PROVN OF TOILET BLOCK, CHAIN LINK FENCE, SHED IN FRONT OF BLDG. NO P-106 AND TOILET IN BLDG. NO P-88 AT RIMC UNDER GE DEHRADUN

Amount

Surface excavation in soft/loose soil n. exc (not exceeding) 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

M&L for plain Cement concrete 1:4:8 Type D-2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Use and waste formwork fair finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Use and waste for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for reinforcement cement concrete (1:1.5:3), type B-1, using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforcement cement concrete in (1:1.5:3), type B-I (20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforcement cement concrete in (1:1.5:3), type B-I (20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for for R.C.C in (1:1.5:3), type B-1, using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over but including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement 1:6 complete all as specified and directed.

M&L for brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar (1:6), surface finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick work or concrete surface, surface finished even and fair complete all as specified and directed.

M&L for preparation of wall and applying two coat of oil bound distemper over a coat of primer including 1 to 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of surface of wall and applying a coat of exterior grade primer over 2-3 mm thick exterior wall care putty complete all as specified and directed.

M&L for applying two coat of exterior emulsion paint on wall and ceiling complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified and directed.

M&L anti termite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square meter of surface area complete all as specified and directed.

M&L anti termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square meter of surface complete all as specified and directed.

M&L anti termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L anti termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mile steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S&F for false ceiling with Fiber Cement Designer tile Ivory painted (High pressure steam cured) of 6mm thickness (as per IS: 14862) of size 595 x 595 mm and any one of the design (Ocean, lake & hill, cascade or electra ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15 x 32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15 x 32 mm made of 0.30 mm sheet, 1200 mm long spaced between main "T" at 600 mm c/c to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 15 x 32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 15 x 20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making , opening for services like diffusers, grills, light fittings, fixture, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3 mm dia with galvanised butterfly level clips, spaced at 1200 mm c/c along Centre black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/Sqm, including re fixing of any type of wire complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C-1, using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed.

M&L for non skid ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Factory made 100% solid wood plastic composite ( WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and directed.

S&F 28-30mm thick moulded WPC factory made 100 % solid door shutter ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 550 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door shall be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

S&F powder coated fixed type aluminium window with 5 mm thick frosted glass wide including all necessary fittings complete using aluminium section 83 x 44.45 x 1.5mm thick complete all as specified and directed.

S&F mild steel framed work for such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 150 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

M & L for cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15mm bore pipe, medium grade, galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

All as per item No 44 above but 20mm bore pipe.

S&F vitreous chinaware wash down water closet pan pedestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe including Heath faucet etc complete all as specified and directed

S&F in vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repair looking mirror 5.00 mm thick mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed.

S&F 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.

S&F chromium plated stop valves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified and directed.

S&F in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed including 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed.

S&F in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower providing with connecting legs & flanges complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated Centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repair brass chromium plated over head shower with shower arm complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm brass float valve with PVC ball complete all as specified and directed.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 150 mm bore salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe complete all as specified and directed.

M&L for cement concrete type D2 (1:2:4) (using 40mm graded aggregate) in surface channels and drains all as specified and directed

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated material n. exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft /loose soil complete all as specified and directed.

S&F mild steel Joist, channel, flat, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W(Gde E-250) quality-A complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long, diameter of neck n exc12 mm complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type weight exc 4 Kg per square metre complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight exc 4 Kg per square metre complete all as specified and directed.

S&F 2mm thick fiber glass reinforced translucent fixed with screw complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality-A complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified

S&F factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc. complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and directed.

S&F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame, complete all as specified and directed.

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed.

S&F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed.

M&L for Brick work with sub class 'B' old size bricks in cement mortar (1:4) straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface is to be finished even and smooth (without using extra cement ) in CM 1:4 complete all as specified and directed.

M&L for setting coat 3mm thick, trowelled to even and smooth finish in CM 1:2 complete all as specified and directed.

M&L providing precast cement concrete (1:2:4), type B-1, using 20mm graded aggregate in landing, cover slabs (for manholes etc) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in copings complete all as specified and directed.

M&L for plain Cement concrete 1:3:6 Type C-2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for coloured GRC (Glass fiber reinforced concrete) tiles 15-18 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified

S&F polycarbonate sheets 8mm thick ,60 micron, ultra violet coated double layered coloured and as approved by GE and fixed with aluminium angles profile rubber gasket silicon screws etc complete all as specified and directed.

M&L for point wiring with 1. 5 Sqmm PVC insulated unsheathed multi stranded single core copper conductor cable in PVC concealed conduit wiring and including making good with factory made modular pressed terminal box (recessed) with 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch.

All as per item No.91above but for one pin 5 A socket outlet independent point.

All as per item No.91 above but for one pin 5 A socket outlet on same board.

All as per item No.91 above but with 4 Sqmm cable for one 6 pin 15A socket outlet point on independent board.

S&F switch piano flush, button type 5 Amp SP 250V AC complete all as specified and directed.

S&F switch piano flush button type 15 Amps SP 250V AC complete all as specified and directed.

S&F socket outlet 2-in-1, 5 Pin 5 Amps 250V AC complete all as specified and directed.

S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified and directed.

S&F ceiling rose surface Bakelite 3 terminals of size 65x25mm. complete all as specified and directed.

S&F LED tube light alluminium extruded body with integrated electronic driver , 20 W, 4 feet complete all as specified and directed.

S&F LED Mirror light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metallic exhaust fan complete all as specified and directed.

S&F water heater storage type, electric, capacity 50 litres AC single phase 230/ 240 V o and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

S&F sheet metal enclosures with socket plug top with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and directed.

S & F sheet metal enclosure SPN for DB's when MCB's to be used 8 way with 200 Amps bus bar and double door complete all as specified and directed.

S & F sheet metal enclosure TPN for DB's when MCB's to be used 6 way with 200 amps bus bar and double door complete all as specified and directed.

S&F MCB TPN 63 Amps 10 kA, 430 Volt complete all as specified and directed.

S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified and directed.

S&F MCB SP 240 Volt 10 KA, 6 to 40Amp conforming to IS complete all as specified & directed.

M&L for sub main wiring with 3 runs(1 run for Phase+1 run for Neutral &1 run for Earth) of 4 Sqmm single core, PVC insulated, unsheathed, multi stranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed wiring with PVC conduit pipe of medium duty not less than 15 mm dia including necessary steel conduit specials and connecting with suitable size thimble, and making good surface of disturbed wall/ceiling/floor as match with existing complete all as specified and directed. Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

M&L for earthing complete with GI or steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI earth strip 4 Sqmm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer neutral/body/ Lt panel etc. and testing on completion, complete all as specified and directed.

Supply and Laying XLPE insulated GI strip or wire armoured electric power cable with stranded aluminium conductor 1100 V grade of size 50 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unserviceable LT Cable for laying of cable and getting out complete all as specified and directed.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.

M&L for GI tubing medium grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc of size 50mm dia complete all as specified and directed.

M/s RAM RATAN AND SONS

M/s Anil Kumar

MOHAN LAL GUPTA

M.K Engineers

RAMAPATI ENGINEERING SERVICES

AYUSH CONSTRUCTION COMPANY