Redesigning and Water Proofing of Open Terrace at Jammu Golf Course, Sidhra.

PART "A" Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in charge. All works above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Suspended floors, roofs, landings, balconies and access platforms.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing carbon steel galvanized (minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete masonry etc. as per direction of Engineer-in-charge. 10x120mm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 25mm thick Second class teak wood with water proof polish- complete job

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and fixing Stainless Steel Designer Panel / Jali / Work made from Grade SS 304 of 2mm thickness, with laser-cut decorative design, polished finish, fixed with suitable frame and accessories as per design and direction of Engineer-in-Charge.

Painting with Synthetic Enamel Paint of Approved Brand and Manufactureto give an Even Shade.Two or More Coats on New Work Over an Under Coat of Suitable Shade with Ordinary Paint of Approved Brand and Manufacture.

Providing and fixing Plain Transparent Acrylic Sheet of 10mm thickness of approved make and quality, suitable for roofing applications, fixed with a properly fabricated frame as per design and site requirement. The sheet shall be UV-resistant, weatherproof, and impact-resistant, providing high light transmission and long-term durability. It shall be securely fixed with self-drilling screws, neoprene washers, and silicone sealant, ensuring a completely watertight installation. The sheet shall be free from waves, bubbles, or scratches and properly aligned in all respects as directed by the Engineer-in-Charge Complete job.

Providing and laying of designer floor tiles (non-skid / matt finish / textured) of size 600 x 600mm. Anti-skid, stain- resistant, minimum 10mm thick, ceramic/ vitrified type as approved by Engineer-in-charge, over 20mm thick cement mortar 1:4 including neat cement slurry for bedding, joint filling with matching shade grout, curing, cutting, levelling and finishing complete in all respects.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:6 (1 cement : 6 fine sand).

Extra for brick work in super structure above plinth level upto floor V-level.

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacture,over the plasterted wall surface to prepare the surface even and smooth complete

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

2.2 KVA Sine Wave Inverter , Input 1 Phase 3 wire and output 1 phase 3 wire with 2 Nos of 12 V 200 aH Battery.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm)

Providing and fixing 12mm thick toughened glass railing using premium quality clear toughened glass panels, including polishing of edges, necessary cut-outs, and fixtures. The system shall include SS 304/316 grade stainless steel railing, comprising top handrail, vertical posts, base brackets, glass clamps/spiders, fasteners, and all accessories complete. Installation to be carried out as per site requirement, alignment, and the direction of the Engineer/Consultant Complete job.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size below flooring, retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing.

Providing and fixing of 6mm HIGH PRESSURE LAMINATE sheet of (Exterior Grade Compact) of any shade,Excellent Light Fastness Property with 3-Layers of U.V Protection,Fire Retardant,Anti Graffite, Environment Friendly green DNA no Urea Contant,and also Chemical Resistant and colour fixing with M.S Almunium tube structure of any Size as required HPL Sheet size 200mmx810mm fix with coloured almunium rivet, one size of piece required 10No rivet and shade slected by the engineer In charge at the time of fixing including all necessary Fitting and Tube. (Make:- Greenlam,Marino,Foundermax Etc).

Providing and laying 18mm thick Granite of any colour and shape (area of slab over 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Carriage of material by M.T including loading unloading and stacking at site complete

Sand for an av. Lead 15.00 Km.

Stone agg. Below 40mm for an av. Lead 15.00 Km.

Bricks for an av. Lead 25.00 Km.

PART "B" PLUMBING Providing & fixing of white vitreous china table top counter oval wash basin/Circular basin/ Square basin (ESSEL CAT NO- 72031100 / KEROVIT CAT NO- KS249 / CERA CAT NO- S2020174) with CP brass waste assembly, CP cast brass bottle trap with extension piece wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.11.2 Kitchen sink without drain board 18.11.2.1 610x510mm bowl depth 200mm (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing of C.P. brass SINK MIXER. including with 450mm Long Copper Pipes & Brass Nuts with all fittings and accessories as per direction of Engineer-Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing of C.P. brass Central Hole Basin Mixer/ Table top Mixer without Popup Waste System (Essel Cat No 113001 / Kerovit Cat No.KB2111010 & CERA CAT NO- F1020451 ). including with 450mm Long Copper Pipes & Brass Nuts with all fittings and accessories as per direction of Engineer-Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing 15 mm nominal bore C.P. brass angle valve (Essel Cat No 113052, Kerovit Cat No- KB2111003 & CERA CAT NO- F1023201) for basin mixer and geyser points or wherever required as per the direction of Engineer Incharge of approved make conforming to IS : 8931. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.(MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 18.28.1 Semi rigid pipe 18.28.1.1 32 mm dia (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing CP BRASS Waste Coupling (ESEEL CAT NO- 301302-F, KEROVIT CAT NO- KA870004 & CERA CAT NO- F8050101) for wash basin and sink, of approved quality and colour: 18.69.1 Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. (MAKE:- Kerovit, Essel, CERA Hindware)

