Constructing CR-VRB @ Ch. 45750 mt of Ukai Right Bank Main Canal and HR for Jitali Branch Canal.

Bill of Quantities

Name of Work Constructing CR-VRB @ Ch. 45750 mt of Ukai Right Bank Main Canal and HR for Jitali Branch

Qty. Description of Items. Rate Per Amount

Dismentalling the existing stone masonry including sorting out

2792.00 CM and stacking the useful material sand removing the debries and 757.40 CM

making good the damage etc. complete as directed.

Dismentalling the existing foundation concrete including

disposing the dismentalled stuff including sorting out and

238.00 M3 stacking the useful materials and removing the debries and 1310.80 M3

making good the damage etc. complete as directed.

(c) R.C.C for super structure.

Excavation for foundation in all sorts of soil including yellow,

sandy, gravelly soil, soft & hard murrum, etc. dry condition

9434.06 M3 including depositing the excavated stuff in uniform layers in 81.50 M3

banks or as directed etc. complete for lead uo to 1.0 Km and all

lifts. (By machinery) (a) Above water table.

Supplying of graded stone aggregates of following size (

For W.B.M. road) H.B.Stone aggregates (i) 40 mm to 63 262.48 m3

Spreading the stone aggregate for Roling and W.B.M.

including filling the interstices forming the surface to

rrquired camber & gradient (excluding spreading of

Blindage) (ii) 40 mm to 63 mm size aggregates (H.B)

Providing and laying plain / reinforced cement concrete

lining of M-15 grade in bed, side slopes and curvature

including batching, mixing, transporting placing, smooth

finishing, curing including dewatering where required.

( machinary based without Paver).

701.00 m2 (C) 15 cm thick lining in Bed & slope 659.40 m2

Providing and laying plain/ reinforced Nominal Mix cement

concrete of various grade with cement, sand and coarse

aggregates including centering, shuttering, batching, mixing,

transporting, placing, vibrating, smooth finishing, curingetc.

completeforall lead and lift.(Manually With Conventional

Mixer, Excluding dewatering)

Providing and laying plain/ reinforced Design Mix cement

concrete of various grade with cement, sand and coarse

aggregates including centering, shuttering, batching, mixing,

transporting, placing, vibrating, smooth finishing, curing etc.

complete for all lead and lift.(Baching Plant Based, Including

(B) Piers, abutment, wingwalls, headwall, returnwall etc

(C) Raft, Bottom slab of barel, footing of columns,piers,

abutment and bottom slab of sump etc.

(D)Raft, Bottom slab of barel, footing of columns,piers,

abutment and bottom slab of sump etc.

(E)Roadway slab, approch salb, chute floor slab,kerb, pier

cap, abutment cap, hoisting platform,top slab of barrel etc.

Providing and placing in position reinforcement bars including

430.89 Qtl cutting, bending welding, joints where necessary, hooking etc. 7194.00 Qtl

complete as per drawing for all lead and lifts. (A) TMT

Providing and fixing in position pre moulded asphalt or bitumin

cork board of approved quality and specification as per design

178.00 SqMt 1007.40 SqMt

and drawing as directed. (D) 12mm

Providing and fixing in position PVC heavy duty water stops in

barrels, trough, and wing wall with 25 mm wide expension

119.20 m joint as shown in drawing including filling the joints with 384.90 m

asphalt pad or bitumins or cork board of approved quality. (A)

225mm wide PVC water stop.

Providing and filling the polysulphide joint selent of the

211.90 m approved make in the expansion and contraction joints in the 533.00 m

c.c. lining including clearing the joints with air water jet

Earthwork in embankment using soil, soft & hard murrum

excavated from approved borrow area/village tanks

5661.00 M3 etc.including breaking clods, dressing to the design 118.10 M3

section with lead up to 5.0 kilometer and all lifts.

(By Poclane machinary)

Providing and fixing in position 110 mm dia PVC pipe weep

4.00 Rmt 263.70 Rmt

holes in abutment, wing wall, and laying training etc. complete

Providing & fixing in position sign board of standard size of

1.20mx0.90m with M.S angle 40mmx40mmx6mm with 3mm

1.00 No. thick iron plate including fixing in 1:5:10 prop. Concrete block 3011.30 No.

size 40cmx40cmx75 cm including painting existing data on the

board etc. complete as directed.

Providing and laying dry rubble pitching of various thickness to

required grade including trimming of earth work , hand packing

78.84 Sqmt 455.50 Sqmt

the interstices with spauls, filling earth in interstices panneling

complete for all leads and lifts (a) 300mm thick.

Providing gauge plate of following size of material fibre glass

reinforced plastic with engraved bands width and figures with

9.00 No. necessary clits and fasteners and fixing the same at the site of 14786.61 No.

work etc complete asdirected

For 0.60 mt. x 1.0 mt. gauge patti

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape

1159.82 sqmt even shade after thoroughly brushing the surface to 120.26 sqmt

remove all dirt, and remains of loose powdered

materials.etc complete

Providing videography on the ocassion of function or for

ongoing construction work including dubbing, titeling etc.

complete including cost of cassette/CD (b) Up to 4.00 hours

Providing, Fabricating & erecting of new embedded parts like

wall plate assemblies, sill beam etc. complete including

Labour, Tools & tackles, Scaffoldings, Safety equipment etc as

1 Gate per drawing, Specification & Instruction of Engineer In charge 120905.00 Gate

for C.R. radial Gate (Size : 3.65 Mtr. X 2.00 Meter - 1 Nos.) as

per drawing, specification and instruction of engineer incharge

at chainage 45750 Meter of Ukai Right Bank Main Canal

Providing, Fabricating & erecting of new gateleaf assembly

including Labour, Tools & tackles, Scaffoldings, Safety

equipment etc as per drawing, Specification & Instruction of

1 Gate Engineer In charge for C.R. radial Gate (Size : 3.65 Mtr. X 2.00 340100.00 Gate

Meter - 1 Nos.) as per drawing, specification and instruction of

engineer incharge at chainage 45750 Meter of Ukai Right Bank

Providing, Fabricating & Erecting of new arm assembliy,

Trunnion assembly, Anchor Girder etc. complete including

Labour, Tools & tackles, Scaffoldings, Safety equipment etc as

2 Set per drawing, Specification & Instruction of Engineer In charge 150058.00 Set

for C.R. radial Gate (Size : 3.65 Mtr. X 2.00 Meter - 1 Nos.) as

per drawing, specification and instruction of engineer incharge

at chainage 45750 Meter of Ukai Right Bank Main Canal

Providing, Fabricating & erecting of new hoist platform

assembly including Labour, Tools & tackles, Scaffoldings, Safety

equipment etc as per drawing, Specification & Instruction of

1 Gate Engineer In chargefor C.R. radial Gate (Size : 3.65 Mtr. X 2.00 217498.00 Gate

Meter - 1 Nos.) as per drawing, specification and instruction of

engineer incharge at chainage 45750 Meter of Ukai Right Bank

Manufacturing, Providing & Erecting of new 2 T Capacity rope

drum type hoist including Labour, Tools & tackles, Scaffoldings,

Safety equipment etc as per drawing, Specification &

1 Gate Instruction of Engineer In charge for C.R. radial Gate (Size : 3.65 169911.00 Gate

Mtr. X 2.00 Meter - 1 Nos.) as per drawing, specification and

instruction of engineer incharge at chainage 45750 Meter of

Ukai Right Bank Main Canal

Providing, Fabricating & erecting of new embedded parts like

wall plate assemblies, sill beam etc. complete including

Labour, Tools & tackles, Scaffoldings, Safety equipment etc as

1 Gate per drawing, Specification & Instruction of Engineer In charge 117445.00 Gate

for C.R. radial Gate (Size:3.05 Mtr. X 1.50 Mtr.- 1 Nos. ) as per

drawing, specification and instruction of engineer incharge at

chainage 45750 Meter of Ukai Right Bank Main Canal

Providing, Fabricating & erecting of new gateleaf assembly

including Labour, Tools & tackles, Scaffoldings, Safety

equipment etc as per drawing, Specification & Instruction of

1 gate Engineer In charge for C.R. radial Gate (Size:3.05 Mtr. X 1.50 244898.00 gate

Mtr.- 1 Nos. ) as per drawing, specification and instruction of

engineer incharge at chainage 45750 Meter of Ukai Right Bank

Providing, Fabricating & Erecting of new arm assembliy,

Trunnion assembly, Anchor Girder etc. complete including

Labour, Tools & tackles, Scaffoldings, Safety equipment etc as

2 set per drawing, Specification & Instruction of Engineer In charge 150058.00 set

for C.R. radial Gate (Size:3.05 Mtr. X 1.50 Mtr.- 1 Nos. ) as per

drawing, specification and instruction of engineer incharge at

chainage 45750 Meter of Ukai Right Bank Main Canal

Providing, Fabricating & erecting of new hoist platform

assembly including Labour, Tools & tackles, Scaffoldings, Safety

equipment etc as per drawing, Specification & Instruction of

1 Gate Engineer In chargefor C.R. radial Gate (Size:3.05 Mtr. X 1.50 197194.00 Gate

Mtr.- 1 Nos. ) as per drawing, specification and instruction of

engineer incharge at chainage 45750 Meter of Ukai Right Bank

Manufacturing, Providing & Erecting of new 2 T Capacity rope

drum type hoist including Labour, Tools & tackles, Scaffoldings,

Safety equipment etc as per drawing, Specification &

1 Gate Instruction of Engineer In charge for C.R. radial Gate (Size:3.05 167680.00 Gate

Mtr. X 1.50 Mtr.- 1 Nos. ) as per drawing, specification and

instruction of engineer incharge at chainage 45750 Meter of

Ukai Right Bank Main Canal

In word’s two crore thirty seven lakh eighty eight thousand eight hundred seventy seven rupees and

fourty three paise only

Deputy Executive Engineer Executive Engineer

Ankleshwar Canal Sub Division U.R.B.C. Inv. Division

Ankleshwar Ankleshwar