Manufacturing ,Supplying and Fixing 600 mm dia Size Kinfe Edge Gate Valve for 600 mm dia SWD Other Civil Works in Diff. places at Ghatlodiya Lake in Bopal-ghuma Area at South west zone AMC.

Name of Work: - As per name of the work mentioned in Tender.

*Special condition of contract for Item_(Providing and laying of interlocking grey paver blocks

unishape of high density 60 mm thick...)mentioned in Technical volume.

● Successful bidder of this tender shall have to purchase 50% of total quantity of paver block from

Amdavad Enviro Projects Pvt. Ltd. The paver blocks shall be as per tender BOQ & tender specifications.

Payment of such 50% Quantity shall be made to Amdabad Enviro Projects Pvt.Ltd. directly by the

successful bidder on mutual agreement of rate between successful bidder & Amdabad Enviro Projects

Pvt. Ltd. AMC shall not be responsible for any kind of dispute between Amdabad Enviro Projects Pvt. Ltd.

& successful bidder or this tender. The successful bidder will be paid by AMC as per tender BOQ item

rate + premium.

● The quality, size, shape, compressive strength & other technical parameter of paver Block shall be as

per IS standards & tender specification and shall be completely successful bidder's responsibility.

● If in case of failure of paver Block or if Paver Block are not as per the standards, the same shall be

rejected. Successful bidder shall remove such failed paver blocks immediately form site and fix new paver

blocks as per standards.

● The successful bidder shall produce a certificate /bill from Amdabad Enviro Projects Pvt. Ltd. showing

quantity of Paver Block which should be minimum 50% of total quantity.

1. All the relevant causes mentioned in the Tender which are related to above clauses shall be read as

mentioned in above AMENDMENT.

2. The above Amendment shall be Part of Tender document & shall be bound to Contractor and shall be

submitted along with other tender documents with duly signed and stamped.

Seal and signature of the bidder ADD. City Engineer

Date :- AHMEDABAD MUNICIPAL CORPORTION

Tender Fee : Rs 900.00 Date of submission : 05.06.2026 Time: :18:00 Hrs

Earnest Money : Rs. 6790.00 Date of Opening : 06.06.2026 Time: 17:00 Hrs

Contractor’s Name & Address :

Manufacturing ,Supplying and Fixing 600 mm dia Size Kinfe Edge Gate Valve for 600 mm

dia SWD Other Civil Works in Diff. places at Ghatlodiya Lake in Bopal-ghuma Area at South

Sr. Rate Amount

1 Job Work of providing,

fabricating, and fixing SS Flange

tail piece of for following dia RCC

pipe for fixing of knief Edge Gate

Valve with using Grouting

matrials . Rate to include

arranging, transporting,

fabricating in SS Sheet flats and

Flange with grouting in RCC

pipe anchoring them in RCC

pipe by anchor bolts and filling

the pipe by rich cement mortar

mixed with chemicals, etc.

(i) 0.00 for 300 mm dia 43996.00 Nos.

(ii) 0.00 for 450 mm dia 61088.00 Nos.

(iii) 1.00 for 600 mm dia 87718.00 Nos.

(iv) 0.0 for 900 mm dia 134105.00 Nos.

(v) 0.0 for 1200 mm dia 154662.00 Nos.

(vi) 0.0 for 1400 mm dia 163570.00 Nos.

(vii) 0.0 for 1600 mm dia 179688.00 Nos.

(viii) 0.0 for 1800 mm dia 228613.00 Nos.

(ix) 0.0 for 2000 mm dia 248248.00 Nos.

2 Job Work of providing,

fabricating, and fixing SS Flange

Body type knief Edge Gate Valve

of following dia (Inside) . Rate to

include arranging, transporting,

fabricating, laser cutting, plasma

cutting, Molding, machining,

Drilling in SS Sheet, flats ,SS Ring

,Flange with rubber lining and

Nut bolts etc. complete.

(i) 0.00 for 300 mm dia 101138.00 Nos.

(ii) 0.00 for 450 mm dia 132737.00 Nos.

(iii) 1.00 for 600 mm dia 173438.00 Nos.

(iv) 0.0 for 900 mm dia 258548.00 Nos.

(v) 0.0 for 1200 mm dia 302328.00 Nos.

(vi) 0.0 for 1400 mm dia 338952.00 Nos.

(vii) 0.0 for 1600 mm dia 376310.00 Nos.

(viii) 0.0 for 1800 mm dia 517063.00 Nos.

(ix) 0.0 for 2000 mm dia 576943.00 Nos.

3 Job Work of providing,

fabricating, and fixing SS

supports, floor and railings on

top of the gate frame to enable

the fixing of gearbox, SS frame

top ends to be bound with the

floor structure of the gear box.

Rate to include providing the SS

sheets, flats to fabricate the top

head stock supporting structure,

spindle cover pipe and fixing the

top plates by bolts in such a

manner that it can be opened

easily for future maintenance at

site, etc. complete.

(i) 0.00 for 300 mm dia 20597.00 Nos.

(ii) 0.00 for 450 mm dia 24013.00 Nos.

(iii) 1.00 for 600 mm dia 29144.00 Nos.

(iv) 0.0 for 900 mm dia 32686.00 Nos.

(v) 0.0 for 1200 mm dia 43018.00 Nos.

(vi) 0.0 for 1400 mm dia 48357.00 Nos.

(vii) 0.0 for 1600 mm dia 53872.00 Nos.

(viii) 0.0 for 1800 mm dia 73208.00 Nos.

(ix) 0.0 for 2000 mm dia 82972.00 Nos.

4 Job Work of providing, turning,

fabricating and fixing SS spindle

connecting the gear box and

barrier and head stock of gearbox

on top of the gate. Rate to include

providing the SS spindle rod,

turning it for the recommended

pitch length of teeth, casting the

gears from SG grade steel,

turning the warm gears ,cutting

teeth in to round gear, turning the

hole on round gear exactly to

match the outer teeth of the

spindle, fixing all assembly to

form the gear box with housings

and bearings, thrust bearing on

top and bottom of round gear

fixed between SS plates, covering

the gear box sides also in by

SS plates .fabrication of head

stock by plates and pipe to form

the standing structure of rotation

height required, fixing all on

platform, etc. complete.

(i) 0.00 for 300 mm dia 40009.00 Nos.

(ii) 0.00 for 450 mm dia 47670.00 Nos.

(iii) 1.00 for 600 mm dia 53535.00 Nos.

(iv) 0.0 for 900 mm dia 67677.00 Nos.

(v) 0.0 for 1200 mm dia 70642.00 Nos.

(vi) 0.0 for 1400 mm dia 78536.00 Nos.

(vii) 0.0 for 1600 mm dia 87087.00 Nos.

(viii) 0.0 for 1800 mm dia 97531.00 Nos.

(ix) 0.0 for 2000 mm dia 111041.00 Nos.

Job Work of providing and fixing

150 NM torque ,36 RPM , ON -

OFF type 415 V,50 Hz, AC Three

Phase Multi turn Electrical

Actuator with enclosure water

tight IP 67 , continuous position

indicator with limit switches etc.

complete.(AMC Approved Rate )

Constructing Valve Chamber /

penal Room on following dia

SWD line (inside clear)including

excavation, refilling, plain cement

concrete (1:4:8) for foundation,

6 Pre cast /situ to cast RCC M-30

20 mm thick inside cement

plaster, PVC foot steps, brick

masonary in C.M. (1:5), including

cost of manhole cover and RCC

slab in RCC M-20 etc complete.

0.0 for 2000 mm dia,1800 mm 139392.00 Nos.

dia,1600 mm dia

0.0 for 1400 mm dia ,1200 mm dia, 105653.00 Nos.

1.0 for 600 mm dia ,450 mm dia,300 76032.00 Nos.

providing and fixing pakka

dummy in following dia RCC

pipe line with using MS plate ,MS

garder ,sand bags, Diversion

pipe, plug ,Brick work, as per

required and removing same after

completion work etc comp.Do As

0.0 for 2000 mm dia,1800 mm 79200.00 Nos.

dia,1600 mm dia

0.0 for 1400 mm dia ,1200 mm dia, 52800.00 Nos.

2.0 for 600 mm dia ,450 mm dia,300 30800.00 Nos.

Providing and casting in situ

Controlled Cement Concrete

(with ordinary portland cement)

M-25 for Well curbs including

necessary shuttering, laying,

vibrating and curing complete.

