Conservation and Beautification of Vadape lake Tal Bhiwandi Dist.Thane

Cleaning Work Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Dewatering the excavated trenches and pools of water in the building trenches/ pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.(Bd-A-9/261)

Lake edge protection (Gabion wall), backfilling around the lake Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimmimg to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications as directed

Excavation for deep trenches for laying rising main in Hard murum, soft bhisa, Hard man and boulder including trimmimg to correct line & level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications

Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed.

Providing and laying in situ cement concrete of grade M-25 of trap / granite / quartzite / gneiss / graded metal for R.C.C. works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete as directed.

Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching / cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching etc. complete.

Providing & fixing G.I. wire Gabions coated with Zinc+PVC of required size, section including boxes made of mechanically woven hexagonal shaped wire mesh of type, 10x12cm. edges mechanically selvedged made of heavily (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire 3.00mm Ø edge wire 3.9mm Ø and filled with 20 to 50 kilogram weight trap stones including conveying with all the leads & lifts and placing at required places in required line, level, slope as per drawing, section as directed etc. complete under tidal conditions

Providing and laying in situ cement concrete of grade M-20 of trap / granite / quartzite / gneiss / graded metal for R.C.C. works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed.

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, Hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. Layers including watering and compacting etc. complete.

Basic Test of Cement Standard Consistancy Finess, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness

Basic Test of Aggregate Water Absorption, Specific Gravity, Impact Value, Crushing Value.

Fine Aggregate-Silt Factor

Steel Bar Testing- Upto 16 mm (set of 3 Bars)

Concrete Compressive strength of C.C. Cube ( set of 3 Cubes)

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Stone pitching / Bund strengthening Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, machinery, hand packing / wedging stone chips, finishing etc. complete with lead upto 1 km & all lifts as directed.

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Silt Trap (2 Units) Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimmimg to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications as directed

Excavation for deep trenches for laying rising main in Hard murum, soft bhisa, Hard man and boulder including trimmimg to correct line & level and to specified width, including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications

Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / quartzite / gneiss / graded metal for foundation and bedding with Batching Plant and Transit mixer including placing, compacting, curing etc. complete with all lifts as directed.

Providing and laying in situ cement concrete of grade M-30 for trough of aqueduct etc. of trap / granite / quartzite / gneiss / graded metal with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, Hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. Layers including watering and compacting etc. complete

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Basic Test of Cement Standard Consistancy Finess, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness.

Basic Test of Aggregate Water Absorption, Specific Gravity, Impact Value, Crushing Value.

Fine Aggregate-silt Factor

Steel Bar Testing- Upto 16 mm (set of 3 Bars)

Concrete Compressive strength of C.C. Cube ( set of 3 Cubes)

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Construction of Toilet Block Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimmimg to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications as directed

Excavation for deep trenches for laying rising main in Hard murum, soft bhisa, Hard man and boulder including trimmimg to correct line & level and to specified width, including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications

Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed.

Providing and laying in situ cement concrete of grade M-10 of trap / granite / quartzite / gneiss / graded metal for foundation and bedding with Batching Plant and Transit mixer including placing, compacting, curing etc. complete with all lifts as directed.

Providing and laying in situ cement concrete of grade M-20 of trap / granite / quartzite / gneiss / graded metal for R.C.C. works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed.

Providing and laying in situ cement concrete of grade M-20 of trap / granite / quartzite / gneiss / graded metal for R.C.C. works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed.

Providing and laying in situ cement concrete of grade M-20 of trap / granite / quartzite / gneiss / graded metal for R.C.C. works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed.

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, Hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete

Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. Per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer Charge)

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with water proofing compound filling up to half depth of brick bat, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing Compound. Making finished surface with false squares of 300mm X 300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs.500/- including ponding test etc. complete

Providing water proofing bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cemnt including leveling, curing and covering 10 years guarantee on Court fee stamp paper of Rs.500/- including ponding test etc. complete

Providing and laying Antikid Ceramic tiles of approved quality of size 30 cm X 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and laying ceramic tiles having size 30 cm X 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing etc. complete

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. on C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing frame with / without ventilator of size as specified with Courty cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 mm X 40 mm X 5 mm with oil painting, etc. complete

Providing and fixing ISI marked double swing flush door shutters confirming to IS:2002 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters. 30 mm thick including ISI marked tainless Steel L hinges with necessary screws Fittings and Fixtures per leaf SS kick plates on both sides of the door of 300 m height Heavy Duty satin finish butt SS hinges (100mm X 75mm X 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 One number 100mm X 100mm safety glass at the specified location

Providing and fixing of factory made uPVC casement window / Fixed window & Casement Door (White colour) comprising uPVC multi-chambered frame, Sash & Mullion with wall thickness of 2.3 mm (+-0.2 mm), duly reinforced with G.I section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.NO. Name of the test Test Method Specified Parameter 1. Tensile Impact Strength ISO 8256 – more than 700j/m2 2. Vicat Softening Temperature EN ISO- 306 Shall not be < 750C 3. Charpy Impact Strength EN ISO- 179-2 Shall not be < 20KJ/m2 4.Flexural Modulus Elasticity EN ISO- 178 Shall not be < 2000 N/mm2 5. Mean Breaking Stress for welded corner(a) For the tensile bending test EN- 514 Shall not be < 30 N/mm2 6. Heat Reversion Test IS:4985-2000 Shall not be >2.0% 7. Surface Spread of flame BS : 476- Part 7 Classification 1 8.Ignitability Evaluation BS : 476- Part 5 ‘P’ not easily ignitable 9. Tensile modulus ASTM D 638 Shall not be < 35 MPa 10. Shear Modulus ASTM D 732 Shall not be < 220 MPa 11. Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash and mullion, wherever necessary. Thereafter, 5 mm float Annealed glass shall be provided in the sash with the help of Upvc Glazing bead and hardware, i.e., friction hinge and single point handle (in window) and 3D hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8 mm dia. Fasteners and complete in all respect as per direction of Engineer-in-charge. uPVC window and door profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. Casement Door (Big Series ) frame of size 67 x 62 mm & Door Sash of size 67 x 115 mm & Mullion ( if required ) of size 67 x 78 mm

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 mm X 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remarking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and tacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on wall / ceiling / floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. Is necessary before use)

Providing, laying and fixing P.V.C pipe of 40 mm dia. With fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C pipe of 75 mm dia. With fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C pipe of 110 mm dia. With fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C Cover medium duty 140 Kilogram with frame etc complete.

Providing and fixing of C.P. BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete.

Providing and fixing of C.P. Angular stop clock with wall flange of approved make continental including necessary sockets / union nut etc. complete.

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outsideface of the wall, having Telephonic Black / colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. complete as directed by Engineer in charge.

Providing and fixing Orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the out side face of wall including 100 mm. dia. C.I. plug, bend, 15 mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete.

Providing C.P.Towel rail 24” jaquar make continental (Cat. No. ACN 1111N)

Providing C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N)

Providing C.P.soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733)

Providing and fixing 450 mm X 550 mm size superior type Belgium mirror with 16 mm dia. Nickel plated towel rod etc. complete.

Carpenter I Class Skilled

Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. As directed by Engineer in charge.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection up to the outside face of the wall

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish.

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)

Basic test of cement:- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

Basic test of Aggregate:- Water Absorption, Specific Gravity,Impact Value, Crushing Value.

Fine Aggregate -silt factor

Steel Bar Testing- Upto 16 mm (set of 3 Bars)

Concrete Compressive strength of C.C. Cube ( set of 3 Cubes)

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Brick Water Absorption ( set of 5 Bricks) Compressive strength ( set of 5 Bricks) Efflorescence( set of 5 Bricks)

Strom water drain Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimming to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications As Directed.

Providing and laying rubble soling below foundation in layer including filing with rubble chips, murum etc complete as directed.

