Special repair to security fencing in front of Offrs md accn at DSC Centre and Provn of chequered tile for path and hard standing near bldg. No 105 at DSC Records under AGE (I) Cannanore.

Amount

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil all as directed. Note : Rates included the cost of surface dressing 30cm wide on either side of fencing and removing rubbish out side MD land.

Dismantling RCC fencing post/struts of any section including taking out embedded portion and making good disturbed ground and removing rubbish out side MD land all as directed.

Dismantling RCC fencing post/struts of any section including taking out embedded in concrete and making good disturbed ground and removing rubbish out side MD land all as directed.

Dismantling barbed wire fencing, any type and size all as directed.

M&L PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L PCC 1:3:6, Type C2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L mild steel works as in post and struts in fencing including cutting tops to shape as directed, welding, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 410-0 or Fe-310-0 all as specified and directed.

M&L galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of strandard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire , stples or steel pins etc as directed (each line wire to be measured) all as specified and directed.

M&L preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil all as specified and directed.

Excavating in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation, etc and n exc 10sqm on plan and getting out in hard/dense soil all as specified and directed.

M&L for providing pre-cast cement concrete block masonry with solid blocks, exc.10cm in width with PCC (1:3:6), type C1, using 20mm graded stone aggregate and set in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete surfaces, finished even and smooth without using extra cement all as specified and directed .

Returning and filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soil obtained from excavation all as directed

Removing excavated materials (soil) to a distance n exceeding 50m and depositing where directed at a level 1.5m above starting point all as specified and directed.

M&L for hard core of guage n.exc 63mm broken stone or boulders, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified and directed

M&L 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in flooring and pavings finished fair and even withou using extra cement including necessary form work complete all as specified and directed .

M&L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes all as specified and directed.

M&L coloured chequered cement concrete tiles, 250x250x25mm thick set, jointed and pointed in neat cement slurry in floor with grey cement and pigments all as directed. Note: Screed shall be measured and paid seperately.

Sujith T