Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAdmitted-Finance | ₹1.5 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | VIJAYAN PP L1 |
|---|---|---|---|---|
| 1.00Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: | ||||
| 1.10 | All kinds of soil | 5 | Sqm | 209 ₹1,045 Lowest |
| 2.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering . | ||||
| 2.10 | All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.5 | Cum | 9,650 ₹24,125 Lowest |
| 3.00 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns. | 6 | Sqm | 440 ₹2,640 Lowest |
| 4.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 46 | Sqm | 930 ₹42,780 Lowest |
| 5.00Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | ||||
| 5.10 | Ridges plain (500 - 600mm) | 7 | Mtr | 670 ₹4,690 Lowest |
| 6.0015 mm cement plaster on the rough side of single or half brick wall of mix : | ||||
| 6.10 | 1:6 (1 cement: 6 fine sand) | 93 | Sqm | 470 ₹43,710 Lowest |
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
30 Mar 2026, 6:00 pmClosed
EE (CIVIL)
BSNL CIVIL DIVISION KANNUR
Civil works for converting DG shed as BTS equipment room for PALLIKUNNU TE.
2026_BSNL_272702_1
29/NIT/EE-KNR/2025-26
Open Tender
Civil Works
Item Rate
30 days
Pallikunnu
Please refer Tender Documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL, Kannur.
₹3,000
6 Apr 2026
23 Mar 2026
1 Apr 2026
23 Mar 2026
30 Mar 2026
23 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: | |||||
| 1.1 | All kinds of soil | - | Sqm | - | - |
| 2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering . | |||||
| 2.1 | All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | Cum | - | - |
| 3Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns. | |||||
| 4Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 5Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||||
| 5.1 | Ridges plain (500 - 600mm) | - | Mtr | - | - |
| 615 mm cement plaster on the rough side of single or half brick wall of mix : | |||||
| 6.1 | 1:6 (1 cement: 6 fine sand) | - | Sqm | - | - |
stage.html
html • 0.03 MB
technical_318211.pdf
techsummary_318211.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
NITPallikunnu.pdf
Tender Documents • 0.75 MB
BOQ_318211.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .