Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹2.3 LAccepted-AOC | l1 | Accepted-AOC tender accepted | |
| 2 | l2₹2.6 L+₹38,038 (16.8%)Rejected-Finance | l2 | Rejected-Finance highest tender quated | |
| 3 | Rejected-Technical | - | Rejected-Technical l3 |
| Sl No | Description | Qty | Unit | kamarudheen km L2 | C.M TIPPU L3 | HARIF K RAHMAN L1 |
|---|---|---|---|---|---|---|
| 1.00Water filter | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.86 | cum | 325.19 ₹280.96 | 326.49 ₹282.09 | 278.41 ₹240.55 Lowest |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 1.89 | cum | 7,462.29 ₹14,103.73 | 7,492.14 ₹14,160.14 | 6,388.81 ₹12,074.85 Lowest |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 1.94 | cum | 6,830.19 ₹13,277.89 | 6,857.51 ₹13,331 | 5,847.64 ₹11,367.81 Lowest |
| 1.00 | 50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | 1.7 | cum | 575.78 ₹979.4 | 578.08 ₹983.31 | 492.96 ₹838.52 Lowest |
| 1.00 | 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | 18.72 | sqm | 1,194.7 ₹22,364.78 | 1,199.48 ₹22,454.27 | 1,022.84 ₹19,147.56 Lowest |
| 1.01 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 40.5 | kg | 184.86 ₹7,486.83 | 185.6 ₹7,516.8 | 158.27 ₹6,409.94 Lowest |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 576 | kg | 168.83 ₹97,246.08 | 169.51 ₹97,637.76 | 144.54 ₹83,255.04 Lowest |
| 1.01 | OD417905/2024-2025::Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation
as approved by Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using
self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/
vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. OD71/21-22 (Approved data vide CE circular dated 18.08.2016) | 4.05 | sqm | 849.07 ₹3,438.73 | 852.47 ₹3,452.5 | 726.93 ₹2,944.07 Lowest |
| 1.01 | OD417904/2024-2025::Providing and fixing precoated Aluminium sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, using self drilling/self tapping screws complete:
Ridges plain (500-600 mm) OD 70/21-22 Modified DAR 12.51.1 | 15 | metre | 570.44 ₹8,556.6 | 572.72 ₹8,590.8 | 488.38 ₹7,325.7 Lowest |
Tender Value
₹2.4 L
EMD Value
₹6,037
Closing Date
14 Feb 2025, 3:30 pmClosed
Assistant Engineer
Assistant Engineer Eloor municipality
Annual Plan-Eloor municipality Proj.462/24- 25-Providing basic facilities for fixing water purifier at various places-General Civil Wor
2025_LSGD_735893_1
462/ET/AE/LSGD/ELR/2024-25
Open Tender
Civil Works - Others
Item Rate
180 days
Eloor municipality
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
₹6,037
16 Sept 2025
8 Feb 2025
17 Feb 2025
8 Feb 2025
14 Feb 2025
8 Feb 2025
Amount
Water filter
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD417905/2024-2025::Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. OD71/21-22 (Approved data vide CE circular dated 18.08.2016)
OD417904/2024-2025::Providing and fixing precoated Aluminium sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, using self drilling/self tapping screws complete: Ridges plain (500-600 mm) OD 70/21-22 Modified DAR 12.51.1
50.18.9.1.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm dia 10Kgf/cm2
50.18.9.2.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2
50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
OD418006/2024-2025:Enguaging mancoolie
OD418089/2024-2025:Supply and planting of Spider Lilly around 0.15-0.3m depth ,dig a 0.3m square ,soil mix with manure and planting after that buried with mixed soil all complete as per the direction of Engineer in Charge.
OD418092/2024-2025::Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-in-charge. OD 80/21-22
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
kamarudheen km (BID ID -2104121)
C.M TIPPU (BID ID -2104321)
Bidder Name
kamarudheen km
C.M TIPPU
HARIF K RAHMAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1179166.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .