Jal Jeevan Mission Phase-2-Pulamanthole -Electrification of new pump set, connected load enhancement of Cherukara CWP -General Electrical Work

Amount

Electrification Works and Contract Demand Enhancement

OD253794/2023-2024:Dismantling the existing HT TOD meter and Supply, conveyance and installation of new 3 pole 4 wire 11kV/110V, 5A, 0.2S accuracy class HT TOD meter in existing kiosk.

OD253795/2023-2024:Dismantling the existing test terminal block and Supply, conveyance and installation of new test terminal block in existing kiosk.

OD253796/2023-2024:Dismantling and unloading the Existing CT/PT unit by using chain block from the KSEB structure by mechanical and manual means.

OD253797/2023-2024:Supply, conveyance, loading using chain block and installation of out door type CT/PT unit specification of current transformers 3 nos -/5A, 10VA, CL: 0.2S and specification of potential transformer ratio:11kV/110V, 25VA, CL:0.2, work include erecting CT & PT unit on the existing KSEB structure.

OD253798/2023-2024:Supply & laying of 2.5 sq mm X 12 core Cu UG cable from CTPT to energy meter.

OD253799/2023-2024:Termination of above UG cable.

OD253800/2023-2024:Dismantling all the feeding connection cables of existing MSB Panel - both incoming Cable (4x400 sq.mm - from Transformer) and outgoing cables (3 Nos. 2x240 sq.mm - to 240HP, 240HP, 220HP motors. 1 No. 2x150 sq.mm - to 170HP motor. 1 No. 300 sq.mm - to 150HP motor. And 2 Nos. 185 sq.mm - to 100HP motors.).

OD253801/2023-2024:Dismantling and leading the Existing MSB panel by mechanical (using crane) and manual means and return to the godown without causing any damages by using crane.

OD253802/2023-2024:Dismantling and leading the Existing old SSB Panel by mechanical (using crane) and manual means, also dismantle all the feeding connection cables ( both incoming and outgoing cables) and return to the godown without causing any damages by using crane

OD253803/2023-2024:Supply, Providing, cutting suitable size and laying for covering the top of the Iron frame by using 5mm thick MS Chequered plate. and 2 coat of painting (1 coat of epoxy coating and 2nd coat of enamel coating) etc to cover MSB Platform.

OD253804/2023-2024:A).MAIN SWITCH BOARD - Supply, fabrication, installation of cubical panel board of dust and vermin tight proof, indoor, front opening type, cable bottom entry, mounted on M.S stand using nut and bolt suitable for operation on 3 Ph, 415V, 50 Hz AC system with busbars, including internal wiring with suitable size FRLSH wires/cable, interconnection as per technical specification. B).INCOMER 1600A 50kA 4 pole, Motorized Draw Out ACB - 1 No.(Microprocessor Based release)- having isolation duty with 3 Nos. O/C & 1 E/F releases, etc. C ).OUTGOING 630A 3 pole, Microprocessor type MCCB -5 Nos. having isolation duty with 3 Nos. O/C & 1 E/F releases, including rotary handle, spreader link extension etc D).250A 3 pole, Microprocessor type MCCB - 5 Nos. having isolation duty with 3 Nos. O/C & 1 E/F releases, including rotary handle, spreader link extension etc. E). 400A 3 pole, Microprocessor type MCCB - 2 Nos. having isolation duty with 3 Nos. O/C & 1 E/F releases, including rotary handle, spreader link extension etc. F). 1 set RYB indication lamps with control MCBs, 3 Nos. CT, digital multifunction meter measuring V-A-F and power factor with control MCBs on the incomer panel and on all the outgoing feeders. G).Supply and fitting Digital Earth fault relay of reputed make Having IS certification and Neutral CT 5P10. H).Supply, conveyance and fitting of 2x50x12 mm AL Busbar with suitable insulation.

OD253805/2023-2024:Supply, laying and end termination of 2Cx1.5 sq.mm Copper UG cable (for Earth fault relay, neutral CT).

OD253806/2023-2024:Supply and fitting Neutral CT Box with suitable supporting.

OD253807/2023-2024:Reconnecting of all the feeding connection cables both incoming Cable (4x400 sq.mm - from Transformer) and outgoing cables (3 Nos. 2x240 sq.mm - to 240HP, 240HP, 220HP motors. 1 No. 2x150 sq.mm - to 170HP motor. 1 No. 300 sq.mm - to 150HP motor. And 2 Nos. 185 sq.mm - to 100HP motors.) to MSB with suitable new glands and making good the damages, color washing etc, as required.

OD253808/2023-2024:Supply, conveyance and providing plate earthing minimum 3 nos. as per IS 3043 with 1200x1200x12 mm CI earth plate, including excavation and refilling with coal, salt etc. inclusive of all connected civil works.

OD253809/2023-2024:Supply following size of GI/Copper flats/wires for earthing of transformer, Panel board etc. and interconnection of earth pits as per technical specification. Earth strip/wires to be taken through GI pipes/cable trays/Hume pipes/built in trunches/soil etc. wherever necessary. Rate inclusive of connected civil works, necessary tinning, providing sockets and end termination of GI/copper strips/wires with all accessories required for the complete work. - 50X6 mm GI strip.

OD253810/2023-2024:Supply following size of GI/Copper flats/wires for earthing of transformer, Panel board etc. and interconnection of earth pits as per technical specification. Earth strip/wires to be taken through GI pipes/cable trays/Hume pipes/built in trunches/soil etc. wherever necessary. Rate inclusive of connected civil works, necessary tinning, providing sockets and end termination of GI/copper strips/wires with all accessories required for the complete work. - 25X3 mm Copper strip.

OD253811/2023-2024:Supply following size of GI/Copper flats/wires for earthing of transformer, Panel board etc. and interconnection of earth pits as per technical specification. Earth strip/wires to be taken through GI pipes/cable trays/Hume pipes/built in trunches/soil etc. wherever necessary. Rate inclusive of connected civil works, necessary tinning, providing sockets and end termination of GI/copper strips/wires with all accessories required for the complete work. - 25X6 mm Copper strip.

OD253812/2023-2024:Supply following size of GI/Copper flats/wires for earthing of transformer, Panel board etc. and interconnection of earth pits as per technical specification. Earth strip/wires to be taken through GI pipes/cable trays/Hume pipes/built in trunches/soil etc. wherever necessary. Rate inclusive of connected civil works, necessary tinning, providing sockets and end termination of GI/copper strips/wires with all accessories required for the complete work. - SWG 10 Copper Wire.

OD253813/2023-2024:Supply and providing First Aid Chart duly framed and placed in a location for clear vision.

OD253814/2023-2024:Supply and providing 6Kg, ABC Dry Chemical Powder type Fire Extinguisher with hose and clamps to wall as required.

OD253815/2023-2024:Supply and providing danger notice board of size 200x150 mm as directed by departmental officers.

OD253816/2023-2024:Supply and providing 11kV rubber hand long glove. (Pair)

OD253817/2023-2024:Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3kV dielectric strength near panel board.

OD253818/2023-2024:Painting letters or figures of the following sizes with enamel paint as identification marks, etc to panel board.

OD253819/2023-2024:Supply and providing 9 litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint FIRE, mounted on MS angle frame work/wall bracket filled with fine sand, painting the bracket/floor stand including making good the damages, colour washinig etc, as required.

OD253821/2023-2024:To and Fro Conveyance and testing fee for TOD meter, CT:PT unit at TMR division.

OD253822/2023-2024:Testing fee for Neutral CTs, Earth fault relays and Soil resistivity test, Scrutiny, Inspection fee etc. to be remitted to Electrical Inspectorate, at actuals / orginal chalan receipt shall be produced

Non Electrical Works

6.2.2:Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

100.98.1008:Engaging Coolie.

Cabling work fron MSB to SSB work at Cherukara Clear water Pump House at WTP Cherukara

OD254610/2023-2024:Supply, conveyance and laying of suitable XLPE insulated UG power cable of 1.1KV grade of 2Run x 3.5C x 240 Sq.MM from MSB to SSB through trench / wall / ceiling. (Make havells/ polycab/ Vguard / Gloster/ Equivalent).

OD254644/2023-2024:Termination of the above cable Lines using Brass Cable Gland and Copper Sockets.

OD254660/2023-2024:B SWITCH BOARD- Supply, fabrication, installation of cubical panel board of dust and vermin tight proof, indoor, front opening type, cable bottom entry, mounted on M.S stand using nut and bolt suitable for operation on 3 Ph, 415V, 50 Hz AC system with busbars, including internal wiring with suitable size FRLSH wires/cable, interconnection as per technical specification. INCOMER 630A 3 pole, MCCB -1 Nos. having isolation duty, including rotary handle, spreader link extension etc. 250A TPN SFU with suitable backup fuse -1 No. 200A TPN SFU with suitable backup fuse -5 No. 125A TPN SFU with suitable backup fuse -1No. 1 set RYB indication lamps with control MCBs, VAF meter with CT coil -1No. Supply, conveyance and fitting 630A 3.5 runs of colour coded and PVC insulated aluminium Bus Bar- 1set.

OD254666/2023-2024:Supply, laying, testing and commissioning of PVC 1.1kV grade XLPE insulated armoured Aluminium/Copper cables of the following sizes and laying in earth excavated trenches, trays, racks, risers, trusses, walls etc using heavy duty Aluminium Flat or heavy duty GI spacer saddles of which spacing of clamps not exceeding 50cm and pulling through pipes including all minor civil works. a) 3.5C x 95 sq.mm Al cable.

OD254876/2023-2024:Supply, laying, testing and commissioning of PVC 1.1kV grade XLPE insulated armoured Aluminium/Copper cables of the following sizes and laying in earth excavated trenches, trays, racks, risers, trusses, walls etc using heavy duty Aluminium Flat or heavy duty GI spacer saddles of which spacing of clamps not exceeding 50cm and pulling through pipes including all minor civil works. b) 3.5C x 70 sq.mm Al cable.

OD254877/2023-2024:Supply, laying, testing and commissioning of PVC 1.1kV grade XLPE insulated armoured Aluminium/Copper cables of the following sizes and laying in earth excavated trenches, trays, racks, risers, trusses, walls etc using heavy duty Aluminium Flat or heavy duty GI spacer saddles of which spacing of clamps not exceeding 50cm and pulling through pipes including all minor civil works. c) 3.5C x 50 sq.mm Al cable.

OD254884/2023-2024:Supply, laying, testing and commissioning of PVC 1.1kV grade XLPE insulated armoured Aluminium/Copper cables of the following sizes and laying in earth excavated trenches, trays, racks, risers, trusses, walls etc using heavy duty Aluminium Flat or heavy duty GI spacer saddles of which spacing of clamps not exceeding 50cm and pulling through pipes including all minor civil works. d) 3.5C x 35 sq.mm Al cable.

OD254917/2023-2024:GLANDING AND TERMINATION Termination of the following cable Lines using Brass Cable Gland and Copper Sockets. a) 3.5C x 95 Sq.mm Al. cable

OD254923/2023-2024:GLANDING AND TERMINATION Termination of the following cable Lines using Brass Cable Gland and Copper Sockets b) 3.5C x 70 Sq.mm Al. cable

OD254924/2023-2024:GLANDING AND TERMINATION Termination of the following cable Lines using Brass Cable Gland and Copper Sockets c) 3.5C x 50 Sq.mm Al. cable

OD254971/2023-2024:GLANDING AND TERMINATION Termination of the following cable Lines using Brass Cable Gland and Copper Sockets d) 3.5C x 35 Sq.mm Al. cable

OD254980/2023-2024:Supply of 25x3 mm Copper flats for earthing of SSB as per technical specification. Rate inclusive of connected civil works, necessary tinning, providing sockets and end termination of copper strips with all accessories required for the complete work.

OD254986/2023-2024:Supply, conveyance and fitting MS cable tray with suitable support, welding and 2 coat of painting (1 coat of epoxy coating and 2nd coating of enamel coating) for laying cables.

Documentation works for Raw water pump house and Water treatment plant

OD255273/2023-2024:Documentation works for 500 KVA Transformer and connected electrics at Raw water pump house at Kattuppara and Documentation works for 750 KVA Transformer and connected electrics at Water Treatment Plant at Cherukara All documentaion works including preparation of all authority standard drawings, submitting and getting approval from Electrical Inspectorate , submitting of completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate.(All statutory payments will be paid by KWA) Note: Existing HT drawing Not available) and All documentaion works including preparation of all authority standard drawings, submitting KSEB, obtaining contract demand, permanent power connection, etc.. (All statutory payments will be paid KWA)

JYOTHIBASU V

Bidder Name

ELECTROWIND ENGINEERING CO

JYOTHIBASU V