REPAIR REPLACEMENT OF FLOOR JOINERY WALL TILES SANITARY WATER SUPPLY FITTING SUNKEN PORTION OF TOILET AND BATHROOM AND ALLIED WORKS IN ZONE X UNDER THE AREA OF AGE BR-I AT GE WEST BAREILLY

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

Brick work with fly ash bricks, straight or curved on plan 6m mean radious built in CM (1:6) etc as directed .

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

Demolition of cement concrete (un-reinforced) including terrazo of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

Taking down shutter of any description n/exc 1 sqm each incl removing from the premises complete all as spd and directed

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed

M&L for 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints and any numbers of rebate all as spd and directed

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification and drawing all as spd and directed

S & F factory made solid pannel PVC door shutter 30mm thick style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm wide struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawingshown in SSR Pt -ll (rate ) - 2010.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilators divided into squares with plain chamfered mitred & rebated sash bars edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.24 (b) all as spd and directed

S&F factory made 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made 25mm thick flush shutter solid core construction with block board core and plywood face panels ,cupboards ,shelves , drawers , pelmet boxes etc all as spd and directed.

S&F Factory made steel window /ventilator side hung shutters including box type hinges with Z section steel handle, 2 Nos 100mm MS tower bolt on each shutter and MS CP hook and eye stay, complete with glazing bars dovetailed or welded all as spd and directed.

Ditto as above but with out glazing bar and complete all as spd and directed .

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.

S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

S&F 14 to 16 mm th green marble stone slabs machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade fixed as in steps jams ,pillars ,window,cupboards selfs, cills cooking platforms & the like etc all as specified and directed by Engr-in-Charge

S&F PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS Screws through the grrove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A strip of 5mm thick PVC sheet of width 75mm featherd at edges shall be stuck at the places where two panels are joined, using solvent cement Complete as per direction of Engr-in-Charge.( Note: Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as spd and directed

S&f in repair floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, 140mm long complete all as spd and directed.

S&F in repairs cast iron body door closer hydrocally regulated designation No. 1 universal type for door shutters up to 700 mm in width and of weight not more than 35Kg and fixed all as spd and directed

S&F in repairs 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description and applying two coat of synthetic enamel paintover one coat of pink primer complete all as spd and directed by Engr-in-Charge

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

S & F GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

S & F in repairs GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 25 mm dia MS fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F for 100mm long stainless steel butt hinges for PVC door.

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F fancy Bib tap 15mm dia cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed in repairs

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S & F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats.

S & F CP single towel rail 60 cm long incl fittings complete all as specified and directed Make : Jaquar cat noAKP- 35711Por equivalent.

S & F CP towel ring square Cat No AKP-35721P of Jaguar or equivalent complete all as specified and directed.

S & F 450 mm long braided hoses with nut & rubber washer suitable for basin mixers Make Jaquar cat no 8038.

S & F CP towel rack size 24" Cat No 7781B of Jaquar or equivalent complete all as specified and directed.

S & F soap dish holder Cat No AQN_7731 of Jaquar or equivalent complete all as specified and directed.

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

Demolition/Dismantling of breaking up drain pipes( AC or reinforced concrete )set in cement mortar for 100mm internal dia (and less) of pipes.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & floor ,jointed with solvent cement.

All as above but 75mm dia pipe

S & F sand cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified

M & L 75 mm dia cost Iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) as in repairs

S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc.all as specified including black japan paints Make neco

S&F 75 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F CI 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

S&F 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

Demolition of cement concrete(unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.)

Supply only liquid waterproofing compound all as specified. Make : Dr. Fixit

M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete

M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles.

M&L for RCC using 20mm graded mechanically crushed stone aggregate as in RCC shelves roof proj/drops/chajjas etc all as spd.

M&L for form work as in rough finished surfaces of soffits and of shelves, chajjas n.exc 20cm thick all as spd.

M&L for 8mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as spd.

All as per item No. 91 but 10mm dia and over.

Taking down cement plaster from wall / ceiling of any description including terrazzo skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) including finishing the surface even and smooth without using extra cement all as spd and directed

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) including finishing the surface even and smooth without using extra cement all as spd and directed

M & L for rendering 10 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished the surface even and smooth without using extra cement complete all as spd and directed

M&L white washing three coats to wall surfaces including preparation of newly plastered untreated surfaces all as spd and directed

Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces

M&L for applying 1 mm thick layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

M & L applying two coat of distemper oil emulsion white or tinted on new decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying one coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles complete all as specified and directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqm (400 x 400mm) but not exceeding 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as above but as in vertical surfaces

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

All as above but as in vertical surfaces

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection ,path,finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole etc all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 15mm thick in CM (1:6) for laying floor finishes complete all as specified and directed

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 300x300mm, 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishing sufaces even and smooth without using extra cement complete all as specified and directed

S&F glass dividing strips, 3 mm thick 38 mm with inserted in position to confirm to design.

S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

S & F stainless steel plate rack not less than 5 Kg of size in repair complete all as specified and as dirrected (Model : KPR -315 of M/S Blue Star or equivalent make- of M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna)

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair or as specified or as directed.

S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls.

Cutting holes into bricks walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required, depth of hold fast exceeding half brick and not exceeding one brick all as spd and directed

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if required, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

M&L for 4mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.

M&L for applying two coats of Dr Fixit Raincoat white over a coat of primer on walls and chajjas etc including filling up all cracks holes with cement mortar 1:3 before the treatment, complete all as specified and directed.

Notes:-

novell engineers

SHRI BALA JI STORE

Goel Enterprises

RIYASAT ALI KHAN

hardeep singh enterprises

REHAN CONSTRUCTION

M/S Harshri Nath Enterprises