PROVN OF GUARD ROOM WITH SENTRY POST WITH ALLIED INFRA 1X GARBAGE PIT NEAR BLDG NO T-68 COOK HOUSE FOR INF BN AND UNDERGROUND GARBAGE PIT NEAR COOK HOUSE FOR INF BN AT URI AND SPL REPAIR TO BLDG NO TNC-249 OR LIVING ACCN OF AGE B/R-III AND BLD

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil.

Removing excavated material (soil) exc 250 M but n.exc 500 M and depositing where directed complete all as specified and as directed.

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn,shafts,pier hole n. exc. 10 Sqm on plan and getting out soft/loose soil,complete all as specified and as directed.

PCC 1:4:8 type D-1 using (20mm graded crushed aggregate) as in sub base and in foundation concrete complete all as specified and as directed.

Returning filling , including, spreading, levelling and well ramming in layers n.exc 25cm complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Earth filling under floors , including, spreading, levelling, well ramming and watering in layers n.exc 25cm complete all as specified and as directed.

M & L brickwork with subclass `B` straight or curved on plan n.exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

Formwork to sides of footing, plinth band, lintel band etc complete all as specified and as directed.

Formwork to sides of columns complete all as specified and as directed.

M & L formwork to edges of concrete flats, treads, floor and roofs n.exc 20cm wide complete all as specified and as directed.

M&L formwork to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified and as directed.

M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in footing, plinth band complete all as specified and as directed.

M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in , columns complete all as specified and as directed.

M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in , beams & lintels complete all as specified and as directed.

M & L Reinforcement cement concrete Type M-25 (20mm graded crushed stone aggregate) as in slabs, chajjas supported on walls, complete all as specified and as directed.

S&F framed work such as grills gratings etc with end of bars shoulderd and or riveted or forged in to spikes framed guard bars, barred iron doors etc and similar work concorming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F in steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 20mm bore complete all as specified and as directed.

S&F pillar tap cast copper ally with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe pipe and fixed owith 15mm bore in repairs complete all as specified and as directed.

Vitreous China squatting pan,Orissa Pattern size 580x440 mm white with integral foot rests exccludidng flushing cistern flush pipe including connection to trap,anti syphonate pipe etc complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 in repairs complete all as specified and as directed.

S&F in Rotational moulded polyethylene water storage tanks (cylindrical) vertical with closed top ) hoisted and fixed in poisition all as specified in SSR Part I of 500 ltrs complete all as specified and as directed.

Vitreous china ware wash hand basin white flat back size 550x400mm size including brackets and PVC pipe check nut complete fixing accessories complete all as specified and as directed.

PVC low level Flushing cistern of capacity 10 liters capacity fixed in repairs complete with all fittings complete all as specified and as directed.

PVC floor traps plain with gratings including jointing to waste pipe with solvent cement dia of out let 75mmcomplete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 Using 12.5 mm (graded stone crushed aggregate) for benching,coping etc. complete all as specified and as directed.

S&F Gun metal globe or gate valves with iron wheel head ,screwed both ends for irion pipe and fixed to 15mm bore complete all as specified and as directed.

S&F Gun metal globe or gate valves with iron wheel head ,screwed both ends for irion pipe and fixed to 20mm bore in repairs complete all as specified and as directed.

S&F angle valves cast copper alloy screwed down high pressure of fanciy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs complete all as specified and as directed.

S&F bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement concrete surface for fixing of reinforcement in position all as specified.

All as per item No 34 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Supply only liquid water proofing compound.

S&F , rolled mild steel of grade Fe -410-W(Grade E-250), quality "A" in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee,a ngle, channel or flat sections) including distance pieces,cleats etc.complete all as specified and as directed.

M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited, spread, levelled in layers n.exc.15cm thickness, watered and rammed to a true surface complete all as specified and as directed.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc complete all as specified and as directed.

M&L 4mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on wall complete all as specified and as directed.

M&L 4mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and as directed.

S&F 35 mm thick ,plain, framed, pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and as directed.

S&F 30mm thick 2nd class soft wood glazed & skeleton door shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as specified in SSR Part-II section 8 clause 8.23(b)

S&F 2nd class hard wood plain soild,straight chowkats and frame wrought,framed rebated on solid,rounded or chamfered,put together with pinned at joints complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all as specified and as directed.

All as per Ser item No 46 above but except timber complete all as specified and directed. (Note : Serviceable timber obtained from ser item No 42 above to be used).

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work complete all as specified.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails .

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and as directed.

All as per Ser item No 52 above but except boarding complete all as specified and directed. (Note : Serviceable boarding obtained from ser item No 51 here-in-before to be used).

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm Each complete all as specified and as directed.

S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints complete all as specified and directed.

S&F 35 mm thick, 2nd class hardwood, plain, framed, pannelled shutters (any number of pannel) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood glazed & skeleton shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b) complete all as specified and as directed.

S&F 30mm thick 2nd class hard wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b)

S&F 100mm size MS butt hinges medium weight cold rolled complete all as specified and directed.

S&F 75mm size MS butt hinges medium weight cold rolled complete all as specified and directed.

S&F 150mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm length aluminium anodised handle cast type complete all as specified and as directed.

S&F 75mm length aluminium anodised handle cast type complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and as directed.

S&F 300mm ordinary rat tail rod pattern springs including rooler and roller plate of mild steel complete all as specified and as directed.

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 Sqm in Each pane complete all as specified and as directed.

S&F, Galvanised mild steel wire cloth 0.56 nominal dia of wire and width of aperture 1.18mm complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or glavanised wire staples complete all as specified.

M&L for demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level) and removal from site complete all as specified and as directed.

M&L 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring complete all as specified.

M&L for 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of floors and pavings, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 40mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.

M&L Hard core of broken stone or boulder of gauge exceeding 63mm but not exc 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement , complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc complete all as specified and as directed.

S&F Glazed coloured ceremic tiles 350x300x7mm/450x350x7mm thick , in dado / skerting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Coloured glazed ceramic tiles in vertical surface 350x250x7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick mortar bed in CM 1:4 complete all as specified and as directed.

S&F coloured non skid ceremic tiles 300x300x7 thick , in flors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of Each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre Each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:4) including rubbing, cutting and polishing (mirror type), complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match dark shade tiles. all as specified including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Mat Finish(Non-Skid) coloured tiles straight edge, standard economic class-II a grade of size of Each tile exc 0.18 Sqm but n exc 0.36 Sqm , thickness not less than 6mm as in floor etc set joined in neat cement slurry and poined with coloured cement laid over and incl 15mm thick bedding layer in CM 1:6 complete all as specified and as directed.

M&L Chequred coloured tile size 250x250x22 mm with grey cement and pigment using table vibrator or equivlent as in jointed and pointed in neat cement slurry over and included 15 mm screed cement mortar (1:6) and pigment size conforming complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortar 1:4 , 20 mm thick for laying floor finishes complete all as specified and as directed.

M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 for backing of Dado/ Skerting complete all as specified and as directed.

Rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work/walling or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in CM 1 :6 finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

M&L in repair for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.

S &F Expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n.exc 4kg per Sqm complete all as specified and as directed.

Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and as directed.

Mild steel (MS Angle Iron) as in posts and struts in fencing including cutting tops shape as directed welding, drillied notching for wire etc including all necessary drilling etc. and similar work conforming . Unit rate is also included for locking holes after fixing of barbed wire and welding to bent portion complete all as specified and as directed.

S & F plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without anyattachment and fixing complete AFe-290 (Gde E-165) complete all as specified and as directed.

S&F mild steel plates wind ties for roof incl securing bolts and work confiring to Fe-290 Gde E-165 complete all as specified and as directed.

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched complete all as specified and as directed.

S & F for tubular curtain rails 20mm dia of aluminium anodised complete all as specified and as directed.

S&F for Aluminium anodised Brackets fixed in repair for item 102 complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed.

M&L for preparation of new plastered surface and applying Two coat of distemper complete all as specified and as directed.

Preparation surfaces, plastered or unplastered new surfaces on wall and applying two coats of cement base paint Including one coat of alkali resistant complete all as specified and as directed.

Preparation surfaces, plastered or unplastered old surfaces on wall and applying two coats of cement base paint complete all as specified and as directed.

Preparation of old painted surfaces of any descriptoin, not otherwise described, over 10cm witdth or girth and applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.

Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a)One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on same board with accessories

(c) One 3 pin 5 Amp switch socket outlet on independent board

S&F switch piano Flush type, single pole, one way 5 amp 240 volts,complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1,3 pin,5 Amps flush type,universal complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed.

S & F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

Supply and fixing LED Bulb 12 Watt complete all as specified.

S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 bends. M.S. hook and stay or guy including taking down complete all as specified and as directed.

S & F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and as directed.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified and as directed.

Supply and fix in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 Sqmm and one run of 2.5 Sqmm cable and one run of casing capping shall be measured as one RM

Repair and re-fixing, re-assembling the existing cealing fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan, write MES no on fan blades including nut, bolts and washers complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed and tested on completion. Note : The rate is ilnclusive of necessary earth work as Excavation, RF and removal etc.

Note:- Schedule of credit Rs.85,259.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S ANUSHA ENTERPRISES

M/s GHULAM HASSAN MALIK

M/S BHAT AND CO