Renovation of Heritage Library at Almora

Amount

Earth work in excavation by mechanical / manual means in foundation trenches or drains i/c lift upto 1.5 m, i/c disposal of surplus excavated soil within a lead of 50 m.

P/L in position CC 1:4:8 (1 Cement : 4 c/sand : 8 st. agg. 40 mm size) excluding the cost of c/shuttering - All work upto plinth level.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 c/sand).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases

Centering and shuttering i/c strutting propping etc and removel of form for lintels beams plinth beams girders bresssumers and cantilevers.

Reinforcement for R.C.C work i/c straightening cutting bending placing in position and binding all complete- Thermo Machanically treated bars.

Brick work with FPS bricks bricks of class desigation 75 in super structure above plinth level upto floor v level in cement mortar 1:6

12 mm cement plaster of mix 1:6 cement and coarce sand mortar

Filling available excavated earth in trenches, plinth in layers consolidating by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size etc complete.

P/F glass strips in joints of terrazo- 40 mm wide and 4 mm th.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Sal wood

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, i/c cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete.

P/L in position CC 1:2:4 in bed blocks etc excluding te cost c/shuttering uoto floor five level

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (i) Single socketed pipes.110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips of approved design to unplas-ticised - PVC rain water pipes by 110 mm (Bend)

Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :4.0 mm thick glass panes

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :Second class deodar wood

Distempering with oil bound washable distemper of app brand( two or more coats) to given an even shade on new work over and i/c priming coat with cement primer.

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort), in cement mortar 1:6 (1 cement :6 coarse sand)

Painting wood work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.

Painting Steel work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.(125.80-50.70=75.10)

P/F ISI marked alluminium sliding door bolts anodi coating not less thengrade AC 10 as per IS:1868 transperent or colour or shade with nuts and screw etc complete300x16

P/F ISI marked alluminium tower bolt anodised (a not less then grade AC 10 as per IS:1868) transperent or colour or shade with nuts and screw etc complete250x10

P/F ISI marked alluminium Handles anodised (a not less then grade AC 10 :125 mm

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness

P/F M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60mm thick M.S. Sheet, and applying a priming coat of approved steel primers.

providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS: standards and weighing not less than 810 gms. 15mm nominal bore.

providing and fixing C.P. brass angle valve for basin mixer and geyser points of appoved quality conforming to IS: 8931 15mm nominal bore.

providing and fixing PTMT grating of approved quality and colour Circular type 100mm nominal dia.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern

providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. flexible pipe 32mm dia.

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and laying Ceramic glazed floor tiles of size 300x300 mm laid on 20 mm thick cement mortar 1:4

Providing and fixing Ist quality ceramic glazed wall tiles over 12 mm thick bed of cement mortar 1:3

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams Ridges plain (500 - 600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams Gutter (600 mm over all girth)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 gramsFlashings/ Aprons.( Upto 600 mm)

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I)Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mmExtruded section profile size 48x40 mm

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)Flush/ Ruled pointing

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc 15 mm dia nominal bore

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size :Rectangular shape 1500x450 mm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, size 595x595 mm, and 0.5 mm thick with 8 mm drop

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer)in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand)Size of Tile 600x600 mm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Excavation in hilly area in soil by manual means i/c cutting and timbering of side slopes and disposing of excavated earth with a lift upto 1.5 m

Excavation in foundation for retaining & breast walls in all types of soils and rocks i/c lead, lift and disposal of surplus material.

RR stone masonary laid in 1:6 cement and sand mortar in breast, retaining walls etc. i/c supply of all materials, labour, T&P and royalties etc.

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls,etc. including supply of all material, labour, T&P and royaltiies etc.

P/L of dry rubble stone flooring complete as directed by Engr. - in - charge.