SPECIAL REPAIR OF BATHROOM CUM TOILET BLOCK OF REGT HQ TROOPS LINES AT NEW KLP OF 147 LT AD REGT (COMP) , PROVN OF 15 X DESERT COOLERS FOR 29 FAD, PROVISION OF HARDSTANDING FOR DEPLOYMENT OF GUNS AND RADAR IN TRAINING AREA OF 147 LT AD REGT (COMP)

Amount

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. complete all as specified and directed.

M & L for glazed coloured ceramic tile in vertical surface 350 x 250 x 7mm/ 450 x 350 x 7mm thk set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing in Cement mortar 1:6 10mm thk all as specified

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n. exc. 1.5 Sqm each.

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

S & F flush door shutters 30 mm thick, solid core of block boards construction, MR grade, commercial type with stiles rails and lipping of timber as given in group 2B of Annex B of IS 2202 (part 1) : 1999,, both sides face panels of plywood as per IS 710 : 2010, internally lipped complete all as specified

S&F aluminum powder coated window and ventelator shutter sliding type three track way with or without sash bars of aluminum section weighing 0.55 Kg per Sqm including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete .

S & F 5mm thick figured glass pin headed type into aluminum frame in square n exc 0.5mm sqqm in each pan complete

Supply & Fixing in repair PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm

S&F in repairs floor door stopper with overall length of cover plate is 150 mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S & F Butt hinges medium weight cold rolled mild steel 75mm

S & F Butt hinges medium weight cold rolled mild steel 100mm

S&F 150mm long Mild steel barrel tower bolt, stove enamelled black, with bright bolt and fixed.

S&F 150mm long Aluminium handles cast type anodised

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

M & L for two coats exterier premium acrylic emulsion anti fungale weather coat paintover a coat of primer over newly plastered surface Note:Tint of the paint shall be all as directed by EIC at site

M&L for preparation of newplastered surfaces & applying two coats of oil emulsion distemper over a coat of primer on walls.

S & F of 32 mm bore brass chromium plated bottle trap for wash basin with inlet and outlet, screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

Supply and fix in repair vitreous china, pedestal pattern EWC white/colour including seat cover of suitable size (excluding flushing cistern and flush pipe) including provison of concrete

S & F in repair of 100 mm bore cast iron ‘P’ or ‘S’ trap complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan orissa pattern size 630 x 450mm white with integral foot rest

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket

S & F in repairs Brass cromium plated shower rose of 125 mm dia complete all as specified.

S&F in repair stop/ angle valves cast copper alloy,fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy fancy type chromium platted with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs 15 mm dia stop valves concelaed type cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.

Taking up or down steel tubes and connections of 15mm dia bore of pipe

All as per item No. 35 above but bore of pipe 20mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 20mm

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S & F PVC Connection 15mm size with PTMT Nuts of length 450mm complete all as specified and as directed.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.

Supply only Liquid water proofing compound .

M&L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over 10mm thk plaster in CM (1:6) (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane. (e) The make / treatment shall be from the one of the following manufacturer:- (i) 'Moply FP' of M/s Texsa (I) Pvt Ltd. (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product

M & L for complete removal of existing treatment on walls applying two coats exterier premium acrylic emulsion anti fungale weather coat paintover a coat of primer. Note:Tint of the paint shall be all as directed by EIC at site

Taking out existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

S & F in repairs rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes including dismantling all as specified and as directed complete all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms ) complete all as specified and as directed.

Demolition of brick work/stone boulder masonery built in cement mortar in any position complete all as specified and directed.

M & L for Brick work with sub class B brick straight or curved on plan to any radius in half brick in CM 1:6

Dismantling / taking down AC waste/vent pipes fixed to walls with all fittings/ accessories any dia pipes all as specified and directed by Engineer-in-Charge.

S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 75 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F,110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F,75 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F, 75 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) junction single T equal type 75mm

S & F PVC (SWR) branch piece single Y equal or unequal 110mm

S & F PVC (SWR) branch piece single Y equal or unequal 75mm

S & F PVC (SWR) floor trap plain with grating including grating jointing with solvent cement 75mm

Demolition of Cement Concrete reinforced of any description and in any position not otherwise specifically provided for

M&L for RCC type M-20 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed by Engr-in-Charge.

Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms wash Basin top and like in cement mortar (1:4) including rounding edges of sides, pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in Suken portion exe 15 cm thickness (below or aboveground level) complete all as specified and directed.

M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed.

S&F Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed.

S & F in repair vitreous china urinal, bowl type 465 x 355 x 265(back or corner wall type) complete including providing and fixing plugs, bedding urinal against urinal against wa;; om CM 1:2 seciromg iroma; tp [;igs wotj amd omc; 60mm long brass screws, pointing around uringl back in cement; fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe

M&L for Excavation over areas n.exc. 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Removing excavated material (soil) exc. 1.5 km and n exc 5 km and depositing wheere directed completed all as specified and directed

M & L for hardcore of broken stone or boulders, of gauge n exc 63 mm deposited spread and levelled in layers, watered and rammed to a true surface complete all as specified and directed

M & L for 100mm thk PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base for hard standing complete all as specified and directed

M & L for cement concrete work in pavement/hardstanding of flexural strength 49kg per sq cm in field using 400 kg of cement per cub mtr of concrete 25cm or less complete all as specified and directed

Finishing surface of concrete roads, pavement etc by brooming complete all as specified and directed

M & L for forming 12mm thk expansion joints 150mm deejp filled with performed bituminius filler and 1op 30mm primed and sealed with sealing compound grade `A' complete all as specified and directed

M & L for forming contraction (Dummy) joints 65mm deep x 10mm wide sealed with sealing compound grade `A' complete all as specifed and directed

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour not less than 50 litre water storage capacity (or nearest size).Plastic/PVC Body. Make : Bajaj/Voltas/Symphony

Dismantling of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortor

M & L for machine cut kota stone slab flooring 20x25mm thk over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core sizes:- Make :- Havells/ Polycab/ Gloster

M & L for DWC HDPE Pipe 40 mm outter dia for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge.

Excavation Soft / loose soil in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

M&L for Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

Supply & erect in repair in position steel tubular pole swaged type as per IS 2713 complete with MS base plate, finial tapper plug cap bolt, nut, screws including MS angle for fixing of flood light etc all as specified for swaged pole of type 410 SP 55 , 11 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

M&L for provision of PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.

M & L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.

Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp

Taking down carefully copper/aluminium point wiring (light/exhaust fan) complete,(fittings such as switches, ceiling roses,pendants etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable main switches,DBs alongwith teak wood boards etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed copper conductor FRLSH cable 1100 V grade drawn through concealed PVC conduit of suitable size as per site requirement including tees, junctions etc fixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire complete ISI marked for suitable size excluding modular flush box, cover plate all accessories and making good the disturbed surfaces of wall by cement work after cutting and conduiting into the wall all and matching the surface to the existing finishing colour all as specified & directed.

One light point controlled by one one way switch

One exhaust fan point controlled by one one way switch

One switch socket 5 pin 5 Amps flush type on same board.

S&F submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 1100 Volts grade cables 4 Sqmm and 1 run 4 Sq mm Earth Wire PVC insulated multistrand cupper conductor cable (FR) drawn through PVC casing caping of suitable size and with all accessories all as directed and specified by Engr-In-charge.

S & F Switch piano flush type single pole one way 230V 6Amps

S & F ceiling rose surface three terminals ,230 Volts

S & F socket outlet 2-in-1, 3 pin 5 Amps.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply & fix LED tube light along with fixture, 20 W

Supply and fix LED building security light 35/36 W IP 65

Supply and fix exhaust fan steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers but of size 450 mm sweep heavy duty

M & L in repair MCB DB SPN sheet metal double door enclosure mounted into the wall of suitable size for mounting MCB 230 Volts , 4 way

S & F MCB SPN 40 amps, 240Volts 10KA

S & F MCB SP 5-40 amps, 240Volts 10KA

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core (for use of toilet)

S & Laying in repair/ replacement cable 35 x 3.5 Core XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with strandad aluminum conducter (for use of Single line Accn) Make : Polycab/ Finolex/Universal

M & L for High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed/ laid in complete to walls, ceilings or in floors, trenches etc. for cable protection

Supply and fixing, testing and commissioning outdoor weather proof cubical panel board made out of 3.15mm thick CRCA sheet duly powder coated with locking arrangement on both sides opened, mounted over 50x50x6mm angle iron stand at the bottom of height less than 45 cm above ground level and not less than 30cm in ground / floor mounted duly grounted in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) factory made duly powder coated and 300amps aluminium bus bar including panel wiring complete comprising of following :- (a) Voltmeter 0-415 Volts. (b) Ammeter 0-50 Amps. (c) Indicator lamp - 03 Nos (d) MCCB 4 Pole 63 A - 04 No. (for outgoing) (e) MCCB 4 Pole 100 A - 01 No. (for incomer) (f) Single phase/dry run protection system (g) CTs 50/ 5 ma - 1 Set (h) Busbar 200 Amp - 1 set complete wiring of panel & Installation all as specified.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire (upto DB) all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion.

M & L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (for panel earthing).

H S TAKHI (BID ID -3147458)

DINESH CONSTRUTION (BID ID -3148406)

S Y Itkar Construction and Company (BID ID -3153135)

RAMESH PATIL (BID ID -3151986)

Shri Sai Electricals (BID ID -3152903)

KARPE AND SONS CONSTRUCTION (BID ID -3149382)

SLB Enterprises (BID ID -3148463)