Shifting HT/LT poles and lines for Vaduthala ROB work at Vaduthala

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp /dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Installation of Insulation piercing connector for main to service line main :25-95 sqmm, Tap : 25-95 sqmm

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling

Providing one Driven Earth using GI earth pipe at standard distance away from the pole/structure in loose soil.

Providing Stay for LT poles incl. digging & back filling pit.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged HT TW/RSJ/Rail Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking

RMU foundation suitable for CCT, CCCT types with Elevated Transformer plinth

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Erection of LT 2 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Dismantling of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16 (Street Light) + 1 x 50 Sq.mm. (Insulated Messenger)

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable).

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Cost of construction of foundation, base plates, fixing anchor bots, loading & unloading, handling, erection, allignment and allied works for the installation of Data Aquisition compatible Extensible type Ring Main Units with terminal protector boots & extension modules, actuators for remote operatios, communicable FPIs, CTs, PTs & relay contacts for SCADA, giving power & control wiring and connections, providing terminal protector, interconnecting RMU bus bar and control cables, providing metered LT supply from nearest LT pole, providing 2 nos pipe earthing, cable mounting & terminations, giving connections after ascertaing proper phase sequence, providing location name & warning boards, burying cables & refilling, conducting all recommissioning tests as required, complete, except cost of conveyance. Additional rate for RMUs with one additional Load Break switch / VCB

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same

Cost of construction of foundation, base plates, fixing anchor bots, loading & unloading, handling, erection, allignment and allied works for the installation of Data Aquisition compatible Extensible type Ring Main Units with terminal protector boots & extension modules, actuators for remote operatios, communicable FPIs, CTs, PTs & relay contacts for SCADA, giving power & control wiring and connections, providing terminal protector, interconnecting RMU bus bar and control cables, providing metered LT supply from nearest LT pole, providing 2 nos pipe earthing, cable mounting & terminations, giving connections after ascertaing proper phase sequence, providing location name & warning boards, burying cables & refilling, conducting all precommissioning tests as required, complete, except cost of conveyance. RMUs with two nos load break switches & one VCB

Dismantling of suspension clamp suitable for LT AB cable

Dismantling of Anchor clamp / dead end clamp for LT AB cable

Dismantling one damaged LT TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Cost for 50x25x5cm top RCC protection slabs(6mm MS rods 10cm c/c both ways ) using RCC 1:2:4 using 20mm broken stone in storage yard,etched with letter of size 5cm "KSEB 11kV & DANGER

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same

Providing End Caps

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Doing outdoor/indoor cable termination of 3x300 mm2 11KV XLPE cable very carefully observing directions of manufactures and departmental staff including crimping of socket (cost index(e) : 1 included in Rate)

Dismantling transformer station in DP structure excluding the rate of dismantling earthing

Erecting one 160kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Hire charges for mobile crane.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification.

Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

CONSOLIDATED BOQ (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Quoted Amount of BOQ1 in figures

GST Rate in percentage