Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | RAJAN G L1 | JAYADAS R L2 | REJITH R C L3 |
|---|---|---|---|---|---|---|
| 1.00LIBRARY BUILDING MAITENANCE | ||||||
| 1.00 | 6.3.2:Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks | 2.07 | cum | 8,214.3 ₹17,003.6 Lowest | 8,304.47 ₹17,190.25 | 8,815.35 ₹18,247.77 |
| 1.00 | 13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | 164.27 | sqm | 322.94 ₹53,049.35 Lowest | 326.49 ₹53,632.51 | 346.57 ₹56,931.05 |
| 1.00 | 13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster | 10.14 | sqm | 406.31 ₹4,119.98 Lowest | 410.77 ₹4,165.21 | 436.04 ₹4,421.45 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 630 | kg | 193.56 ₹1,21,942.8 Lowest | 195.69 ₹1,23,284.7 | 207.73 ₹1,30,869.9 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 52.85 | sqm | 705.9 ₹37,308.93 Lowest | 713.65 ₹37,718.54 | 757.55 ₹40,038.79 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 16.5 | metre | 473.63 ₹7,814.9 Lowest | 478.83 ₹7,900.7 | 508.28 ₹8,386.62 |
| 1.01 | OD107159/2025-2026: Supplying and fixing trapezoidal PVC Rain Water Gutter Pipe including fitting with 32x5 mm MS Flat as supports at 1 m interval etc complete | 23 | metre | 498.79 ₹11,472.17 Lowest | 504.27 ₹11,598.21 | 535.29 ₹12,311.67 |
| 1.01 | 50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | 12 | metre | 206.59 ₹2,479.08 Lowest | 208.87 ₹2,506.44 | 221.71 ₹2,660.52 |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 12.6 | kg | 490.12 ₹6,175.51 Lowest | 495.5 ₹6,243.3 | 525.98 ₹6,627.35 |
Tender Value
₹4.2 L
EMD Value
₹10,589
Closing Date
5 Aug 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer Thiruvananthapuram District Panchayath
Building
2025_LSGD_778943_24
10/HD/AEE/LSGD/TVM/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thiruvananthapuram
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,589
Yes
19 Oct 2025
26 Jul 2025
7 Aug 2025
26 Jul 2025
5 Aug 2025
26 Jul 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1276019.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .