M/o Road (C/o Footpath and Drain Repair on Gejha Road in Sector-110) Noida

Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines grades and cross section and transporting to the embankement location within all lifts and lead upto 1000m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.50 mt.

Earth work in embankment in ordinary soil embankment to be in 20 cm layer breaking clods. Watering, rolling each layer with 1/2 tonne roller or wooden roller or steel rammer and rolling every third or top most layer with power roller or minimum 8 tonne including 1.5m lift and all lead including cartage of earth by Mechinical Transportation and all T & P labour etc. required for proper completion or work (earth shall be arranged by the contractor at his own cost from out side of Noida.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically treated bars of Grade Fe-500D or More

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). All works upto plinth level

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix :1:4 (1 cement : 4 coarse sand)

Neat cement punning

Providing wall putty on new Surface with Approved Quality Material of Berger/ J.K / Birla or Similar Make 2 Coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work

Fabrication & Manufacturing of Prestressed hollow core slab (Hollow area 25 to 30%) of different thickness & modular width 1200mm in controlled factory environment with approved methodology confirming to IS 10297:1982 by using long line casting method having arrangement of proper steel bed. Concreting should be done by batch mixing planbt capable of producing zero slump concrete transported through automatic, shuttels of standard make & layed on bed with the help of extruder/slopformer, finishing curing and also provision of steam curing. Cutting, making necessary cutout/holes of required sizes for services in slab element after achieving required strength, Yard handling & stacking all complete as per approved shop drawings & design mix as per the direction of the engineer-in-charge.(cost of strands should be paid separately). Note Excess/less cement over the specified cement content used as per design mix is payable/recoverable separately) Including steel & transport charge 150mm thick hollow core slab.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size)

Please Enable Macros to View BoQ information

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 30/GM(C)/SM(WC-8)/ET/2025-26

Tender :

Name of Tenderer:

TOTAL BOQ COST OF PROJECT (In Rs.)

Minimum Value

SOLVENCY (Issued within a period of minimum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

For Similarity of Works:- dsoy lM+d fuekZ.k@ Hkou fuekZ.k@ ukyh@ pkjnhokjh@ QqVikFk@ bUVjykWfdax VkbZy@lM+d lqnz<[email protected]ªy otZ@ lh0lh0 jksM@ckWDl dYoVZ ds dk;Z vuqHko ekU; gksxsaA lhoj ,oa tykiwfrZ ds vuqHko izek.k i= ekU; ugha gksxsaA

RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years)

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive fiancial years.

Required Technical Staff

Required Machinary

Character Certificate of Indivisual /partners /directors issued from District Megistrate

Affidavit of not blacklisted

Affidavit for no Blood relation in Noida Authority

Address Proof/Id. Proof of indivisual /partners/directors.

Registration Certificate of GST

Filled in form Capability Statement.

Certified Copies of relevant pages of following documents:

RESULT