Construction of ornamental walling with landscaping,installation of Gazebos-12 seater (3 no.), Reapair of ceilings of various buildings and closure of bird entries at GDC Pulwama.

Walling

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge (1:3:6 mix )

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of dry stone soling hand packed tightly incl. all carriages complete upto site of work.

Providing and laying in position Cement Concrete of Specified Grade Excluding the cost of centering , Shuttering All work upto Plinth level 1:4:8 ( 1 Cement: 4 Coarse Sand: 8 Graded Stone Aggregate 40mm Nominal Size) Crushed

Providing and laying in Reinforced cement concrete of specified grade including curing but excluding the cost of reinforecement & centring and shuttering. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size(reinforced)

Providing and laying in position Cement Concrete of Specified Grade Excluding the cost of centering , Shuttering All work upto Plinth level 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20mm Nominal Size) Crushed

Centring and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached plasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc and removal of form work for Foundation, footings, basis of columns etc for mass concrete includig all leads, lifts and carriage of material all complete.

Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

supply and filling of good earth,incl ramming, wattering and carriage up to site all complete

Providing and fixing of devri stone tile cladding laid over 20mm thick avg base of cement mortar 1:4 mix and jointed with grey cement slurry incl. all carriages complete.all as per directions of EIC.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) incl applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new steel work

Carriage of different materials from different source to site of work

Stone Agg and sand Pulwama for an avg. lead of 10 Kms

Gazeebo

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Description 50 meter beyond 1 m from cutting edge

Providing and laying of dry stone soling hand packed tightly incl. all carriages complete upto site of work.

Providing and laying in position Cement Concrete of Specified Grade Excluding the cost of centering , Shuttering All work upto Plinth level 1:4:8 ( 1 Cement: 4 Coarse Sand: 8 Graded Stone Aggregate 40mm Nominal Size) Crushed

Providing and laying in Reinforced cement concrete of specified grade including curing but excluding the cost of reinforecement & centring and shuttering. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size

Providing and laying in position Cement Concrete of Specified Grade Excluding the cost of centering , Shuttering All work upto Plinth level 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20mm Nominal Size) Crushed

Centering and shuttering including strutting, propping etc and removal of form work for Foundation, footings, basis of columns etc for mass concrete includig all leads, lifts and carriage of material all complete.

Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Structural steel work welded in built up sections, trusses and frammed work including cutting, hoisting welding and fixing in position complete incl. primer coat

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

P/F of colour coated 0.50mm thick 600mm wide ridges/valles.

P/F of Deodar woood ornamental type eves boarding 300x40mm 2nd class Deodar Wood

P/F of imported wood pannelling including all necessary jamming, fixing , fixtures polishing carriage complete job incl 12mm ply base incld sprit polish complete.

supply and filling of Nallah muck in plinth incl, ramming, wattering and carriage up to site all complete

Providing and fixing of devri stone tile cladding laid over 20mm thick avg base of cement mortar 1:4 mix and jointed with grey cement slurry incl. all carriages complete.all as per directions of EIC.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new steel work

Carriage of different materials from different source to site of work

Stone Agg and sand for an avg. lead of 10 Kms

Ceiling Repair

Providing wood work in frames of ceiling, partitions etc. sawn and fixed inposition :Budloo / Fir wood

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 2nd class kail wood

Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) :

Painting with synthetic enamel paint of approved brand and manufacture of approved brand and manufacture on wood work etc. including cost and carriage of all materials equipments complete job

Providing and applying With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and fixing of cgi sheets for gables, soffits etc including nails, carriage complete job 0.5mm thick

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing bolts including nuts and washers complete.

Engagement of labors for dismanling old ceiling, removal of unhigenic material including disposal disposal of unserviceable material as per directions of EIC.