Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹1.5 L
Closing Date
10 Aug 2026, 12:00 pm
Superintending Engineer, Sujalam Sufalam Circle-1, Gandhinagar
Supplying and Providing Spare Parts for Pumps & motor at Matpur and Kalyana Pumping Station included in Patan Dindrol Pipeline Project. (With Buyback)
325590
05 of 2026 – 2027
Open
Pumps/Motors
Works
Gandhinagar
9 documents required · 9 mandatory
₹3,600
Executive Engineer Drainage Division Gandhinagar
₹1.5 L
18 Jul 2026
18 Jul 2026
18 Jul 2026
10 Aug 2026
18 Jul 2026
Item estimated but Total Amount according to
Item of work Unit
No. may be more or estimated quantities
less In Figures Rs.
Providing Spares for Horizontal split Pump Make: JYOTI,Size : 500 HS, Serial
N30884, STYLE : 1P419-014B, RMP-960, L.P.M. 57000, Head - 49 m with buy
back sat Kalyana Pumping Station for patan-dindrol Pipeline Project. Shaft 230541.00 No.
1b 1.00 Pump Shaft 609300.00 No.
1c 2.00 Pump Neck Ring 218344.00 No.
1d 2.00 Pump Bush 206048.00 No.
1e 2.00 ImpellerNeck Ring 234340.00 No.
1f 2.00 Pump Bering 122244.00 No.
Providing Spares for Pump Motor Make: JYOTI,626 KW, Serial NO. 136036, STYLE No.
: 1M192-102, RMP-990 with buy back at Kalyana Pumping Station for patan-dindrol
Pipeline Project.Work for VPI Rewinding of stator with (Global VPI resin poor system
Work for supply of new shaft (for motor rotor) as per original and insertion of new No.
shaft also rebarring / recagging of the rotor.
2c 1.00 Charges for dynamic balancing of the rotor 84456.00 No.
2d 1.00 Charges for restaggering of the stator core 658260.00 No.
2e 1.00 Charges for bushing on DE side bearing housing 95013.00 No.
2f 1.00 Supply of new bearing NU-326-M/C3 59989.00 No.
2g 1.00 Supply of new bearing NU-324/MC3 52412.00 No.
2h 1.00 Supply of new bearing 8324MC3 69304.00 No.
2i 1.00 Supply and fixing of new bearing housing (insulated) for NDE side 235980.00 No.
2j 1.00 Supply of cooling fan 93150.00 No.
2k 1.00 Shaft metalizing and machining at DE and NDE side bearing seating area. 206172.00 No.
Providing & Supply Battery Charger with battery set with buy back at Kalyana & No.
Matpur Pumping station under Patan-Dindrol Pipeline Project .Battery charger Type :
Flot cum boost charger with DCDB Rating : Floot: 125V/32A, Boost :152/40A
Providing, Supplying and installation of 200 AH, 110V DC (2V each x 55 Nos Cell), Set
Battery Set with Buy Back of old Battery Set at Kalyan & Matpur pumping station
including necessary testing, supervised installation, commissioning, at village Kalyana
& Matpur of Patan-Dindrol Pipeline Project.
Rewinding of 3000 KVA Kirloskar make 11 KV/3.3KV HT Tranformer with buy back Job
at Matpur Pumping station under Patan-Dindrol Pipeline Project .a.Labour Charges for
windings, takeing out top yoke of core & windings of all 3 phase, washing of core with
hot oil, reassmbling of new HV & LV windings with new insulations, top yoke fillings
& LV side brazing, tightening of insulation packing, windows & core bolts, HV tap
leads brazing & connecting to OLTC, Low voltage testing before drying out, dry out of
core & windings assembly in Oven, Cleaning & painting of tank from inside & outside,
Tanking of core & winding assembly, Filling of filtered NEW oil in the tank,
4 1.00 Overhauling of OLTC, Assembly of all New accessories & fittings, Testing for 3897396.00
all routine tests as per IS 2026, To & Fro transportation will be to OUR account.,
Loading & Unloading @ your site will be arrange by you.b) Replacement of
following spares like New Copper for HV & LV windings with new Insulation, Oil
Level Gauge, Insulation Materials & Gasket, HV metal Parts, LV metal parts,
PRV in place of Explosion Vent, Transformer OilSilica Gel Breather Hardware
Gaskets , Paints , Oil seal etc.
Providing & Supply Jyoti make VT pump ( Sr No- N30966) spars with buy back at No.
5a 1.00 Matpur Pumping station under Patan-Dindrol Pipeline Project .Top shaft with sleeve- 434700.00
5b 2.00 Line shaft no-1 with sleeve- 142830.00 No.
5c 1.00 Line shaft no-2 with sleeve 142830.00 No.
5d 1.00 Impeller shaft with sleeve 465750.00 No.
5e 1.00 Impeller shaft sleeve 176985.00 No.
5f 2.00 Impeller wear ring ( DE+NDE) 105570.00 No.
5g 4.00 Bering Housing for thordon bearing 81227.00 No.
5h 4.00 Muff coupling 56884.00 No.
5i 2.00 Bering (DE+NDE) 206612.00 No.
I/We am/are willing to carry out the work at …………….. % above/below percent (Should be written in figure
and words.) of estimated rates mentioned above. Amount of my/our tender works as under.
Item estimated but Total Amount according to
Item estimated but Total Amount according to
Item of work Unit
No. may be more or estimated quantities
less In Figures Rs.
*Estimated Amount Put *Estimated Amount Put
To Tender. Rs. 14734875.00 To Tender. Rs.
Net Rs………………………………. Add …………% Above Rs………………
Net Rs…………………..
In Words… In Words …
*please strikeout whichever is not applicable.
Note:1 All the works shall be carried out as per Public Works Department hand book and other
specification of division or as directed.
Note: 2, all the columns in schedule should be filled and the total of entries in last column should
be struked by the contractor under his signature.
Note: 3, Rates quotes includes clearance of sites ( prior commencement of work and at its close)
in all respect and hold good work under all conditions, site moisture, weather etc.
Deputy Executive Engineer Executive Engineer
Dated signature of
Contractor Drainage division Drainage division
Visnagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. NIT- Supplying and Providing Spare Parts.pdf
02.Final SBD Matpur and Kalyana Pump Repair.pdf
04. Schedule-B.pdf
notice no 05 of 2026 2027.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].