PROVISION OF DEFICIENT WASHROOMS NEAR HADR GROUND AT INS SATAVAHANA, VISAKHAPATNAM

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, base of columns, sides and soffits of plinth beams, sides of pile caps and similar work for rough finished surface of concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-30 (design Mix), using 20 mm graded stone aggregate) in foundation including rafts ,footing ,foundation beams , plinth beams, bases for columns etc, pile and mass, complete all as specified and directed.

Use and waste form work to sides pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete complete all as specified and as directed.

M&L for RCC M-30 (design Mix) using 20 mm graded stone aggregate) for columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves ,plinth beam including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc.complete all as specified and directed

Use and waste of form work to soffits of suspended slabs such as roof slabs, n. exc. 20cm thick (horizontal or sloping for fair finished concrete surface complete all as specified and directed.

M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like etc complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide flat fair finished surface complete all as specified and directed.

S & F high strength corrosion resistant TMT bars of grade Fe 500D 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F high strength corrosion resistant TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks made out of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) ,Grade 'C' masonry with compressive strength of 5N/sqmm, exc. 10 cm in width and setting in cemet mortar 1:6 complete complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance exc. 1.50 Km but n.exc. 5.00 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed.

M & L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M & L for Vitrified dark shed coloured tiles of size 1200x600x10 mm thick, as in vertical surfaces such as in floor etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, ceramic, coloured tiles of size 1200x600x10 mm thick , as in vertical surfaces such as skirting/dado etc, including 10 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:6 & cutting, polishing complete all as specified and directed.

M & L for granite stone slab (of any type) work (table rubbed and polished) as in vertical surfaces such as skirting/dado etc, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). (Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

S&F 12 mm thick toughned frosted glass invisible from either sides as in wall partitions and doors, fixed with stainless steel bracket or other accessories including all rubber packing/gascut / beading and all necessary Stainless steel fittings to wall to glass or glass to glass and fixing of two nos 300mm size "D" type stainless steel handle for closing of doors from in side and out side complete all as specified and directed

S&F 300 mm long stainless steel 'D' type handle complete all as specified and directed

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F for heavy duty stainless steel vertical locking arrangement for glass door complete all as specified and directed

Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed.

S & F 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, complete all as specified and as directed.

S & F 25 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, complete all as specified and as directed.

S & F 1000 litres capacity rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long, 25 mm dia tank nipple ,hoisted and fixed in position complete all as specified and directed.

S&F 50 mm bore, ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 1240 grams, screwed for iron pipe and fixed complete all as specified and as directed.

S & F 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed.

M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed

M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3 finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

Supply only Integral waterproofing compound complete all as specified and directed.

Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:- (a) Preparing and cleaning of fully dry surfaces as per IS3067-1966 (b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface. (c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane.

S & F vitreous china, single piece tankless wall hung WC with Sensor Flush, size 360x580x380mm, with UF soft close slim seat cover, hinges, fixing accessories, Accessories set, P Trap-180mm complete set and all fittings and fixtures including connection to outgoing drain including making good damaged/ disturbed surfaces complete all as specified and directed. Make: Jaquar Cat No. OPS-WHT-15961BIUFSMTL or equivelant model of make as per list of manufacturer mentioned in PS.

S & F in repairs, 15mm bore, two way bib cock with wall flange cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No.LYR-38041 or equivelant model of make as per list of manufacturer mentioned in PS.

S&F 15 mm bore fancy type chromium plated angular stop cock with wall flange complete all as specified and directed . Make: Jaquar Cat No. LYR-38053 or equivelant of make as per List of manufacturer's mentioned in PS.

S&F 450 mm long braided hose pipe with two 15mm nuts & rubber washers complete all as specified and directed. Make: CAT No. ALD-805B of JAQUAR or its equivelant model of make as per list of manufacturer

S&F Hand shower (Health faucet), with 8mm dia, 1.2m long flexible tube & wall hook with NRV (Back flow preventer), Chromium plated complete all as specified and directed. Make: CAT No. ALD-577 of JAQUAR or its equivelant model of make as per list of manufacturer

S&F Toilet paper holder with with flap recessed type, chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No. ACN-1153S or equivelant of make as per List of manufacturer's mentioned in PS.

S&F exposed shower pipe with provision for simultaneous working of showers with operating diverter knob, flat shape 1071x50x15mm & 350mm wide with sliding holder for hand shower, wall bracket & 8mm dia, 0.50 Mtrs long fexible tube (for connecting to exposed shower mixer ) without shower Make: Cat Part No SHA-1217F of JAQUAR complete all as specified and directed.

S & F fancy type chromium plated towel ring square with round flange complete all as specified and directed . Make: Jaquar Cat No. ACN-1121N or equivelant of make as per List of manufacturer's mentioned in PS.

S&F single towel rail 600mm long,stainless steel complete all as specified and directed. Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per List of manufacturer's

S&F soap dish holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Cat No. ACN-1131N of Jaquar or its equivelant model of make as per list of manufacturer

S&F click clack waste coupling 32 mm size full thread with 80mm height complete all as specified and directed. Make : CAT No. ALD-727 of JAQUAR or its equivelant model of make as per list of manufacturer

S & F in repair Vitreous China thin rim table top basin, oval Shape of Size: 500x380x120 mm excluding taps fixed on granite slab complete all as specified and directed. Make : Jaquar Cat No. JDS-WHT-25937 or equivelant model of make as per list of manufactureRmentioned in PS.

S&F sensor faucet for Wash Hand Basin (Battery Operated) with all accessories complete all as specified and directed. Make : Jaquar Cat No. SNR-51011N or equivelant model of make as per list of manufactureRmentioned in PS.

S & F fancy type chromium plated soap dispenser with glass bottle complete all as specified and directed . Make: Jaquar Cat No.ACN-1135N or equivelant of make as per List of manufacturer's mentioned in PS.

S & F PVC connection pipe 450 mm long and 15 mm dia., fixed to flushing Cistern/ sanitary fittings with PTMT nuts connections at the ends complete all as specified and directed.

S & F vitreous China urinal with with spreader and all fixing accessories set, of Size 330X400X600 mm, starwhite with grating,CP spreader and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. Make: Jaquar Cat No. URS-WHT-13267 or equivelant of make as per list of manufacturer's mentioned in PS.

S&F sensor concealed type flush valve for urinal complete set with installation box & control valve (9V transformer) complete as specified and directed. Make: Jaquar Cat No. SNR-STL-51077E or equivelant of make as per list of manufacturer's mentioned in PS.

S&F urinal partition with 8 mm thick frosted glass ,chrome finish ,size - 900mm(H)x 450 mm(W) complete all as specified and directed. Make: Jaquar Cat No. JSE-CHR-810US450X or equivelant of make as per List of manufacturer's mentioned in PS.

S&F full height urinal partition with with 8 mm thick frosted glass , chrome finish ,size - 1950mm(H)x 600 mm(W) complete all as specified and directed. Make: Jaquar Cat No. JSE-CHR-810UF60H19X or equivelant of make as per List of manufacturer's mentioned in PS.

S&F wall mounted AISI 304 stainless steel finish paper towel dispenser with c/z folds capacity: 400-600 C/Z towels material complete all as specified and directed. Make: Jaquar Cat No. PTD-SAP-DT0106CSN or equivelant of make as per List of manufacturer's mentioned in PS.

S&F Single robe hook with cover in polished chrome with all necessary fixing arrangements complete all as specified and directed. Make: Jaquar Cat No. AKP-35791P or equivelant of make as per list of manufacturer's mentioned in PS.

S&F CP toilet Paper holder with Flap Recessed Type (Stainless Steel) fixed to wall with brass screw complete all as specified and directed. Make: Cat No. AKP-35753PS of Jaquar or its equivelant model of make as per list of manufacturer

S&F stailess steel grab bar of size 300 mm long, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat No. AKP-35701PS or equivelant model of make as per list of manufacturer mentioned in PS.

M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

S&F 110mm bore PVC [SWR] pipes single socketed,pressure rating 6kg/sqcm, type-A grade , in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed.

S&F 110 mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore PVC [SWR] pipes single socketed,pressure rating 6kg/sqcm, type-A grade , in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed.

S&F 75 mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) branch piece, single (Single Y) equal or unequal of any radius complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75mm bore, PVC (SWR) branch piece, single (Single Y) equal or unequal of any radius complete all as specified and directed.

S&F 75mm bore outlet PVC [SWR] Floor trap/ Nahani trap with SS grating including jointing with solvent cement complete all as specified and as directed.

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F aluminium composite panel of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polythene core with PVDF coating of 30 micron, face fully covered with high intensity prismatic (Type-IV) sheeting conforming to type-III of ASTM-D 4956-01 as approved by GE and fixing the same to the structural /wooden/aluminum frame work by means of suitable self tapping screws, rivets or bolts and nuts and erecting in position complete all as specified and directed.

S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to cerntre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete including Hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and directed.

M & L for Providing and fixing Gypsum Board, 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M & L for preparing new surfaces of internal Ceiling, etc and applying two coats of plastic emulsion paint over a coat of primer and over one or more coats of wall care putty to a smooth surface complete all as specified and directed.