Providing and laying in situ cement concrete of grade M-10 of trap / granite / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed

Providing and laying in situ cement concrete of grade M-20 of trap/ granite / gneiss / quartzite/ graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. . with Batching Plant and Transit mixer including centering shuttering, scaffolding, placing tompacting, curing etc. complete with all lifts as directed

Providing and laying in situ cement concrete of grade M-20 of trap/ granite / gneiss / quartzite/ graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering shuttering, scaffolding, placing tompacting, curing etc. complete with all lifts as directed

Providing and laying in situ cement concrete of grade M-20 of trap/ granite / gneiss / quartzite/ graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. . with Batching Plant and Transit mixer including centering shuttering, scaffolding, placing tompacting, curing etc. complete with all lifts as directed

Providing and fixed reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (100 Kilogram)

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, Hooking the bars, binding with wires or tack welding and supporting as required complete as directed

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Basic test of cement :- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

Basic test of Aggregate:- Water Absorption, Specific Gravity,Impact Value, Crushing Value.

Fine Aggregate -silt factor

Steel Bar Testing- Upto 16 mm (set of 3 Bars)

Concrete Compressive strength of C.C. Cube ( set of 3 Cubes)

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Lake kerb wall with railing Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimming to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications As Directed.

Providing and laying rubble soling below foundation in layer including filing with rubble chips, murum etc complete as directed.

Providing and laying in situ cement concrete of grade M-10 of trap / granite / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed

Providing U.C.R. masonry in C.M. 1:6 in foundation upto plinth with lift upto 1.5 m. including striking joints, curing etc. complete as directed.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed

Providing and fixing mild steel grill railing 15 Kilogram/sq.m with Ghanateak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

Providing pointing with cement mortar for stone masonry including racking joints, centering, scaffolding, curing etc. complete as directed.

Providing and applying three coat of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days etc. complete.

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with Ghanateak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish

Basic test of cement :- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

Basic test of Aggregate:- Water Absorption, Specific Gravity, Impact Value, Crushing Value.

Fine Aggregate -silt factor

Steel Bar Testing- Upto 16 mm (set of 3 Bars)

Concrete Compressive strength of C.C. Cube ( set of 3 Cubes)

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Plantation Work Excavation : Excavation for foundation in Earth, Soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking or spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( Lift up to 0.00 to 1.50m.) By Manual Means. (Reference rate from PWD SSR 2022.23, w.e.t 25-07-2022, Sr.No. 720, Chapter Excavation, Item No. 21.01, Reference No BDA 1 Page No.153)

Excavation pit size 1.00 x 1.00 x 1.00 m for planting large flowering / shady tress (plant height 2 to 4 mtr.) palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs.

Garden Soil : Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading- unloading etc. (Lead charges per 70 km. considered Excluding royalty)

Farm Yard Manure : Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading- unloading etc. (Lead charges per 50 km. considered Excluding royalty)

Spreading fresh garden soil / silt & manure in excavated area including lead up to a distance of 50 mtrs (Rates Form PWD SSR 2022-23 / Sr. No. – 104 Item No- 2.30 Page No. 25)

Mixing garden soil / silt & mature thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete. (1/10 of unskilled labour i.e 648/10 + including (Overhead Charges 10% & Contractor Profit 10%) ( Labour Rates For PWD SSR 2022-23 / Sr. No. 62 Page no. 545)

Spreading fresh garden soil / silt & manure in excavated pit size area of 1.00 x 1.00 x 1.00 m.

Mixing garden soil / silt & mature thoroughly well, watering previous night. Planting required plant species as directed etc. complete. For required pit size 1.00 x 1.00 x 1.00 m.

Aboli

Allamanda

Anant

Tagar mini

Mogara

Ratrani

Jai (Jasmium grandiflorum)

Jui (Jasmium officinale)

Bakul Above 10 ft

Sonmohor Above 10 ft

Kadamb

Parijat

Sita ashok

KaduNeem

Peepal

Putranjivia

Silver Oak

Wad / banyan

Lake pathway Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimming to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications As Directed.

Providing and laying rubble soling below foundation in layer including filing with rubble chips, murum etc complete as directed.

Providing and laying in situ cement concrete of grade M-10 of trap / granite / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed

Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness of having a strength of 300 Kilogram/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.

Basic test of cement:- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

Basic test of Aggregate:- Water Absorption, Specific Gravity, Impact Value, Crushing Value.

Fine Aggregate -silt factor

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Benches and Dustbin (Nirmalya kalash ect) Garden Bench with Arm

Grabage bin 1100 Ltr metal (mild steel) OD: L 1320 X W 1045 X H 1250 (MM) Capacity 1100 Liter. 1.6 mm MS plate used for making wall and 1 mm plate used for lid, 5 mm angle for base, 1.6 mm pipe top for unit heavy duty wheel having 200 mm dia. BMC Compactor Friendly.

WHEEL DUST BIN 240 LTR. : Capacity 240 ltr. Made from superior material quality and workmanship, low dead weight, user friendly. These are the outstanding features of the wheel plastic container. Wheels are made from solid rubber tyres.

WHEEL DUST BIN 120 LTR. : Capacity 120 ltr. Made from superior material quality and workmanship, low dead weight, user friendly. These are the outstanding features of the wheel plastic container. Wheels are made from solid rubber tyres.

Chain link fencing work Excavation for deep trenches for laying rising main in Earth Soil of all types, sand, gravel and soft murum including trimmimg to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 1 km and all lifts as directed, preparing the bed for foundation and necessary safety precautions, keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications as directed

Providing and laying rubble soling below foundation in layer including filing with rubble chips, murum etc complete as directed.

Providing and laying in situ cement concrete of grade M-10 of trap / granite / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed

Providing U.C.R. masonry in C.M. 1:6 in foundation upto plinth with lift upto 1.5 m. including striking joints, curing etc. complete as directed.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Providing pointing with cement mortar for stone masonry including racking joints, centering, scaffolding, curing etc. complete as directed.

Providing and applying three coat of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days etc. complete.

Providing and erecting chain link fencing 1.6 M. height with G.I chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, including excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S Angles at top and bottom of 25 x 25 x 5 mm and vertical M.S. Flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 Kilogram to 20 Kilogram. Per Sq.m.) Spec. one Number: as directed by Engineer-in-charge.

Fixing in position Cautionary / andatory sign boards in ground with C.C. 1:4:8 block of 60 cm x 60 cm x 75 cm size etc. complete as directed including all leads.

Providing and fixing Mandatory / Regulary sign boards in circular shape of ---- mm dia made out of ---- mm aluminium sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting- HIP) having pressure sensitive / heat activated adhesive retro reflective specified back ground, border and back side retro reflective symbols, letters, numbers, arrow as per IRC:67-2012 Table No 8.3 supported with back support frame 25 mm x 25 mm x 3 mm, duly painted on back side with grey stove enamel paint and supported on one no. of M.S angle iron post of size 65 mm x 65 mm x 6 mm, 3.45 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I fixtures etc; fixing the boards M25 grade concrete block of size 60 cm x 60 cm x 75 cm including transportation etc; complete. Class B (Type IV high intensity micro-prismatic grade sheeting-HIP) Shall have 7 years written warranty from the manufacturer and authorized distributor / convertor issued for field performance including the screen printed areas and cut -out sheeting and cut –out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor / supplier

Basic test of cement:- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

Basic test of Aggregate:- Water Absorption, Specific Gravity, Impact Value, Crushing Value.

Fine Aggregate -silt factor

Steel Bar Testing- Upto 16 mm (set of 3 Bars)

Concrete Compressive strength of C.C. Cube ( set of 3 Cubes)

Rubble stone Stone / Rubble- Crushing Value / Compressive strength, Water Absorption & Specific Gravity

Solar lighting LED type solar street light fixtures with heat sink for LED, crystalline / polycrystalline silicon solar PV modulus, suitable size of maintenance free battery along with 5.5 mtr, 65 mm dia GI pole with civil foundation, base plate, nut, bolts etc and all accessories required for completing installation as per specification. SITC of 20 Watt LED solar street light system with 5 years warranty as per specification.

Please Enable Macros to View BoQ information