Erection of 2km approx 3.3kV Overhead Line from Main Substation to Main Pumping Station, including 150 meters of Underground HT Cable Laying, installation of Two no of 3.3kv 415 and 3. 3kv/220v Transformers and LT Overhead Line under Sarubera Project

Erection of staci subular ne mil pole suutis cement concrete 116(1 cement 3 cnane sand graded some nggregate 40 nan nominal vizes foundation including excavation and refitting and secured with holding clamps, bolts, nuts, etc as required.

Supplying & crection of stay set complete (galvanized) with 19/20 mm dias 1.8 Mir ng May rod anchor plate of size 45cm x 45cm x 7.5 mm thimble stay clamp turn buckle (ilmm60cm) 17-400 nun dia 6.1. wire and strain Insulater etc in crvnent concrete (lcernent Seourse sand 6 graded stone aggregate 40mon nominal size) foundation including excavation & refilling ele ax required

Supplying and evection of 11 KV pin insulator complete with large steel head G1 pin, muts washers ete, as required

Supplying and erection of 11 KV disc insulame for 11 KV over head lines with galvanised insulator fittings, hall and socket type and complete with galvanised sirain clamps, helis, nurs washers etc. as required (Double Duc)

Supplying of chamel iron 75 nim X 40 mm X 6 man (7.14 kg per metro) poie top bracket cross arm for single 11 KV over head line conductor complete with 50 виц Х 6mm flat icon clamp, bolts, nuts and washers including drilling holes for intatatur pins, bolts and nuts eic and painting with primer and finish paint as required

Supplying of channel ins 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross sem for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 30 mits X 6mm M.S. flat iron clamps, holts and nuts including drilling boles for insulator pins, bolts, auts and washers etc (as per drawing) and painting with primer and finish paint as required.

Supply of two lengths of channel iron 75mm x 40mm x 7.5Kg/mir double pole cross arm for 3 wire OH Line conductors complete with though bolts & nuts for clamping to the poles 50mm x 6mm MS. flats welded on one side the channel iron and with bolts & nuts on the otherside for lying cross arm together including, drilha holes for insulators pins/fittings, bolts & nuts etc. and painting with primer and finish point as required

Supply & errection of a set of cross bracing FRI same work for O.H.line double pole structure having four members fabricated out of 50 nmm X 50 mm X 6 mm angle irop to form a rectangle of minimum size 1400 mum width X 2500 mm height complete with 50 mm X 6 mm MS flat im clamps, bolts & nuts including drilling boles for insulator pins, bolts & nuts etc and painting with primer & finish paint as required.

Erection of pole topóstraight two wire V shape two wire, angle itoo/channel iron, cross arm on meel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Erection of double pole 3 wre cross arm for 11KV/22KV/33KV overbead lines as required