Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹98,131.33Admitted-Finance | -0.12% | ₹98,131.33 | L1 | Admitted-Finance |
| 2 | L2₹1.0 LAdmitted-Finance | +2.00% | ₹1.0 L | L2 | Admitted-Finance |
| 3 | L2₹1.0 LAdmitted-Finance | +2.00% | ₹1.0 L | L2 | Admitted-Finance |
Tender Value
₹1.0 L
EMD Value
₹2,020
Closing Date
19 Mar 2026, 4:00 pmClosed
EXECUTIVE ENGINEER REW RAJOURI
OFFICE OF EXECUTIVE ENGINEER REW RAJOURI
Read BOQ
2026_RDPR_306112_12
e-NIT No. 337 REW Rajouri of 2025 Dated 05-03-2026
Open Tender
Civil Works
rajouri
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Executive Engineer REW Rajouri
₹2,020
4 Apr 2026
14 Mar 2026
20 Mar 2026
14 Mar 2026
19 Mar 2026
14 Mar 2026
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4 Cast in situ c.concrete 1:5:10 using 40 mm nominal size stone aggregate.
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement of R.c.c work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar.
Extra for brick work in superstructure above plinth level (by manual mean).
Centering and shuttering including strutting, propping etc. and removal of form work for a) Foundations, footings, bases for columns
Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platforms
Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slab(under 20 cms wide)
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) in Ceiling
CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
15mm Cement plaster on the rough side of mix: 1 : 6 ( 1 cement : 6 fine sand)
Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
Colour washing such as green blue or buff to give an even shade New work (two or more coats) with a basecoat of white washing with lime.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
ainting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall 15 mm dia. nominal bore Medium
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
Carriage of Sand & Agg for distance 40 km MT & 100 mtr by h/
Carriage of Bricks for30 kmt Mt & 100 mtr by h/l
Add Provision for Sign Board
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
BOQ_994098.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid