Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹20.9 L
EMD Value
₹20,888
Closing Date
2 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Capital Project Division No.1, Gandhinagar
2059 P.W. M&R To N.R. Bldg. - Repairing Work At Patnagar Yojana Bhavan [A, B, C Blocks] At Sector No.16, Gandhinagar For Furniture Work And Civil Work Like Door, Window, Water Supply And Drainage Work With China Mosaic And Water Proofing Work [For 12 Months]
366092
Tender Notice No.39 of 2026-27 (2nd Attempt)
Open
Civil - All
Works
Gandhinagar
6 documents required · 6 mandatory
₹900
Executive Engineer, Capital Project Division No.1, Gandhinagar.
₹20,888
17 Nov 2026
17 Nov 2026
17 Nov 2026
2 Dec 2026
17 Nov 2026
90 days
MEMORANDUM SHOWING THE ITEM OF WORK TO BE CARRIED OUT
It. Quantities Item of Estimated Rates Unit Total amount
It. Quantities Item of Estimated Rates Unit Total amount
but may be Work In Figures In Words according to
more Rs./ Paise estimated
or less quantities
1 9.00 Item No.1 577.92 Rupees Five Hundred Seventy Cmt
Demolition of brick work & stone masonry including stacking of Seven and Paise Ninety Two Only
serviceable materials and disposal of unserviceable materials with
all lead and lift.
[II] In cement mortar
2 96.00 Item No.2 50.11 Rupees Fifty and Paise Eleven Smt
Dismantling tiled or stone floors laid in mortar including stacking Only
of serviceable materials and disposal of unserviceable materials
with all lead and lift.
3 4.00 Item No.3 4502.81 Rupees Four Thousand Five Cmt
Brick work using common burnt clay conventional building Hundred Two and Paise Eighty
bricks having crushing strength not less than 35kg/sqcm in One Only
superstructure for second floors in cement mortar 1:6 (1cement :
6fine sand) including curing etc. complete.
341, S.D.3, B-1 Tender
4 12.00 Item No.4 685.79 Rupees Six Hundred Eighty Five Smt
Half brick masonry in common burnt clay conventional building and Paise Seventy Nine Only
bricks having crushing strength not less than 35kg/sqcm in C.M.
1:4 (1cement : 4coarse sand) in superstructure up to floor two
[B] Conventional
5 100.00 Item No.5 165.02 Rupees One Hundred Sixty Five Smt
Providing 15mm thick cement plaster in single coat mala on and Paise Two Only
rough side of half brick wall for interior plastering finished even
and smooth for all floor including curing etc. complete in Cement
mortar 1:4 (1cement : 4fine sand)
6 36.00 Item No.6 1331.22 Rupees One Thousand Three Smt
Providing and laying 24" x 24" vitrified 8mm thick tiles flooring Hundred Thirty One and Paise
over 20mm (average) base of cement mortar 1:6 (1cement : Twenty Two Only
6coarse sand) on new surface or fixing on existing flooring by
adhesive material including dismantling of existing flooring and
jointed with colour cement slurry including finished with flush
pointing & cleaning the surface etc. complete for light shade.
7 24.00 Item No.7 1017.30 Rupees One Thousand Seventeen Smt
Providing and laying ceramics tiles 6mm thick in flooring, treads and Paise Thirty Only
of steps & landing laid on a bed of 12mm thick cement mortar 1:3
(1cement : 3coarse sand) finishing with flush pointing in white
8 28.00 Item No.8 1127.48 Rupees One Thousand One Smt
Providing and laying white glazed tiles 6mm thick in skirting, Hundred Twenty Seven and Paise
risers of steps and dedo on 10mm thick cement plaster 1:3 Forty Eight Only
(1cement : 3coarse sand) and jointed with white cement slurry.
341, S.D.3, B-1 Tender
9 7.00 Item No.9 3300.68 Rupees Three Thousand Three Smt
Providing and laying 18mm thick polished black granite stone Hundred and Paise Sixty Eight
slab machine cut in single piece in sill and jambs laid on 10mm Only
thick cement mortar 1:3 (1cement : 3coarse sand) laid over and
jointed with grey cement slurry including rubbing and polishing
10 312.00 Item No.10 136.78 Rupees One Hundred Thirty Six Smt
Finishing wall with Apex weather proof exterior emulsion paint and Paise Seventy Eight Only
with primer on wall surface (two coats) to give an required shape
even shade after thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials etc. complete.
11 540.00 Item No.11 123.78 Rupees One Hundred Twenty Smt
Wall painting two coats with plastic emulsion paint of approved Three and Paise Seventy Eight
brand and manufacture on new wall surface to give an even shade Only
including two coats of Birla or Asian Acrylic Lapy (putty) & two
coats of primer of approved brand including thoroughly brushing
the surface free from mortar dropping and other foreign matter
and sand papered smooth.
12 4.00 Item No.12 2682.56 Rupees Two Thousand Six No.
Providing and fixing star white wash down water closet squatting Hundred Eighty Two and Paise
pan EWC (European Type W.C. Pan) with integral P or S trap Fifty Six Only
including jointing the trap with soil pipe in C.M. 1:1 including
seat cover, Health Faucet with hook and fittings and 25mm dia
Flush cock as per instruction of EIC Complete. [For All floor]
341, S.D.3, B-1 Tender
13 4.00 Item No.13 2416.71 Rupees Two Thousand Four No.
Providing and fixing wash basin starwhite MARIO 550 x 400mm Hundred Sixteen and Paise
size or size required as per site with colour M.S. bracket including Seventy One Only
cutting holes and making good the same including fixing quarter
turn C.P. Brass pillar cock, angular stop cock, C.P. Brass
extension nipple 62mm long, S.S. Flange water super connection
pipe 60cm long and full thread waste coupling etc. complete for
14 6.00 Item No.14 1074.86 Rupees One Thousand Seventy No.
Providing and fixing urinal or approved quality including Four and Paise Eighty Six Only
connecting the urinal with waste pipe, trap etc. complete.
[A] White earthenware flat back or corner type size 430mm x
15 4.00 Item No.15 1432.99 Rupees One Thousand Four No.
Providing and fixing water closet squatting pan (Indian type W.C. Hundred Thirty Two and Paise
pan) size 580mm including providing and fixing footrest and Ninety Nine Only
100mm size P or S trap jointing the trap with soil pipe in C.M. 1:1
(1 cement 3 fine sand) etc. complete.
[A] Vitreous china
[I] Long pattern white colour
16 15.00 Item No.16 823.15 Rupees Eight Hundred Twenty No.
Providing and fixing Bib cock (Stainless steel body) with wall Three and Paise Fifteen Only
flange with C.P. brass extension nipple 62mm long etc. complete.
17 15.00 Item No.17 205.83 Rupees Two Hundred Five and No.
Providing and fixing C.P. brass angular stop cock polish bright Paise Eighty Three Only
15mm dia with C.P. brass extension nipple 62mm long etc.
341, S.D.3, B-1 Tender
18 10.00 Item No.18 263.77 Rupees Two Hundred Sixty Three No.
Providing and fixing chromium plated brass half turn flush cock and Paise Seventy Seven Only
of approved quality including fixing in pipe line etc. complete.
[II] 25mm diameter
19 15.00 Item No.19 669.34 Rupees Six Hundred Sixty Nine No.
Supplying and fixing health faucet ABS SS braided hose 1m with and Paise Thirty Four Only
20 60.00 Item No.20 80.71 Rupees Eighty and Paise Seventy No.
Supplying and fixing PVC flexible waste pipe for all types of One Only
21 10.00 Item No.21 268.72 Rupees Two Hundred Sixty Eight No.
Providing and fixing 5mm thick mirror of approved quality and and Paise Seventy Two Only
make size 600 x 450mm with moulding edge complete. For all
22 2.00 Item No.22 1684.68 Rupees One Thousand Six No.
Providing, fixing, testing & commissioning of G.I. flanged end Hundred Eighty Four and Paise
lever operated butterfly valve confirming to IS of Audco or Sixty Eight Only
equivalent with necessary specials, unions, nipple, G.I. bolt nut,
EPDM rubber washers as per drawing & specifications etc.
complete. 50mm dia.
23 2.00 Item No.23 3136.05 Rupees Three Thousand One No.
Providing, fixing, testing & commissioning of G.I. flanged end Hundred Thirty Six and Paise Five
lever operated butterfly valve confirming to IS of Audco or Only
equivalent with necessary specials, unions, nipple, G.I. bolt nut,
EPDM rubber washers as per drawing & specifications etc.
complete. 100mm dia.
24 5.00 Item No.24 662.56 Rupees Six Hundred Sixty Two No.
Providing and fixing 50mm dia valve for UPVC line as and where and Paise Fifty Six Only
required as per the design and fixing as per the instruction of
Engineer in charge etc. complete as directed.
341, S.D.3, B-1 Tender
25 5.00 Item No.25 499.95 Rupees Four Hundred Ninety Nine No.
Providing and fixing 25mm dia valve for UPVC line as and when and Paise Ninety Five Only
required as per the design and fixing as per the instruction of
Engineer in charge etc. complete as directed.
26 5.00 Item No.26 453.49 Rupees Four Hundred Fifty Three No.
Providing and fixing 15mm dia brass valve for UPVC line as and and Paise Forty Nine Only
when required as per the design and fixing as per the instruction
of Engineer in charge etc. complete as directed.
27 30.00 Item No.27 195.67 Rupees One Hundred Ninety Five Rmt
Providing, laying and jointing in true line and level 50mm dia and Paise Sixty Seven Only
UPVC pipe (SCH.40) for cold water including fittings as
approved by Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two meter c/c or shall be
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
28 30.00 Item No.28 91.84 Rupees Ninety One and Paise Rmt
Providing, laying and jointing in true line and level 25mm dia Eighty Four Only
UPVC pipe (SCH.40) for cold water including fittings as
approved by Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two meter c/c or shall be
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
29 53.00 Item No.29 72.65 Rupees Seventy Two and Paise Rmt
Providing, laying and jointing in true line and level 15mm dia Sixty Five Only
UPVC pipe (SCH.40) for cold water including fittings as
approved by Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two meter c/c or shall be
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
341, S.D.3, B-1 Tender
30 76.00 Item No.30 280.23 Rupees Two Hundred Eighty and Rmt
Providing and fixing to wall ceiling and floor 10.0kgF/cm2 Paise Twenty Three Only
working pressure polyethylene pipes of the following outside
diameter, low density, complete with special flange compression
type fittings, wall clips etc. including making good the wall
ceiling and floor.
[F] 75mm diameter
31 102.00 Item No.31 339.05 Rupees Three Hundred Thirty Nine Rmt
Providing and fixing to wall ceiling and floor 10.0kgF/cm2 and Paise Five Only
working pressure polyethylene pipes of the following outside
diameter, low density, complete with special flange compression
type fittings, wall clips etc. including making good the wall
ceiling and floor.
[G] 110mm diameter
32 12.00 Item No.32 599.64 Rupees Five Hundred Ninety Nine No.
Providing and fixing PVC SWR nahni trap IS 14735 for drain and Paise Sixty Four Only
100mm diameter with jali of the following nominal diameter of
self cleaning design with C.I. screwed down or hinged grating
including the cost of cutting and making good the wall.
33 5.00 Item No.33 1246.92 Rupees One Thousand Two No.
Providing and fixing square mouth trap P or S type of 150mm x Hundred Forty Six and Paise
100mm size. S.W. gully trap with C.I. cover with frame of Ninety Two Only
300mm x 300mm size (Inside) with standard weight.
341, S.D.3, B-1 Tender
34 105.00 Item No.34 613.26 Rupees Six Hundred Thirteen and Smt
Providing and fixing pre-cast rubber Dye/Steel Dye inter locking Paise Twenty Six Only
concrete block 60mm thick with grade of concrete M.20
pneumatic compressed / vibrated mechanically and as per
approved design confirming to IS 15658:2006 including 35mm
Sand layer for levelling and filling the joint with sand in proper
line and level as per guidelines of IRC: SP 63-2018 etc. complete
as directed by Engineer in charge.
35 25.00 Item No.35 374.92 Rupees Three Hundred Seventy Rmt
Providing and fixing pre-cast concrete kerb stone of gray cement Four and Paise Ninety Two Only
based concrete block 30cm length, 30cm height and 15cm thick of
M.250 grade concrete as per approved design and including
excavation for fixing in proper line and level, filling the joint with
C.M. 1:3 (1cement : 3fine sand) etc. complete.
36 333.00 Item No.36 88.38 Rupees Eighty Eight and Paise Kg.
Steel work welded, in built up sections, framed work including Thirty Eight Only
cutting, hoisting, fixing in position and applying a priming coat of
read lead paint. [A] In beams and joists, channels, angles, tees,
flats with connecting plates or angle cleats as in main & cross
beams hip & jack rafters, purlins connected to common rafters
37 184.00 Item No.37 92.20 Rupees Ninety Two and Paise Smt
Painting two coats (excluding priming coat) on new steel and Twenty Only
other metal surfaces with enamel paint, brushing, interior to give
an even shade including cleaning the surface of all dirt, dust and
other foreign matter.
38 15.00 Item No.38 503.99 Rupees Five Hundred Three and No.
Providing and fixing S.S. Aldrop of 300mm long with all Paise Ninety Nine Only
material, hardware and labour etc. complete.
341, S.D.3, B-1 Tender
39 15.00 Item No.39 119.18 Rupees One Hundred Nineteen and No.
Providing and fixing S.S. Handle of 150mm long all material, Paise Eighteen Only
hardware and labour etc. complete.
40 10.00 Item No.40 1105.95 Rupees One Thousand One No.
Providing and fixing door closers of 'EG' or equivalent make with Hundred Five and Paise Ninety
all necessary fixtures and hardware. Five Only
41 20.00 Item No.41 657.51 Rupees Six Hundred Fifty Seven No.
Providing and fixing Mortise lock of Godrej or equivalent make and Paise Fifty One Only
with all necessary fixtures and hardware.
42 30.00 Item No.42 20.55 Rupees Twenty and Paise Fifty Smt
Removing and scraping of old deteriorated plaster of any Five Only
thickness from masonry/R.C.C. member including stacking of
serviceable from site of work.
43 79.00 Item No.43 303.00 Rupees Three Hundred Three Only Smt
Overhauling of alluminium glass door / window / ventilation of
existing building with necessary fittings and fixtures matching
with the all specification with existing glass door bring in to
working condition upto the satisfaction of Engineer in charge.
44 24.00 Item No.44 353.50 Rupees Three Hundred Fifty Three Smt
Overhauling of single or double shutter solid core flush door / and Paise Fifty Only
FRP door of existing building with necessary fittings and fixtures
matching with the all specification with existing door bring in to
working condition upto the satisfaction of Engineer in charge.
45 13.00 Item No.45 639.72 Rupees Six Hundred Thirty Nine Cmt
Demolition and disposal of unserviceable materials with all lead and Paise Seventy Two Only
[II] Unreinforced concrete
341, S.D.3, B-1 Tender
46 25.00 Item No.46 197.09 Rupees One Hundred Ninety Each
Dismantling doors, windows, ventilators etc. (wood or steel) Seven and Paise Nine Only
shutters including chowkhats, architraves, holdfasts and other
attachment etc. complete and stacking them within all lead and
[I] Not exceeding 3smt in area
47 50.00 Item No.47 779.70 Rupees Seven Hundred Seventy Smt
Providing and laying broken china mosaic flooring for terrace Nine and Paise Seventy Only
using 12mm to 20mm broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be tempered to bring
mortar creme out up to surface using white cement including
rounding off junctions and extending them up to 15cm along the
wall, clearing with water and oxalic acid etc. as directed.
48 180.00 Item No.48 608.39 Rupees Six Hundred Eight and Smt
Providing and laying water proofing treatment of Dr. Fixit or Paise Thirty Nine Only
equivalent make as per instruction of Engineer in charge. All the
works shall be carried as directed by Engineer in charge,
Surface Preparation: Cleaning of existing surface from all dust
and debris by applying blower, washing the surface by jet spray,
Grinding the surface to proper slope and level to remove all
unnecessary materials 2. Primer Coat: Apply one coat of Dr. Fixit
Primeseal with part of water in the proportion of 2:1 (2 Part
Primeseal and 1 Part of water). Assume 0.15 liter per Sq.m. per
coat 3. Top Coat: Apply the two coat of Dr. Fixit New coat
without any dilution at the rate of 0.5 litre per Sq.m. and allow it
to dry before taking up the second coats, the rate of application
being the same. Drying time between coats will be 6 to 8 Hrs.
including grooves as per instruction of Engineer in charge.
341, S.D.3, B-1 Tender
49 130.00 Item No.49 1296.46 Rupees One Thousand Two Smt
Providing and fixing 0.5-6mm thick G.I. corrugated powder Hundred Ninety Six and Paise
coated sheet with G.I. plain and bitumen washer and screws, bolts Forty Six Only
with cutting, hosting, welding on existing M.S. angle posts fixing
in position etc. complete as per directed by Engineer in charge.
50 42.00 Item No.50 24.28 Rupees Twenty Four and Paise Rmt
Providing cement vata (10cm x 10cm size) quarter round in Twenty Eight Only
cement mortar 1:1 including neat cement finishing, watering etc.
51 50.00 Item No.51 315.69 Rupees Three Hundred Fifteen and Smt
Providing and laying cement concrete flooring 1:2:4 (1cement : Paise Sixty Nine Only
2coarse sand : 4graded stone aggregate 20mm nominal size) laid
in one layer finished with a floating coat of neat cement.
52 18.00 Item No.52 123.13 Rupees One Hundred Twenty Cmt
Excavation for foundation up to 1.5mt depth in Loose or soft soil Three and Paise Thirteen Only
including sorting out and stacking the excavated stuff up to
53 234.00 Item No.53 106.23 Rupees One Hundred Six and Paise Kg.
Providing and fixing M.S. grills of required pattern to frames of Twenty Three Only
windows etc. with M.S. flats at required spacing & frame around,
square or round bars with round headed bolts & nuts or by screws.
[A] Plain grill
54 60.00 Item No.54 328.25 Rupees Three Hundred Twenty No.
Providing and fixing Cabinet lock / drawer lock of godrej or Eight and Paise Twenty Five Only
equivalent make with all necessary fixtures and hardware.
341, S.D.3, B-1 Tender
55 12.00 Item No.55 1713.70 Rupees One Thousand Seven Smt
Providing and fixing window having extruded alluminium colour Hundred Thirteen and Paise
anodized section frame main outer size 63.50 x 38.10 x 1.95mm Seventy Only
(of Jindal Section No.4605 @ wt. 1.094kg/Rmt), horizontal two
track member size 61.85 x 31.75 x 1.20mm (of Jindal Section
No.8687 @ wt. of 0.695kg/mt), vertical member of size 61.85 x
31.75 x 1.30mm (of Jindal Section No.8758 @ wt. of
kg/mt) with sliding shutters of horizontal member size 40mm x
18mm x 1.29mm (of Jindal Section No.8949 @ wt. of
0.456kg/mt), vertical member of size 40mm x 18mm x 1.29mm
(of Jindal Section No.8947 @ wt. of 0.456kg/mt, Section No.8948
@ wt. 0.457kg/mt) with 5mm thick transparent bronze colour
tinted float glass with powder coated alluminium fittings and
fixtures and transparent silicon sealant glass fixing to frame as per
details etc. complete. For Window.
56 12.00 Item No.56 148.00 Rupees One Hundred Forty Eight Smt
Providing 10mm thick cement plaster in single coat on brick/ Only
concrete walls for interior plastering up to floor two level and
finished even and smooth including for plastering on ceilings and
soffits of stairs up to floor two level instead of plastering on walls.
[II] Cement mortar 1:4 (1cement : 4fine sand)
341, S.D.3, B-1 Tender
57 9.00 Item No.57 3052.46 Rupees Three Thousand Fifty Two Smt
Providing and fixing standard extruded alluminium openable and Paise Forty Six Only
window with 4mm thick plain glass with anodized hollow section
frame of approved shade & pivoted single shutter fabricated from
alluminium standard section for outer frame size 63.50 x 38.10 x
1.2mm (@ Wt. 0.643 Kg./Rmt) and window frame size same as
frame 63.50 x 38.10 x 1.2mm (@ Wt. 0.643 Kg./Rmt) 112mm x
44.45mm x 2mm @ Wt. 1.60 Kg./Rmt) including providing
rubber gasket and beading clips (@ Wt. 0.124 Kg./Rmt) including
providing heavy handle, locking arrangement, bracket, stoppers
etc. accessories fittings with silicon and all required supports,
materials labour and equipments as per directed by Engineer in
58 13.00 Item No.58 3036.06 Rupees Three Thousand Thirty Six Smt
Providing and fixing flush door shutters solid core construction and Paise Six Only
with frame of first class hard wood with cross board and face
veneer or plywood face panels including anodized alluminium
butt hinges with necessary screws, aldrops, stopper, handles etc.
[B] Flush door with both side decorative 1mm thick laminated
sheet with etc. with other miscellaneous fittings as per direction of
EIC. [2] 35mm thick
59 12.00 Item No.59 3001.89 Rupees Three Thousand One and Smt
Providing and laying 8mm thick glass on table with diamond edge Paise Eighty Nine Only
polish as per Engineer in charge.
60 6.00 Item No.60 5243.01 Rupees Five Thousand Two No.
Providing and fixing Drawer Unit 600 x 400 x 500mm with one Hundred Forty Three and One
drawer and one locker with locking system. Paisa Only
341, S.D.3, B-1 Tender
61 4.00 Item No.61 3859.21 Rupees Three Thousand Eight No.
Constructing brick masonry chamber of 500mm x 700mm inside Hundred Fifty Nine and Paise
dimension and depth upto 0.45m for underground C.I. inspection Twenty One Only
chamber and bends with bricks having crushing strength not less
than 35 Kg/Sqmt. in C.M. 1:5 pre-cast fibre reinforced concrete
frame & cover of square frame of approx 800 x 800 x 150mm &
round cover 75mm thick, R.C.C. top slab C.C. 1:2:4 (1cement :
2coarse sand : 4graded stone aggregate 20mm nominal size)
foundation concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.
62 29.00 Item No.62 3441.52 Rupees Three Thousand Four Smt
Providing & Placing in position Plywood Partition 75mm Thick Hundred Forty One and Paise Fifty
with 1mm thick both side laminate finish with 4 x 4mm Design Two Only
Groove as/Architect Design, Structure made from 50 x 25 x
mm alluminium Section and Both Side in 12mm BWP plywood
of standard make like Century, Greenlam, Marine, Greenply,
Saint-Gobain, Sainik etc. with edge finish in teakwood batten &
Melamine Polish on Batten Patti etc. complete, with all necessary
tools & Accessories etc. complete.
63 32.00 Item No.63 515.47 Rupees Five Hundred Fifteen and Smt
Providing and fixing non reflective solar contact film for fixing on Paise Forty Seven Only
glass. To be fixed as per the instructions of Engineer in charge.
Make as per tender or equivalent.
341, S.D.3, B-1 Tender
64 6.00 Item No.64 9818.13 Rupees Nine Thousand Eight Smt
Providing & Placing in position Plywood Partition 75mm Thick Hundred Eighteen and Paise
with 1mm thick Outside laminate finish & Inside 6mm Thick mdf Thirteen Only
(Water Proof MDF) with PU Finish With 4 x 4mm Design
Groove as/Architect Design, Structure made from 50 x 25 x
mm aluminium Section and Both Side in 12mm BWP plywood of
standard make like Century, Greenlam, Marine, Greenply, Saint-
Gobain, Sainik etc, with edge finish in teakwood batten &
Melamine Polish on Batten Patti etc. complete, with all necessary
tools & Accessories etc. complete. as per instruction given by
engineer in charge/Architect.
65 3.00 Item No.65 4920.55 Rupees Four Thousand Nine Smt
Providing & Placing in position modesty(privacy) panel of size Hundred Twenty and Paise Fifty
1675 X 1220 mm or 1700 x 1220 mm or as per requirement Five Only
having 1mm thick laminate finish Both side, Modestry(privacy)
Panel made from 19mm (2 Layer=38mm) BWP plywood of
standard make like Century, Greenlam, Marine, Greenply, Saint-
Gobain, Sainik etc, with edge finish in teakwood batten &
Melamine Polish on Batten Patti etc. complete, with all necessary
tools & Accessories etc. complete as per instruction given by
engineer in charge/Architect.
341, S.D.3, B-1 Tender
66 2.00 Item No.66 19682.31 Rupees Nineteen Thousand Six Smt
Providing & Placing in position table of size 2440 X 900 X 750 Hundred Eighty Two and Paise
mm with 1mm thick laminate finish outer side & Inside 0.8mm Thirty One Only
thick inner laminate Finish, Top & Side made from 19mm (2
Layer=38mm) BWP plywood of standard make like Century,
Greenlam, Marine, Greenply, Saint-Gobain, Sainik etc, with edge
finish in teakwood batten & Melamine Polish on Batten Patti etc.
complete, with all necessary tools & Accessories etc. complete.
After finishing 18mm Italian Marble with all Finishing need to be
provided as Top & With Chamfer Edges as per instruction given
by engineer in charge/Architect.
67 2.00 Item No.67 16806.96 Rupees Sixteen Thousand Eight Smt
Providing & Placing in position Low Height Storage of size 900 X Hundred Six and Paise Ninety Six
450 X 765mm with 1mm thick laminate finish outer side & Inside Only
0.8mm thick inner laminate Finish, Top, Bottom, Shelf & Both
Side & Shutter made from 19mm BWP plywood & back side in
12mm BWP plywood of standard make like Century, Greenlam,
Marine, Greenply, Saint-Gobain, Sainik etc. Drawer & Sliding
Shutter with edge finish in teakwood batten & Melamine Polish
on Batten Patti etc. complete, with all necessary tools &
Accessories etc. complete. As per instruction given by engineer in
charge/Architect.
341, S.D.3, B-1 Tender
68 8.00 Item No.68 4554.86 Rupees Four Thousand Five Smt
Providing & Placing in position Plywood Partition 75mm Thick Hundred Fifty Four and Paise
with 1mm thick Both side laminate finish With 4 x 4mm Design Eighty Six Only
Groove as/Architect Design and Plain/Frosted Film 8mm
Toughen glass in Middle of partition with both side finish in
teakwood batten & Melamine Polish on Batten Patti etc,
Structure made from 50 x 25 x 2.3 mm alluminium Section and
Both Side in 12mm BWP plywood of standard make like Century,
Greenlam, Marine, Greenply, Saint-Gobain, Sainik etc, with edge
finish in teakwood batten & Melamine Polish on Batten Patti etc.
complete, with all necessary tools & Accessories etc. complete.
As per instruction given by engineer in charge/Architect.
69 4.00 Item No.69 11103.79 Rupees Eleven Thousand One Smt
Providing & Placing in position table of size 1675 X 800 X 750 Hundred Three and Paise Seventy
mm or size 2135 X 900 X 75 with 1mm thick laminate finish Nine Only
outer side & Inside 0.8mm thick inner laminate Finish, Top &
Side BWP plywood of standard make like Century, Greenlam,
Marine, Greenply, Saint-Gobain, Sainik etc, with edge finish in
teakwood batten & Melamine Polish on Batten Patti etc.
complete, with all necessary tools & Accessories etc. complete.
After Finishing 8mm Toughen Glass with chamfer Edge need to
be provided as Top as per instruction given by engineer in
charge/Architect.
341, S.D.3, B-1 Tender
70 10.00 Item No.70 11081.29 Rupees Eleven Thousand Eighty Smt
Providing & Placing in position Operable Shutter Wardrobe of One and Paise Twenty Nine Only
size 1220 X 450 X 2440 mm with 1mm thick laminate finish
outer side & Inside 0.8mm thick inner laminate Finish, Top,
Bottom, Shelf & Both Side & Shutter made from 19mm BWP
plywood & back side in 12mm BWP plywood of standard make
like Century, Greenlam, Marine, Greenply, Saint-Gobain, Sainik
etc, with edge finish in teakwood batten & Melamine Polish on
Batten Patti etc. complete, with all necessary tools & Accessories
etc. complete. as per instruction given by engineer in
charge/Architect.
71 4.00 Item No.71 6899.31 Rupees Six Thousand Eight No.
Providing Decorative Center Table/Coffe Table size of 0.45 m x Hundred Ninety Nine and Paise
0.75 m x 0.45 m as directed by Engineer-in-charge with all Thirty One Only
necessary tools & Accessories etc. complete.
72 4.28 Item No.72 11314.87 Rupees Eleven Thousand Three Rmt
Providing Modern Sofa Length as per requirement (m) x 0.8m x Hundred Fourteen and Paise
0.8m as Shown in architecture images using plywood Structure in Eighty Seven Only
frame & legs in M.S. powder coating, Standard Foam Sheet To be
Used in Seating & Back Rest of Sofa 4 inch as base and 2 inch on
top as soft foam Brand Like Curlon(20 year warranty on foam)for
better comfort & Standard Company Fabric All Side as directed
by Architect/Engineer-in-charge with all necessary tools &
Accessories etc. complete.
73 28.00 Item No.73 1149.89 Rupees One Thousand One Smt
Providing Modern Arabian Style curtain including Standard Hundred Forty Nine and Paise
Fabric+Black Out in Back Side+Channel+Sweiving +Press Of Eighty Nine Only
Curtain+Fitting as directed by Engineer-in-charge with all
necessary tools & Accessories etc. complete.
341, S.D.3, B-1 Tender
74 25.00 Item No.74 919.91 Rupees Nine Hundred Nineteen No.
Providing and fixing in position 150 mm high, English letters and Paise Ninety One Only
made from 1.5 mm thick stainless steel Plate (500mm x 175mm)
sheet as directed by Engineer-in-charge with all necessary tools &
plants etc. complete. As directed by engineer in charge
75 22.00 Item No.75 2859.59 Rupees Two Thousand Eight Smt
Providing and fixing Zebra blind roller curtain with superior Hundred Fifty Nine and Paise Fifty
quality Acmeda Mechanism including all necessaries fitting like Nine Only
breaket chain etc. complete as per instruction of Engineer in
charge. Make as per tender or equivalent.
76 40.00 Item No.76 1198.59 Rupees One Thousand One Smt
Providing & Fixing Flase Ceiling of Aerolight light weight Hundred Ninety Eight and Paise
calcium silicate tiles Tegular Edge of Size 595 x 595 x 15mm Fifty Nine Only
densified edge, having 100% humidity resistance and
incombustible as per BS 476 Part -4 with thermal conductivity of
0.043 W/m0 kC, with NRC of 50 and approved surface design to
be placed in the grid suspended ceiling with border of gypsum
sheet. Grid system made of Galvanised steel section with main
"T" runner 3.6 mt long with size 38 x 24 x 0.30 mm spaced at
1200 mm c/c and cross "T" of 1.2 mt long with size 24 x 24 x
0.30 mm spaced between main "T" at 600 mm c/cto form a grod
of 600 x 1200 mm and secondary cross "T" of length 600 mm to
be inter locked at middle of the 600 x 1200 mm panel to be fixed
all around the perimeter of the wall. The main "T" runner to be
suspended from the ceiling using GI sloted cleats and 50 mm long
dash fastners, 4 mm GI adjustable rods with galvanised level clips
with all labour and material and as directed by Engineer Incharge
341, S.D.3, B-1 Tender
77 16.00 Item No.77 8201.51 Rupees Eight Thousand Two Smt
Providing and fixing 30mm thick double door flush shutters, solid Hundred One and Paise Fifty One
core construction with frame of first class hard wood with cross Only
board and face veneer or plywood face panels, having S.S. pattern
grill and also fix partition plain glass 4mm thick, including hinges
with necessary screws, hinges, aldrops, stopper, handles etc.