Supply only 5.5 mm thick, tinted glass, ordinary quality and glazing with rubber beading for door/window etc in square exceeding 0.5 Sqm in each pane complete all as specified and directed. (Note: The cost of fixing and glazing beads included with the unti quoted rate of respective shutter)

M & L for conceled Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

All as per item No. 83 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto

All as per item No.83 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4.00 Sqmm multistranded FRLSH (ISI marked) and4.00 Sqmm PVC insulated unsheathed solid copper conductor cable FRLSH (ISI marked) as earth lead complete ditto

S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S & F Modular socket outlet 6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.

S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.

S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.

S&F ceiling rose, 65 X 50mm two to three teRminals, PVC/polycarbonate, insolated body complete all as specified and directed.

M & L for Sub main wiring with 2 runs of Single core 2.5 Sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 2.5 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 2.5 Sqmm and one runs of 2.5 Sqmm cable as earth wire and one run of conduit shall be measured as one length)

M & L for Sub main wiring with 2 runs of Single core 6 Sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 6 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 6 Sqmm and one runs of 6 Sqmm cable as earth wire and one run of conduit shall be measured as one length)

S & F powder coated sheet steel Distribution Board, TPN 4 Way, vertical , 415V, Double door with IP 43 protection, IK 09 complete all as specified and as directed.

S&F, commissioning and testing MCB SP 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed

Supply, fixing, commissioning and testing MCB TPN 40- 63 Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed

S & F powder coated sheet steel Distribution Board, SPN 12 Way, , 415V, Double door with IP 43 protection, IK 09 complete all as specified and as directed.

Supply, fixing, commissioning and testing MCB SPN 32 Amps, 240 Volts, 10KA, C curve complete all as specified and as directed

S&F exhaust fan 450 mm sweep, steel body suitable for operation on single phase 240 V AC, 50 Hz and including connecting up with twin core PVC insulated , sheathed flexible copper conductor cable of size 1.50 Sqmm including making good disturbed surfaces to match with surronding complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F outdoor LED Strip light, 24V DC, 25W, 8mm width with IP 65 protection, uniform light distribution and long lasting adhesive and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and directed.

S & F LED Power adopter for outdoor IP65 strip light, 24V DC, 30 Watt suitable for strip lights and connecting up complete all as specified and directed.

S & F environmental friendly, new generation, energy saving, decorative IP 66 LED UP-down Luminaire with wall surface mounting using COB LED as light source complete all as specified and directed. Make : Havells Cat Part No. CLIOWLS15WLED830PSYMTOTG or equivelant model of make mention in PS)

S & F air curtain of size 4 feet, single phase 230v with maximum noise level upto 50 dB and minimum air discharge velocity 12 m/s all as specified and directed. Make : Mitsubishi Cat Part No. GK-3012AS1 or equivalent model of make mention in PS.

S&F Automatic sensor based hand dryers with stainless steel metal finish surface complete all as specified and as directed. Make : Jaquar Cat No. HDR-SSF-AK2807 or equivalent model of make mention in PS

S&F decorative LED Step Light 10W, IP66 rated along with necessary drivers complete all as specified and as directed. Make : Havells Cat No. RADIANTFTR07WLED830PSYMTOPC or equivalent in Bajaj/Crompton/Philips

S&F decorative type LED indicator Board of size 300mm x 300mm showing GENTS and LADIES area signage along with necessary drivers and accessories complete all as specified and directed.

S&F 50mm dia, high density, Polyethylene (HDPE) pipe of pressure rating 6 Kg/cm2 including all fitting required complete all as specified and directed.

S&F elegantly designed sleek recessed mounted pressure die-cast aluminium luminaire 15 watt in powder coated white finish in round profile, ceiling cutout: 155mm dia, height 17.5mm with optimized heat sink for efficient heat dissipation and independent electronic LED driver complete all as specified and directed. Make : Havells cat no EDGEPRORDDLR15WLED840SG2 or equivelant of make as per list of manufacturer's)

S&F UPVC cable trunking casing and capping of size 150x50 mm including cover, bends, elbow, coupler, tees, internal and external bends, arranging existing cables/copper refrigerator pipe etc and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6.00 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed.

M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying well burnt bricks, fly ash bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth lead of 4.00mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect all as shown in electrical plate No. 3 and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by the Engineer-in-Charge. Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost

NAVEEN INFRASTRUCTURES (BID ID -3503526)

lakshmi Engineering Works (BID ID -3503440)

P SRINIVASA RAO (BID ID -3503179)

JAYAM BUILD CONSTRUCTIONS (BID ID -3503232)

V. RAMAKRISHNA RAJU (BID ID -3503072)

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS (BID ID -3503748)

N Sydeswara Rao (BID ID -3500292)