REPAIR REPLACEMENT OF FLOORING DADO PLINTH PROTECTION AND CERTAIN MISC B R WORK AT DAD MD AND OTM ACCN AT RAMGARH CANTT UNDER GE RAMGARH

Amount

Taking down cement plaster on brick wall or concrete surface etc.including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M & L brick work with sub class B old size bricks straight on curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge .

M & L for rendering 15mm thick on fair faces of brickwork or concrete surface work in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and as directed.

M & L for rendering 15mm thick on concrete surface work in cement mortar (1:4) finishing even and smooth without using extra cement, complete all as specified and as directed.

M & L 5 mm thick rendering on or concrete surfaces as in ceiling, with cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed.

M & L preparation of newly plastered surface of ceiling and applying three coats of white wash on the surface, complete all as specified and directed.

M & L for for completely removal of existing treatment of old wall surface and washing, rubbing down and stopping of distempered surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed.

M & L for preparation of old surfaces of walls and applying two coats cement base paint over a coat of alkali resistant primer of wall, complete all as specified and directed.

M & L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered surface and applying one coats of distemper oil emulsion , complete all as specified and directed.

M & L, for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper, complete all as specified and as directed.

M & L for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

All as per item No. 13 here-in-before but in ceiling.

Material and labour for one coat of synthetic enamel paint to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and directed.

M & L for preparation of old treated surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular )area of each tile exe.0.06 sqm but n.exe.0.11 sqm , in floors joint free tiles etc., including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed with white or coloured cement to match the existing surfaces, complete all as specified and directed.

M & L joint free, Non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular )area of each tile exe.0.11 sqm but n.exe.0.18 sqm , in floors joint free tiles etc including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed with white or coloured cement to match the existing surfaces, complete all as specified and directed.

M & L joint free, Non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular )area of each tile exe.0.11 sqm but n.exe.0.18 sqm , as in skirting, dado, etc. etc including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed with white or coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for 9-10 mm thick light colored vitrified ceramic tiles of size as in floor, n.exc 0.36 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.

All as per item No. 21 here-in-before but in skiring with 10mm thick rendering in cement mortar (1:3)

M & L for glazed ceramic coloured tiles 300x200X 6 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10mm thick with cement mortar (1:4) on fair faces of brick work to received tiles in vertical, complete all as specified and directed.

M & L for glazed ceramic coloured tiles 375x300X 7/450x300x7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10mm thick with cement mortar (1:3) on fair faces of brick work to received tiles in vertical, complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves and plate form, etc,complete all as directed by Engr-in-Charge

M & L for RCC as in kitchen platform, shelves type B0 (1:2:4) using 12.5mm graded stone aggregate, including necessary formwork, complete all as specified and as directed.

S & F mild steel deformed bars 8 to10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia quality conforming to Fe-410-S or F-410-0, or securing with clips, complete all as specified and directed.

M & L granite (of any type) work (table rubbed and polished) of any shade 18 to 20 mm thick in cooking platform, steps, window/cills, etc., over and including 15mm thick cement screed base in cement mortar (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab whete directed, complete all as specified and as directed.

Labour for grinding and polishing of existing Kota Stone/Terrazzo flooring, etc., complete all as directed by Engr-in-Charge.

S & F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.

S & F in repair vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete all as specified and directed.

S & F in repairs 10 litres capacity PVC low level flushing cistern including flush pipe, float valve, siphon etc, including 32 mm dia PVC flush pipe of required length, including two Nos. PVC brackets, complete with all fittings complete all as specified and directed by Engineer-in-charge.

S & F vitreous China wash basin, white, flat back, size 580X450mm including brackets for fixing, 32mm waste coupling, waste pipe etc complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make.

S & F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe, complete all as specified and directed.

S & F in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.

Taking up and down 15 mm dia steel tubing and connected fitings etc all as directed.

Taking up and down 20 mm dia steel tubing and connected fitings etc all as directed.

S & F 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc, complete all as specified and directed.

S & F 20 mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc, complete all as specified and directed.

Refixing old galvanised steel tubes and connection on wall 15mm bore, complete all as specified and as directed.

Refixing old galvanised steel tubes and connection on wall 20mm bore, complete all as specified and as directed.

S & F in repair angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repair two way angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repair stop cock of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repair 15mm dia central hole basin mixer with U shaped round crater spout with 450 mm long braided hoses (hot & cold), complete all as specified and as directed.

S & F 15 mm bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or for brass ferrule and fixed in repair.

S & F PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minimum weight 210 gms), complete all as directed.

Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc., for capacity of tank exc. 500 litres but not exc 1000 litres, complete all as specified and as directed.

M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades,shelves, lintel,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm, complete all as specified and as directed.

S & F in repair 15mm dia brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S & F in repair for PVC connection pipe of 15 mm dia and 45cm long to WHB and flushing cistern, complete all as specified and as directed.

S & F in repair brass chromium plated shower rose 125 mm size fancy type with or without swivels joints fixed to iron pipe etc., complete all as specified and as directed.

S & F in repair flush pipe of polyethylene of low or high density or PVC of 32 mm dia, for low level flushing cistern, complete all as specified and as directed.

S & F in repair PVC seat cover suitable for EWC any colour, complete all as directed.

S & F in repairs 32mm dia waste coupling of PTMT (half or full threaded), complete all as specified and directed.

S & F in repair for gun metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.

S & F in repair for gun metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

All as per item No. 61, here-in-before but exc but n.exc 1.00 Sqm each but n.exc. 4 Sqm,

Taking down shutters of any description n.exc 1.00 Sqm each, complete all as specified and directed by Engr-In-Charge .

All as per item No. 63, here-in-before but exc but n.exc 1.00 Sqm each but n.exc. 2 Sqm,

Refixing of shutter of any description exc. 1 Sqm and n.exc 2 Sqm, in the same opening, complete all as directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and as directed.

M & L Chowkhat 2nd class hard wood and frames wrought, framed rebated on the solid rounded or chamfered , put together with glue pinned at joints complete all as specified and directed by Engr-In-Charge

M & L for hold fast; wall ties; hooks for hanging fans; plan angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165, complete all as directed.

M & L PCC 1:3:6, type C-1 (using 20mm graded aggregate) for bed block for fillings for hold fasts etc., complete all as specified and as directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side either decorative face veneer both face with lipping/frame, complete all as per specified and directed.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. fitted to chowkhats for doors etc., complete size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed. Sample of shutter can be seen in GE's office.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. fitted to chowkhats for windows, ventilators etc. complete size of the members of shutter as specified in clause No. 8.24 (b) of MES schedule 2009, part – I (Specifications) as in window shutters complete all as specified and directed.

M & L in repair 12 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination fixed in aluminium shutter/partition, complete all as specified and directed by Engr-In-Charge .

S & F in repair block boards 18/19 mm thick grade 2 quality, commercial type for cupboard, shutter, shelf etc., fitted with screws, complete all as specified and as directed.

S & F for Steel window with side hung shutter including box type hinge with steel handle, and steel peg stay complete with glazing bars dovetailed or welded, 3mm, complete all as specified and directed.

S & F for Steel window with side hung shutter including box type hinge with steel handle, and steel peg stay complete without glazing bars dovetailed or welded, 3mm, complete all as specified and directed.

S & F steel window, ventilators, fixed type with glazing bars, complete all as specified and as directed.

S & F framed work as in doors or gates of angle or other section with gusset plates complete doors etc., to be prepared to hanging or sliding with and including eitther hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and as directed.

S & F 1.00mm thick mild steel plain black sheet in covering to door chowkhat (frames) cut to size beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed by Engr-In-Charge .

S & F framed work such as grill grating etc with end of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors and similar works conforming to Fe-410-0 or Fe 310-0 including all necessary welding complete all as specified and directed by Engr-In-Charge.

S & F galvanised wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples on wooden fillets and beads, complete all as specified and directed by Engr-In-Charge .

S & F in repair galvanised wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples on wooden fillets and beads, complete all as specified and directed by Engr-In-Charge .

Hacking out old broken glass ( any thickness ,size quality or description) from old wooden frames/steel frames , glazing with oil putty or fixed with beads, complete all as specified and as directed.