Flat Top/Bottam Slab with

(ii) 4.00 vertical wall above 25 cm 7936.00 m3

Providing Labour for Mice. Work

for Breakdown work releted job

including required tools

(i) 30.00 Unskilled Labour for 8 Hrs Shift 640.00 Shift

(ii) 5.00 Skilled Labour for 8 Hrs Shift 656.00 Shift

Conveyance charge of earth, lime,

murrum, building ,rubbish,

manual garbage, sludge,

excavated rock, fly ash,aggregate

of any kind etc. complete. Upto

ReFilling available excavated

earth (excluding rock) in trenches,

plinth, sides of foundations etc. in

11 50.00 layers not exceeding 20 cm in 22.00 m3

depth consolidation each

deposited layer by ramming and

Barricating the entire break down

or excavated area on rental basis

using wooden ballies/MS angles

at max 2.00 mt center to center ,G

12 16.00 I sheet, reflective paint board out 1056.00 Rmt

side to avoid accident and for

smooth traffic diversion and The

same shall be removed after

complention of work.

Hiring Charge for JCB machine

bring for excavation of the break

down pit and loading the

13 4.00 excavated soil for shifting another 6412.47 Shift

place or misce.work

etc.complete. as directed.rate for

Hrs working in Day.

Hiring charges of heavy 12 Tonne

capacity Hydro machine for

14 1.00 lifting the Any Matrials when 3334.49 Day

required any time. rate for 8 Hrs

working in Day.

Hiring and operating the Tractor

for Earth work and other

15 8.00 requirements with Arranging fule 2104.09 Day

Set Do As Directed. 8 Hrs

working in Day.

Hiring and operating following

capacity Mud Pumps incl. Cost

of fuel and operator including

the cost of to and fro

16 transportation, laying of the

delivery hoses as required,

lowering and lifting the pumps as

and when required etc. complete.

Set Do As Directed.for 8 Hrs Shift

(ii) 0.00 10 HP 1496.00 Shift

(iii) 0.00 20 HP 2232.00 Shift

Hiring and operating the

Following capacity 3 Phase

Electric Generator for operating

17 machinery, and lighting and

other requirements with

Arranging diesel to run the D.G.

Set Do As Directed. 8 Hrs Shift.

(i) 10.00 10 KVA 2464.00 Shift

(ii) 0.00 20 KVA 2816.00 Shift

(iii) 0.00 40 KVA 4018.00 Shift

Hiring and operating the electric

Breaker Machine for

Dismantaling work for removing

damage manhole and other

requirements with Arranging

cable Set Do As Directed.

Providing lighting arrangement

for doing work at night time.

(in words also)

CONTRACTOR'S SIGNATURE ADD. CITY ENGINEER

(South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

South West Zone Office, Late Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G.

highway, Jodhpur, Ahmedabad-380015.

Municipal Commissioner invites Percentage Rate sealed tenders from interested contractors .

1 Name of work Manufacturing ,Supplying and Fixing 600 mm dia Size Kinfe Edge

Gate Valve for 600 mm dia SWD Other Civil Works in Diff. places

at Ghatlodiya Lake in Bopal-ghuma Area at South west zone AMC

2 Time Limit 12 Months

3 Eligibility Criteria Register “E-2” class in PWD in Govt. R&B/CPWD/AMC or equivalent

registration with any other state Govt. or institutions.

4 Estimated Cost put to tender Rs.

5 Earnest Money Deposit Rs.6790.00 (Demand Draft, Pay order, Bank Guarantee (As per finanance

circular No 56) or Cheque in favour of Municipal Commissioner,

Ahmedabad) To be submitted as prescribed in 7.0 below. Demand Draft

or Bank Guarantee shall be from Nationalized Bank and valid for 120 days.

6 (A) Security Deposit: 5% of Tender Amount

(B) Retention 1. @ 2% of the value of work done will be deducted from each RA bill. It

will be released along with release of payment of Final Bill.

7 Tender fees Rs.900/-Demand Draft / Pay order in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

8 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to Assistant

Manager (South West zone) , Ahmedabad Municipal Corporation, Late

Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club,

S.G. highway, Jodhpur, Ahmedabad-380015

9 Tenders issue date Tenders from the website http://amc.nprocure.com and

http://nprocure.com. shall be down loaded from

10 Last date of receiving Dt. 05.06.2026 up to 18:00 Hrs The tenders received after this date

Tenders. and time will not be entertained under any circumstances.

11 Date of Opening Dt.06.06.2026 at 17.00 Hrs to Assistant Manager "South west Zone

Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club,

S.G. highway, Jodhpur, Ahmedabad-380015

12 Mode of sending the Tender Document shall be submitted in sealed envelope systems By RPAD/ Speed

Documents post/ Hand Delivery/ Courier in sealed covers as described in submission

13 Terms, Condition, & All general condition of contract of Form B1 condition of contract shall be

Specification applicable.