78 10.00 Item No.78 460.66 Rupees Four Hundred Sixty and No.
Providing European Type W/C's plastic seat with cover with brass Paise Sixty Six Only
hinges and rubber butters white vitreous china including
necessary fittings and as directed by Engineer in charge.
79 2500.00 Item No.79 3.95 Rupees Three and Paise Ninety Litre
Providing erecting and fixing double coated I.S.I. water tank of Five Only
required capacity each with all necessary fittings and connection
etc. complete on terrace.
80 21.00 Item No.80 1019.39 Rupees One Thousand Nineteen Smt
Providing and laying polished kota stone slab flooring over 20mm and Paise Thirty Nine Only
(average) thick base of cement mortar 1:6 (1cement : 6coarse
sand) or L.M. 1:1.5 laid over and jointed with grey cement slurry
including rubbing and polishing etc. complete.
341, S.D.3, B-1 Tender
81 8.00 Item No.81 606.95 Rupees Six Hundred Six and Paise Smt
Providing And fixing single layer water proof gypsum board Ninety Five Only
12.5mm thick sections using water proof board of size 1220 mmx
1830 mm x 8.0 mm suspended by GI suspender channel of size
mm x 3 mm with intermediate channel og size 18mm x 40 mm x
0.8 mm at 1220 mm center to center ceiling section of size 40 mm
x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of
size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops
including paper tap sand sofit cleat, anchor fastener, scoch bolt
connecting cleat, joining compound top coat on ceiling including
making necessary opening for light fitting, diffuser etc. comp. as
per detail drawing as directed.
82 30.00 Item No.82 343.52 Rupees Three Hundred Forty Smt
Providing and fixing 5mm thick frosted glass with all necessary Three and Paise Fifty Two Only
fittings and materials including labour cost as directed by
Engineer in charge.
Rupees Twenty Lakhs Eighty Eight Thousand Seven Hundred Eighty Two And Paise Sixty Four Only.
341, S.D.3, B-1 Tender
I/We am/are willing to carry out the work at __________________________________% above/below ___________ percent (should
be written in figures and words) above/ below the estimated rates mentioned above. Amount of my/ our tender work out as under.
Estimated Amount Estimated Amount
Put to tender Rs. 2088782.64 Put to tender Rs.
Deduct % below Rs. Add % above Rs.
Total Rs. Total Rs.
Note 1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which
no extra payment shall be made.
Note 2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
Note 3 GST and Income tax TDS will be deducted at a source while making payments of bills
Note 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design
the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in
all the tender.
341, S.D.3, B-1 Tender
CREDIT OF DISMENTAL MATERIALS
1 100.00 Item No.1 23.00 Rupees Twenty Three Only Kg.
2 48.00 Item No.2 41.76 Rupees Forty One and Paise Seventy Smt
3 5.00 Item No.3 681.20 Rupees Six Hundred Eighty One and No.
Door Shutter (Flush) Paise Twenty Only
4 20.00 Item No.4 341.00 Rupees Three Hundred Forty One No.
Window Shutter Only
5 20.00 Item No.5 512.00 Rupees Five Hundred Twelve Only No.
6 5.00 Item No.6 102.40 Rupees One Hundred Two and Paise No.
Ventilation Forty Only
7 72.00 Item No.7 20.25 Rupees Twenty and Paise Twenty Rmt
AC Rain Water Pipe Five Only
8 5.00 Item No.8 171.00 Rupees One Hundred Seventy One No.
9 20.00 Item No.9 60.00 Rupees Sixty Only No.
Bib Tap / Pillar Tap
TOTAL CREDIT OF DISMENTAL MATERIALS AMOUNT
Rupees Twenty Eight Thousand Seven Hundred Ninety Five And Paise Forty Eight Only.
Read Note : 4 [A] and [B] of Schedule 'B'.
Dated Signature of the Executive Engineer,
Contractor Capital Project Division No.1,
341, S.D.3, B-1 Tender
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Details about tender (NIT).pdf
02 SBD Form.pdf
03 Schedule B.pdf
04 Specification.pdf
06 Condition and GR.pdf
01 Building Works P. No.001 to 026.pdf
02 Building Works P. No.027 to 050.pdf
03 Building Works P. No.051 to 076.pdf
04 Building Works P. No.077 to 100.pdf
05 Building Works P. No.101 to 126.pdf
06 Building Works P. No.127 to 152.pdf
07 Building Works P. No.153 to 176.pdf
08 Building Works P. No.177 to 192.pdf
05 Material Testing Schedule - converted.pdf
07 Condition and GR_11zon.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .