UPGRADATION OF VARIOUS BARDA GHED ROADS IN VILLAGE KINDERKHEDA AND SISLI OF PORBANDAR TALUKA AND DISTRICT

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder, Conditions

of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are given to

provide a common basis for bidding. The basis of payment will be the actual quantities of work

ordered and carried out, as measured by the Contractor and verified by the Engineer and

valued at the rates and prices tendered in the priced Bill of Quantities, where applicable, and

otherwise at such rates and prices as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it is

otherwise provided under the Contract, include all constructional plant, layout, supervision,

materials, erection, maintenance, insurance, profit, taxes and duties, together with all general

risks, liabilities and obligations set out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether quantities

are stated or not. The cost of Items against which Contractor has failed to enter a rate or price

shall be deemed to be covered by other rates and prices entered in the Bill of Quantities (in

case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in the items

provided in the priced Bill of Quantities, and where no Items are provided the cost shall be

deemed to be distributed among the rates and prices entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily repeated or

summarized in the Bill of Quantities. References to the relevant sections of the contract

documentation shall be made before entering rates or prices against each item in the Bill of

8. The method of completed work of payment shall be in accordance with the specification for

Road and Bridge works. For building works specifications for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to Clause

of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required blasting, or the

use of metal wedges and sledgehammers, or the use of compressed air drilling for its removal,

and which cannot be extracted by ripping with a tractor of at least 150 kw with a single rear

mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (with brief Quantity Unit Rate in Amount

No. specification and reference to book Figures

of specifications)

1 Jungle Clerance (Ganda Baval etc) of Light/ 62000.00 Sqmt. 3.80

Heavy Dence (work done by manually or by

machinery) including grabbing of &

Removing the roots & grith completely from

the ground & back fill with earth & making

surface good as in earth as directed

including depositing & removing the

material away from the site of work at own

risk and cost as and where directed etc.

completed for following (a) light density

2 Providing murrum including spreading the 17438.00 Cumt. 237.46

same and dressing the side slope & top

surface in required grade and camber with

lead upto 5.0 km etc. complete.

3 Rolling and consolidation using vibratory 17438.00 Cumt. 33.09

road roller 8-10 tonne capacity (incl.

watering) (A) earth work (layer not

exceeding 200mm thickness)

Rs. Rupees Fourty Nine Lac Fifty Three Thousand Four Hundred Fifty and Ninty

I/We am/are willing to carry out the work at……………. % above/below percent (Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Signature of Contractor Executive Engineer

Salinity Control Division

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

specification and In In

reference to book of figures Words

specifications)

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C) Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken

as per Govt. G.R. PRC-10/2017 Cement Consumption/16/C Date:- 11/05/2017 as

stated in S.O.R. therefore in R.C.C. items where is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.