tools & tackles are to be provided by the firm and shall be responsible for custody & care of all items till the refitting of the same. Damages (if any) occur to any item(not the part of the work) during execution of the job shall be the responsibility of the firm.

Fabrication of new cabin frame and body repairs by way of providing and fitting of below mentioned items. The contractor should ensure execution by skilled man-power with proper tools & tackles and consumables along with to and fro transportation etc, from its end.(excluding labour) The dimensions & design of frame should match to the existing cabin in all respects.

ISA 50X50X6mm

ISA 40X40X6mm

ISA 25X25X3mm

MS Channel 4"x2"

M.S Sheet 4X8X5mm

CR Sheet 1200x2400x1.25mm

Fixing of wooden planks of below mentioned size in to the frame and body.(Excluding labour)

Silver wood of size 1.5"x12"x8'=5No 1"x10"x8'=13No 2"X10"X8'=8No 2"x1"x14'=14No.

Kikar wood of size 2.5"x2.5"x7'=4No 1.5"x8"x8'=8No 0.75"x6"x7'=15No

Fixing of Ply wood & Sunmica of required size in to the cabin out of below mentioned sheets. (Excluding labour)

Ply wood 4'x8'4mm

Ply wood 4'x8'x12mm(ply to ply)

Ply wood 4'x8'x19mm (ply to ply)

Sunmica 4'x8'

Fixing of other allied items mentioned below for finishing of the cabin.(Excluding labour)

Aluminium chequered sheet(900X2400)26 gauge

Steel hings 3"

MS Rivet 12x8mm

V-Channel glass

PVC Channel for window glass 2.5"

Rubber 1"

Rubber 3/4"

Glass stopper

Nails of sorts

Expanded mesh steel

Nuts & bolts of sorts

Tower bolt 150mm

Tower bolt 100mm

Tower bolt 75mm

Steel hings 4"

Door lock

wood screw 1",1/4"

Steel screw 3/4", 1/4"

Aluminium angle 25x25mm(12')

Aluminium angle 20x20mm(12')

Pernal channel 12'

Aluminium Strip 2"(12')

Fabrication of seats out of below mentioned items.(Excluding labour)

Velveth cloth

Foam cloth

U-foam 6x3x4"

U-Fooam 6x3x2"

Labour charges on account of Fabrication of Cabinand other repairs to body side.

Providing and fitting of front wind shield (Triplex) of size with rubber lining complete.

Providing and fitting of right side door glass and 02 No. side mirrors duly fitted with new rubber beading and adhesive.

Dalla repairs by way of denting, patching, welding at damaged spots and fitment of hooks.

Bonnet repairs by way of denting, patching and gas welding at damaged spots.

M/S NEW B T ENTERPRISES

M/S MEHRAJ AUTOMOBILES