14 GST ltKtk Ftðþ vhevºt lkch - 31, yb>tJt> BGþrlrm5j ftuvtuohNl btk Ítulj ytuVem / v.J.yu. / «tusu¾x rJCtd îtht htuz /

<t.07-07-2017 Bþsc rcÕz´d/jtEx/c{es Ft<tytu îtht cnth vtzJtbtk ytJujt xuLzh suLþk mcbeNl <t.01-07-

2017 vAe fhJtLþk &tg Au, <uJt <btb xuLzhtubtk <&t nJu vAe cnth vtzJtbtk ytJlth

Wvhtuf< rJCtd/Ft<tltk <btb xuLzhtubtk (bxehegj + juch mÃjtg mt&u) GSTlt

ltuxeVefuNl Bþsc GST sgtk jtøþ vz<tu ntug ðgtk, m>hnwk ftblt Bidder yu GST

ltuxeVefuNl Bþscle yuÃjefucejexe ægtlbtk htFelu huxLþk cez´d fhJtLþk hnuNu.

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or all the

tenders without assigning any reasons thereof.

Seal and Signature of the Bidder ADD. City Engineer

(South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

Invitation for Bid (IFB)

1. The AHMEDABAD MUNICIPAL CORPORATION, (Hereinafter called “the Employer”) invites sealed

Tender document from reputed and qualified bidders for the construction of Works detailed in

the Table below:-

Sr. Name of Works Approximate value Bid Security Completion

No. of works (Rs.) (Rs.) Period

1 Manufacturing ,Supplying and Fixing Rs.678580.09 Rs.6790.00 12 months

600 mm dia Size Kinfe Edge Gate Valve

for 600 mm dia SWD Other Civil Works

in Diff. places at Ghatlodiya Lake in

Bopal-ghuma Area at South west zone

2. Tender (a complete set of bidding document) fee shall be Rs. 900/- in the form of Demand Draft /

Pay Order from any Nationalized Bank in favor of MUNICIPAL COMMISSIONER, Ahmedabad,

payable at Ahmedabad, which shall be non refundable. The fees shall be paid at the time of

submitting the tender.

3. Interested bidders shall download the tender documents from website http://amc.nprocure.com

and http://nprocure.com. up to Dt. 05.06.2026 at 16:00 hrs tender fee as mentioned in clause

above shall be paid by the bidder at the time of bid submission.

4. All bids must be accompanied by Bid Security of the amount specified for the Works in the above

Table payable at Ahmedabad and drawn in favor of AHMEDABAD MUNICIPAL CORPORATION,

Ahmedabad. Bid Security will have to be in any one of the forms as specified in Clause of ITB

(Instructions to Bidders).

All Bids must be delivered to Assistant Manager "South West Zone, Zonal Office", Late Shree

Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway, Jodhpur,

Ahmedabad-380015.

Seal and Signature of the Bidder ADD. City Engineer

(South West Zone)

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

SOUTH WEST ZONE

DETAILS OF BANK ACCOUT

1 Contractor's name

3 Telephone/ mobile no.

4 Permanent account no. (PAN

5 Name of the bank

6 Branch name and address

11 Contractor/ supplier's

signature and stamp

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

1. Contractor shall produce the relevant registration certificate of AMC / State Govt /Central Govt.

2. Contractor shall register the work to labour commissioner as per labour act.

3. Contractor shall not sub-let the work without permission of the authority

4. Contractor should have sufficient skilled and unskilled laborers so that he shall start work at different

sites simultaneously. Contractor's having labour force available during festivals shall only apply.

Contractor can not stop the work due to on availably of labour force. In case progress is delayed,

contractor shall be penalized 0.1% of Tender amount per day for work done after time limit,

maximum up to 10% for remaining work.

5. Bitumen rate difference will be paid as per tender conditions, if applicable.

6. Advance payment / machinery advance will not be paid.

7. Payment of running bill will be made as per recent A.M.C. policy in force.

8. No extra payment will be made due to increase of central / state Govt. Taxes. Exluding GST as per As

per circular no 38 Date 21.11.2022of finance department of Ahmedabad Municipal Corporation

9. If the work is not completed within time limit the penalty will be recovered from immediate bills of

10. If the material i.e. MH cover C.C block etc. supplied from Municipal Corporation store then

contractor shall not claim for any extra rate for non execution of such item, partly/fully.

11. In the specifications, "as directed"/"Approved" shall be taken to mean, "as directed"/approved" by

the Engineer-in-charge.

12. Wherever a reference to any Indian Standard appears in the specifications, it shall be taken to mean

as a reference to the latest edition of the same in force on the date of agreement.

13. In "Mode of Measurement" in the specifications wherever a dispute arises in the absence of specific

mention of a particular point or aspect, the provisions on these particular points, or aspects in the

relevant Indian Standards shall be referred to.

14. All measurements and computations, unless otherwise specified, shall be carried out nearest to the

following limits:

(i) Length, width and depth (height)------- 0.01 Meter.

(ii) Areas -----0.01 Sq. Mt.

(iii) Cubic Contents ------0.01 Cu.Mt.

15. The distance, which constitutes lead, shall be determined along the shortest practical route and not

necessarily the route actually taken. The decision of the Engineer-in-charge in this regard shall be

taken as final.

16. Where no lead is specified, it shall mean "all leads"

17. Lift shall be measured from plinth level.

18. Definite particulars covered in the items of work, through not mentioned or elucidated in it,

specifications shall be deemed to be included there in.

19. Reference to specifications of materials as made in the detailed specification of the items of work is

in the form of a designation containing the number of the specification of the material and prefix 'M'

20. Approval to the samples of various materials given by the Engineer-in-charge shall not absolve the

contractor from the responsibility of replacing defective material brought on site or materials used in

the work found defective at a later date.

21. The contract rate of the item of work shall be for the work completed in all respects.

22. No collection of materials shall be made before it is got approved from the Engineer-in-charge.

23. Collection of approved materials shall be done at site of work in a systematic manner. Materials shall

be stone at site of work in a systematic manner. Materials shall be stored in such a manner as to

prevent damage, deterioration or intrusion of foreign matter and to-ensure the preservation of their

quality and fitness for the work.

24. Materials, if and when rejected by the Engineer-in-charge, shall be immediately removed from the

site of work within 24 hours.

25. No materials shall be stored prior to, during and after execution shall be kept in sufficient numbers

and in good working condition on the site of the work.

26. All works shall be carried out in workmanlike manners per the best techniques for the particular

27. All tools, templates, machinery and equipment for correct execution of the work as well as for

checking lines, levels, alignment of the works during execution shall be kept in sufficient numbers

and in good working condition on the site of the work.

28. The mode, procedure and manner of execution shall be such that it does not cause damage or over

loading of the various components of the structure during execution or after completion of the

29. All necessary safety measures and precaution (including those laid down in the various relevant

Indian Standards) shall be taken to ensure the safety of men, materials and machinery on the works

as also of the work itself.

30. The testing charges of all materials shall be borne by the Contractor unless recovery at one percent

towards testing charges is separately made.

INSTRUCTION TO TENDERERS

TENDER VALIDITY PERIOD:

The tender shall be kept valid for acceptance for a period of One Hundred Twenty Calendar days

(120) from opening of price bids.

SECURITY DEPOSIT

Within 10 days of receipt of Acceptance from the Corporation, the successful tender shall furnish to

the Corporation Security Deposit of 5% (five percent) of the contract price cheque or Bank

Guarantee, pay order, or demand draft of Nationalized Banks and Schedule Banks only.

CONTRACTOR'S SIGNATURE ADD. CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be 12 Month after the order to start the works. Progress of work should be in

proportion to time limit.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The contractor

shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic. He shall be responsible

for any damage to public. If any incident happen, during the execution of work. In case of dispute for unseen or

overlooked items the decision of the Dy. City Engineer shall be final. The contractor shall have to give site clean of

all rubbish during the work and at the time of completion of work and hand over the site with final finishing of

the work as directed. All the rejected materials shall be removed from site within 24 hours by contractor at this

risk and cost. Debris shall have to cart daily from site.

If any extra item crops up during the progress of work the same shall be carried out by the contractor and he shall

be paid at the rate fixed by Deputy City Engg. as per the rate analysis based on latest SOR or if item is not

available in SOR than based on current market rates. In case of extra item decision of Deputy City Engg. shall

remain final regarding rate.

If in the interest of the Corporation it is necessary to change either any site or the design of the propose work the

contractor shall carry out the same at his quoted rates without charges any extra and the contractor will have to

carry out the works and he will be paid at the rate quoted by him. No claim for extra rate for subsequent changes

in site and design is entertained.

Octroi exemption passes shall not be given for any materials required for the work. Contractor will be fully

responsible for compliance of the various provisions under contract Act. 1970 and the Rules framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of the tenders for this

work and that the tenderer shall not be allowed to withdraw on modify the offer on his own during the period. If

any tenderer withdraw or makes any modifications or addition in the terms and conditions of his tender not

acceptable to the Municipal Corporation the Municipal Corporation shall without prejudice to any right or

remedy be at liberty to forfeit in full the said earnest money and black list the contractor.

If the work is not carried out within the specified time limit. from the date of order to start the work the penalty

of Rs.- ( As per Form - B1) per day of delay shall be recovered from the immediate bills payable to the contractor.

Contractor has to make his own arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully:-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of demand draft

iv) Condition of Form - B1 Standard Specification of material & code of practice will be applicable. Form B1 can

be is available in website. Specification shall be as per ' R& B Dept. - Govt. of Gujarat booklets of Building

Works & and Road Works Specifications published by Gujarat Book Depot, Sector-21. Gandhinagar.

CONTRACTOR'S SIGNATURE ADD. CITY ENGINEER

& STAMP (South West Zone)

SPECIFICATIONS OF WORK/ MATERIALS – CIVIL

This section gives detail specifications for mainly used materials, for other materials refer Building Specifications.

For materials relevant specification of Building Specification shall apply.

TECHNICAL SPECIFICATIONS

NAME OF THE WORK:- Manufacturing ,Supplying and Fixing 600 mm dia Size Kinfe Edge Gate

Valve for 600 mm dia SWD Other Civil Works in Diff. places at Ghatlodiya Lake in Bopal-ghuma Area

at South west zone AMC.

Item No.1 : Job Work of providing, fabricating, and fixing SS Flange tail pieces set of for following dia RCC pipe

for fixing of knief Edge Gate Valve with using Grouting matrials . Rate to include arranging,

transporting, fabricating in SS Sheet flats and Flange with grouting in RCC pipe anchoring them in

RCC pipe by anchor bolts and filling the pipe by rich cement mortar mixed with chemicals, etc.

complete. (AMC Approved Rate -12 % GST)

Job Work of providing, fabricating, and fixing SS Flange tail pieces set of for following dia RCC pipe

for fixing of knief Edge Gate Valve with using Grouting matrials . Rate to include arranging,

transporting, fabricating in SS Sheet flats and Flange with grouting in RCC pipe anchoring them in

RCC pipe by anchor bolts and filling the pipe by rich cement mortar mixed with chemicals, etc.

complete. (AMC Approved Rate -12 % GST)

Item No.2 : Job Work of providing, fabricating, and fixing SS Flange Body type knief Edge Gate Valve of

following dia (Inside) . Rate to include arranging, transporting, fabricating, laser cutting, plasma

cutting, Molding, machining, Drilling in SS Sheet, flats ,SS Ring ,Flange with rubber lining and Nut

bolts etc. complete.(AMC Approved Rate -12 % GST)

Job Work of providing, fabricating, and fixing SS Flange Body type knief Edge Gate Valve of following

dia (Inside) . Rate to include arranging, transporting, fabricating, laser cutting, plasma cutting,

Molding, machining, Drilling in SS Sheet, flats ,SS Ring ,Flange with rubber lining and Nut bolts etc.

complete.(AMC Approved Rate -12 % GST)

Item No.3 : Job Work of providing, fabricating, and fixing SS supports, floor and railings on top of the gate

frame to enable the fixing of gearbox, SS frame top ends to be bound with the floor structure of the

gear box. Rate to include providing the SS sheets, flats to fabricate the top head stock supporting

structure, spindle cover pipe and fixing the top plates by bolts in such a manner that it can be

opened easily for future maintenance at site, etc. complete.(AMC Approved Rate -12 % GST)

Job Work of providing, fabricating, and fixing SS supports, floor and railings on top of the gate

frame to enable the fixing of gearbox, SS frame top ends to be bound with the floor structure of the

gear box. Rate to include providing the SS sheets, flats to fabricate the top head stock supporting

structure, spindle cover pipe and fixing the top plates by bolts in such a manner that it can be opened

easily for future maintenance at site, etc. complete.(AMC Approved Rate -12 % GST)

Item No.4 : Job Work of providing, turning, fabricating and fixing SS spindle connecting the gear box and barrier

and head stock of gearbox on top of the gate. Rate to include providing the SS spindle rod, turning

it for the recommended pitch length of teeth, casting the gears from SG grade steel, turning the

warm gears ,cutting teeth in to round gear, turning the hole on round gear exactly to match the

outer teeth of the spindle, fixing all assembly to form the gear box with housings and bearings,

thrust bearing on top and bottom of round gear fixed between SS plates, covering the gear box

sides also in by SS plates .fabrication of head stock by plates and pipe to form the standing

structure of rotation height required, fixing all on platform, etc. complete.(AMC Approved Rate -

Job Work of providing, turning, fabricating and fixing SS spindle connecting the gear box and barrier

and head stock of gearbox on top of the gate. Rate to include providing the SS spindle rod, turning it

for the recommended pitch length of teeth, casting the gears from SG grade steel, turning the warm

gears ,cutting teeth in to round gear, turning the hole on round gear exactly to match the outer teeth

of the spindle, fixing all assembly to form the gear box with housings and bearings, thrust bearing on

top and bottom of round gear fixed between SS plates, covering the gear box sides also in by SS

plates .fabrication of head stock by plates and pipe to form the standing structure of rotation height

required, fixing all on platform, etc. complete.(AMC Approved Rate -12 % GST)

Item No.5 : Job Work of providing and fixing 150 NM torque ,36 RPM , ON -OFF type 415 V,50 Hz, AC Three

Phase Multi turn Electrical Actuator with enclosure water tight IP 67 , continuous position

indicator with limit switches etc. complete.(AMC Approved Rate )

Job Work of providing and fixing 150 NM torque ,36 RPM , ON -OFF type 415 V,50 Hz, AC

Three Phase Multi turn Electrical Actuator with enclosure water tight IP 67 , continuous

position indicator with limit switches etc. complete.(AMC Approved Rate )

Item No.7 : providing and fixing pakka dummy in following dia RCC pipe line with using MS plate ,MS garder

,sand bags, Diversion pipe, plug ,Brick work, as per required and removing same after completion

work etc comp.Do As Directed.(AMC Approved Rate -12 % GST)

providing and fixing pakka dummy in following dia RCC pipe line with using MS plate ,MS garder

,sand bags, Diversion pipe, plug ,Brick work, as per required and removing same after completion

work etc comp.Do As Directed.(AMC Approved Rate -12 % GST)s

Item No.8 : Providing and casting in situ Controlled Cement Concrete (with ordinary portland cement) M-25 for

Well curbs including necessary shuttering, laying, vibrating and curing complete.(GWSSB SOR

2022-23, Section - C1 , Item No -6, Page No -44)

Providing and casting in situ Controlled Cement Concrete (with ordinary portland cement) M-25 for

Well curbs including necessary shuttering, laying, vibrating and curing complete.(GWSSB SOR 2022-

23, Section - C1 , Item No -6, Page No -44)

Item No.9 : Providing Labour for Mice. Work for Breakdown work releted job including required tools

etc.comp.(As per GWSSB SOR 2022-23, Basic Rate + PF + ESIC + Insurance+ GST+ tools+

Transpotation+ others Allowance)

Providing Labour for Mice. Work for Breakdown work releted job including required tools

etc.comp.(As per GWSSB SOR 2022-23, Basic Rate + PF + ESIC + Insurance+ GST+ tools+

Transpotation+ others Allowance)

Item No.10 : Conveyance charge of earth, lime, murrum, building ,rubbish, manual garbage, sludge, excavated

rock, fly ash,aggregate of any kind etc. complete. Upto 5.0 Km lead.(AMC Approved Rate)-12 %

Conveyance charge of earth, lime, murrum, building ,rubbish, manual garbage, sludge, excavated

rock, fly ash,aggregate of any kind etc. complete. Upto 5.0 Km lead.(AMC Approved Rate)-12 % GST

Item No.11 : ReFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and

watering.(GWSSB SOR 2022-23, Section - Part-1 &2 B , Item No -14.1, Page No -40)

ReFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and

watering.(GWSSB SOR 2022-23, Section - Part-1 &2 B , Item No -14.1, Page No -40)

Item No.12 : Barricating the entire break down or excavated area on rental basis using wooden ballies/MS

angles at max 2.00 mt center to center ,G I sheet, reflective paint board out side to avoid accident

and for smooth traffic diversion and The same shall be removed after complention of work.(AMC