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

M & L for 3mm thick frosted plain sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fix 125mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F anodised aluminium handles 125 mm long, extruded section and fixed, complete all as specified and directed by Engr-In-Charge.

S & F 100mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge .

S & F 75 mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge.

S & F 100mm hasp and staple safety type aluminium anodised stove enamelled black including bolt to hinge plate and fixed with screw, compelte all as specified and as directed.

S & F second class hard wood small items such as brackets n.exc 200 cu.cm, latch and hinge blocks, shaped door and window stops and the like inclduing all necessary labours articles n exc 200 cu cm each complete all as specified and directed by Engr-In-Charge .

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn spring, fixed in floor, complete all as specified and as directed.

S & F mild steel sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge .

S & F MS ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete, complete all as specified and directed by Engineer -In-Charge.

M & L painting on new wooden based surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .

M & L painting on new steel surfaces of any description not otherwise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge.

S & F PVC coated, curtain rod 20 mm dia fancy type with fixing bracket etc., complete all as spefied and as directed.

S & F fancy type sofia bracket for curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and as directed.

S & F in repair Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.

M & L for taking down old steel window projecting type by mechanical cutter and fixed in the same opening by providing box type hinges 02 Nos in each shutter n.exc 1.00 Sqm and making good and painting to disturbed surface, complete all as specified and directed by Engr-In-Charge .

Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm, complete all as directed.

S & F piano hinges mild steel bright finish 30mm flap, complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer -In-Charge.

S & F in repair MS ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete, complete all as specified and directed by Engineer -In-Charge.

Supply and fix soap dish, chromium plated, any type, fixed to plugs with chromium plated brass screws in repairs complete all as specified and directed

Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long as in repairs complete all as specified and directed

S & F CP towel rail, 20mm dia, D type, 60cm long, complete all as approved by Engr-in-charge.

S & F in repair in repair towel ring of CP fixed with and including chromium plated brass and wooden/plastic cleats (minimum weight 90 gms), complete all as specified and as directed.

Suply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantilever brackets connecting union overall size 915 X 460 mm with bowl size 410 X 352 X 178 mm or 405 X 355 X 178 mm complete all as specified and directed.(Make: model No-BSSBSD-52 of Blue Star or equivalent Prayag polymer pvt ltd / Nirali) or equivalent make as approved.

S & F for snack guard of size 35 mm x 5 mm thick fixed with door shutter with nails/screw, complete all as specified and as directed.

S & F of CP health faucet with 1mtr tube and hook, complete all as specified and directed.

S & F in repair for handle of steel window left/right fixing with nut bolt etc., complete all as specified and as directed.

S & F in repair for peg stay for steel window left/right fixing with nut bolt etc., complete all as specified and as directed by Engr-in-Charge.

Supply only wooden beads of size n.exc 3 Sqcm of teak wood square/triangular in cross section, plain or design for fixing of mosquito net jali, complete all as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors & paving n.exc 15cm thickness (below or above ground level) complete all as directed by Engr-in-Charge

M & L for PCC (1:4:8) type D2 40mm graded stone aggregate as in sub base, etc., complete all as specified.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring, finish even and smooth using extra cement, complete all as specified and as directed.

Supply only 38mm wide glass dividing strip, 3mm thick, complete all as directed.

S & F in repair, 110mm bore PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by Engineer-in-charge.

S & F in repair, 110mm bore PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and as directed by Engineer-in-charge.

S & F in repair PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F in repair PVC (SWR) bends for 110 mm pipe, with rubber ring joints, complete all as specified and as directed.

S & F in repair PVC (SWR) bends for 75 mm pipe, with rubber ring joints, complete all as specified and as directed.

S & F in repair PVC (SWR) 110 mm bore junction singel, (Single T) equal or unequal, complete all as specified and as directed.

S & F in repair 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F in repair 75 mm bore PVC(SWR) floor trap, with grating including jointing with solvent cement, complete all as specified and directed.

ganpati enterprises

Modernage Constructions Pvt. Ltd.

M/s Ray construction

Paras Nath Singh

M/s friend enterprises

upadhyay engineers and consultant

M/s Shubham Constructions Co.