Providing & fixing recessed liquid soap dispenser (ESEEL CAT NO- 140036, KEROVIT CAT NO- KA930009 & CERA CAT NO- F5013111CH ) as per direction of Engineer-Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing SS towel ring (ESSEL Cat No. 113023 ,Kerovit Cat No. KA990005 & CERA CAT NO- F5003105) wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing & fixing of Soap Dish Holder (ESSEL Cat No. 124024, Kerovit Cat No. KA690004 & CERA CAT NO- F5003116) with all fittings as per direction of Engineer-in-charge. (MAKE:- Kerovit, Essel, CERA, Hindware)

Providing and fixing Plane floor trap with heavy class SS grating and setting in floor with cement mortar to match the floor finish as per direction of Engineer-in-charge (size 100 X 75mm mm dia) ISI marked. (MAKE:- Kerovit, Essel, CERA, Hindware)

providing edge moulding to18 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Providing, storing, handling, shifting, installation, testing & commissioning of vertical / horizontal storage type hot water heater fixed to wall with anchor bolts & nuts, 20mm CP brass cock and 20mm non return valve complete including making connection with 15 mm dia CP connecting pipe on Inlet and Outlet, suitable length of power cable and 15A plough Capacity 25 liters

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 18.32.4 Rectangular shape 1500x450 mm (MAKE:- Kerovit, Essel, CERA, Hindware)

SUB HEAD - II : WATER SUPPLY. Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL-PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:( Make : Kitec, Vista, Prayag,Supreme,) Internal work-exposed on wall with clamps at 1.00 meter spacing

1216 (16mm OD) pipe.

1620 (20mm OD) pipe.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. Including with all Necessary fittings & Acessories Complete job. Make ( Make : Kitec, Vista,Gebrat Prayag,Supreme,) INTERNAL WORK-Exposed on wall

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete copatable to connection with composite pipe (make :Rehau / Kitech/gebbrat/Prayag )

15 mm nominal bore

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm dia. nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).

15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing Heavy class SS grating with Cockroach proof SS s

trainer of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge. (Size 100 mm dia) (ISI Marked)

Providing and fixing 100 mm sand cast iron grating for gully trap.

Providing and fixing heavy class SS grating plane including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge (Size 100 mm dia) (ISI Marked)

SUB HEAD - II : DRAINAGE SYSTEM Providing and fixing on wall face unplasticised-Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. MAKE Supreme, asirwad, prince,jain with. All necessary fittings and Accessories as per the Direction of Engineer Incharge.

75MM dia

Points

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1 x 1.5 sq. mm

Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required.

2 X 2.5 SQ.MM + 1 X 2.5 SQ.MM Earth Wire

Supplying and Fixing of Modular Blanking Plate on the existing Modular Plate and Switch Box excluding Modular Plate as required.

Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way (4 + 36), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing 40 A to 63 Arating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply installation testing and commissioning of IP:65 Bush Light 10 W with Spike with system lumen efficacy of 100 lm/W and P.F >0.9 THD <20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.The Foundation for the Same shall be in the scope of Electrical Contractor.

Supply installation testing and commissioning of IP:65 Wall Washer 10 W 3000 K having integrated Driver with system lumen efficacy of 100 lm/W and P.F >0.9 THD <20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.The Foundation for the Same shall be in the scope of Electrical Contractor.

Supply installation testing and commissioning of IP:65 3 W Heavy duty in ground for Walk over areas with system lumen efficacy of 100 lm/W and P.F >0.9 THD <20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.The Foundation for the Same shall be in the scope of Electrical Contractor.

Supply installation testing and commissioning of IP:65 10 W Hanging Light with system lumen efficacy of 100 lm/W and P.F >0.9 THD <20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.The Foundation for the Same shall be in the scope of Electrical Contractor.

INCOMER Adj. TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH

200 A,415 Volts 50Hz Aluminium Busbar set of 4 strips

OUTGOINGS Motorised Change

over 100 A F.P 415 Volts Ac-23 Duty

F.P MCB 63 A 10 Ka "C" Curve

Load Bearing Members to be made out of 2.0 mm CRCA Sheet. Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick. Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required. 3.5 C X 50 Sq.mm A2XFY

Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet) 3½ X50 sq. mm (35mm)