Approved Rate)-12 % GST

Barricating the entire break down or excavated area on rental basis using wooden ballies/MS

angles at max 2.00 mt center to center ,G I sheet, reflective paint board out side to avoid accident

and for smooth traffic diversion and The same shall be removed after complention of work.(AMC

Approved Rate)-12 % GST

Item No.13 : Hiring Charge for JCB machine bring for excavation of the break down pit and loading the

excavated soil for shifting another place or misce.work etc.complete. as directed.rate for 8 Hrs

working in Day. (GWSSB SOR 2022-23, Section - Part-2 E , Item No -7, Page No -105)

Hiring Charge for JCB machine bring for excavation of the break down pit and loading the excavated

soil for shifting another place or misce.work etc.complete. as directed.rate for 8 Hrs working in Day.

(GWSSB SOR 2022-23, Section - Part-2 E , Item No -7, Page No -105)

Item No.14 : Hiring charges of heavy 12 Tonne capacity Hydro machine for lifting the Any Matrials when

required any time. rate for 8 Hrs working in Day. (GWSSB SOR 2022-23, Section - Part-2 E , Item No

-7, Page No -105)

Hiring charges of heavy 12 Tonne capacity Hydro machine for lifting the Any Matrials when required

any time. rate for 8 Hrs working in Day. (GWSSB SOR 2022-23, Section - Part-2 E , Item No -7, Page

Item No.15 : Hiring and operating the Tractor for Earth work and other requirements with Arranging fule Set

Do As Directed. 8 Hrs working in Day. (GWSSB SOR 2022-23, Section - Part-2 E , Item No -7, Page

Hiring and operating the Tractor for Earth work and other requirements with Arranging fule Set Do

As Directed. 8 Hrs working in Day. (GWSSB SOR 2022-23, Section - Part-2 E , Item No -7, Page No -

Item No.16 : Hiring and operating following capacity Mud Pumps incl. Cost of fuel and operator including the

cost of to and fro transportation, laying of the delivery hoses as required, lowering and lifting the

pumps as and when required etc. complete. Set Do As Directed.for 8 Hrs Shift (AMC Drainage SOR

Hiring and operating following capacity Mud Pumps incl. Cost of fuel and operator including the

cost of to and fro transportation, laying of the delivery hoses as required, lowering and lifting the

pumps as and when required etc. complete. Set Do As Directed.for 8 Hrs Shift (AMC Drainage SOR )-

Item No.17 : Hiring and operating the Following capacity 3 Phase Electric Generator for operating machinery,

and lighting and other requirements with Arranging diesel to run the D.G. Set Do As Directed. 8 Hrs

Shift.(AMC Drainage SOR )-12 % GST

Hiring and operating the Following capacity 3 Phase Electric Generator for operating machinery,

and lighting and other requirements with Arranging diesel to run the D.G. Set Do As Directed. 8 Hrs

Shift.(AMC Drainage SOR )-12 % GST

Item No.18 : Hiring and operating the electric Breaker Machine for Dismantaling work for removing damage

manhole and other requirements with Arranging cable Set Do As Directed.(AMC Drainage SOR )-12

Hiring and operating the electric Breaker Machine for Dismantaling work for removing damage

manhole and other requirements with Arranging cable Set Do As Directed.(AMC Drainage SOR )-12 %

Item No.19 : Providing lighting arrangement for doing work at night time. (AMC Drainage SOR )-12 % GST

Providing lighting arrangement for doing work at night time. (AMC Drainage SOR )-12 % GST

I HAVE ALSO GONE THROUGH TECHNICAL SPECIFICATIONS FOR THE ITEMS (AS PER

STANDARD P.W.D. TECHNICAL SPECIFICATION FOR THE ITEMS AND ALSO I HAVE THE

BOOK OF THE SAME) AND AGREE TO ABIDE BY THEM.

IN CASE OF WHERE IS NO TECHNICAL SPECIFICATION FOR THE ANY ITEMS AVAILABLE,

SPECIFICATION GIVEN BY THE ENGINEER-IN-CHARGE SHALL BE FOLLOWED AND FOR

THE SAME I AGREE TO ABIDE BY THEM.

CONTRACTOR'S SIGNATURE ADD City Engineer

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

As per City Engineer’s circular no.-6/2011-12 Dt.24.6.2011 all terms & conditions

will be applied.

Seal and Signature of the Bidder ADD City Engineer

Date: (South West Zone)