PROVISION OF TYRE BUSTERS FOR MAIN GATES AT DHQ 15 OKHA AND SQN ARAMBADA UNDER GE (I) CG PORBANDAR

Supply, install, testing and commissioning of 6.0 Metre Hydraulic Tyre killer Flat top surface type with electro-Hydraulic drive in separate drive. Emergency operation through hand pump, having steel profile construction to absorb a static load and the wall thickness of the structural components 8 to 10mm, electrical PLC control installed separately in a weather proof lockable steel casing for outdoor installation on a concrete base having maximum 20 Metre distance from the road block, including necessary Civil Work as per Manufactures instructions for installing Road Blocker, complete all as specified and directed by Engineer-in-Charge and comprising of following design parameters and specifications:- (i) System Type Automatic Hydraulic tyre killer active 1-way. (ii) Construction Galvanized steel (iii) Height 150mm (iv) Width 500mm (v) Length 2 mtr to 6 mtr in 500mm Increments (vi) spikes Distance between spikes 100mm. (vii) Opening Closing Time 1-3 sec. (viii) Dia of spikes 25mm (ix) Spike material AISI 304 (x) Blocking Height 60 Degree, 120mm minimum (Customizable) (xi) Power supply voltage 415-440V~ 50-60 Hz

(xii) Absorbed power 1500 W (xiii) Current consumption 1 Amp (xiv) Accessories max. current 500mA (xv) Environment Temperature (-) 20°C to (+)70°C (xvi) Ingress Protection IP56 for control unit (xvii) Humidity 10% to 95%RH (xviii) Duty cycle 100 % (xix) Load bearing Capacity 100 Ton. 6 Metre tyre Killer have:- (a) Supply of Push Button (b) Supply of Single CHANNEL LOOP DETECTOR (c) Supply of Photocell Safety Sensor (d) Supply of Wireless Remote Make: Godrej & Boyce Mfg Co. Ltd Type TC- RBS 675 Basic type or equivalent Make of NEPTUNE.

Supply & Fixing Accumulator & hand pump 440 V 3 phase for Tyre Killer, complete all as specified and directed by Engineer-in-Charge Make: Godrej & Boyce Mfg Co. Ltd Type TC- RBS 675 Basic type or equivalent Make of NEPTUNE.

Supply, laying underground in trenches, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100V grade, cross sectional area 4 core 16 sqmm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing factory made sheet metal enclosure MCB Distribution board Double door IP 43 protection class TPN 4 way 415 volts complete with 200 Amps rated bus bar and neutral link, complete all as specified and directed by Engineer-in-Charge

Supply and fixing MCB TPN 63A 10 KA, class 'C', complete all as specified and directed by Engineer-in-Charge

Supply and fixing MCB SP 5-30 A 10 KA, class 'B', complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth and getting out Soft/ Loose soil, complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well Ramming in layers not exceeding 25 cm thick, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.

Supply and laying 50 /38mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables, laid in trenches/ road/ drain or fixed along wall, poles or laid under floor, complete all as specified and directed by Engineer-in-Charge Make : Rex / Poly/ Gemini

Material & Labour for cutting existing road/hard standing not exc 45 x 45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well ramming watering finish surface 10 cm from top using PCC 1:3:6; including removal of surpluses soil, complete all as specified and directed by Engineer-in-Charge

Material & Labour for bore Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with Earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the Earthing test point, including testing on completion, complete all as specified and directed by Engineer-in-Charge

Please Enable Macros to View BoQ information