Special Repair to B-18 (Block No 1 & 2 G+2, G+1), C-01 Units & Police Station at Shill. Dist: Junagadh.(Including Electrical work)

Name of Work : Special Repair to B-18 (Block No 1 & 2 G+2, G+1), C-01 Units &

Police Station at Shill. Dist: Junagadh.(Including Electrical work)

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

1 Removing & Scraping of old Deteriorated plaster of any 1604.00 Sqm 19.69 Rupees Nineteen And

thickness from wall/R.C.C. member including stacking of Paise Sixty Nine Only

serviceable material and disposal of unserviceable from site

of work with all.

2 Dismentaling tiled of stone floors laid in mortar including 159.50 Sqm 48.63 Rupees Forty Eight And

stacking of serviceable materilas and disposal of Paise Sixty Three Only

unserviceable materials with all lead and lift.

3 Dismantling santtary fittings like wash basin . W.C. pan 26.00 No 410.13 Rupees Four Hundred

Indian and European type, flushing tank etc. including Ten And Paise Thirteen

stacking the materials with all lead and lift. Only

4 Dismantling of PVC/U PVC Pipe for any dia... with all lead 556.50 Rmt 20.00 Rupees Twenty Only

5 Credit Value for PVC/UPVC Pipe ….etc Complete. 556.50 Rmt -2.00 Rupees Two Only -1113.00

6 Dismentling doors, windows, ventilators etc. (wood or steel) 36.00 Each 190.19 Rupees One Hundred

shutters including chowkhats architraves, holdfasts and Ninety And Paise

other attachment etc. complete and stacking them within all Nineteen Only

lead and lift.(i) Not exceeding 3 Sq.M. in area.

7 Credit Value for Door Shutter, Cupboard shutter and 36.00 No -100.00 Rupees One Hundred -3600.00

removed from site and clean site. Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

8 Providing 10mm thick cement plaster in single coat of 54.00 sqm 287.56 Rupees Two Hundred

interior plastering and finished even and smooth in cement Eighty Seven And Paise

mortar 1:3 (1 cement; 3 sand) and finishing with a floating Fifty Six Only

coat of neat cement slurry including providing and mixing

I.S.I. make water proofing material in cement mortar in

proportion recommended by the manufacturer for ALL

9 Providing CEMENT VATA ( 10 cm. x 10 cm. )size quarter 52.00 Rmt 24.04 Rupees Twenty Four And

round in cement mortar 1:1 including neat cement finishing, Paise Four Only

watering etc.complete

10 Providing and laying acrylic base (zycosil) equvivalant water 64.00 Sqm 110.70 Rupees One Hundred

proofing paint in two coats to vertical and horizontal surface Ten And Paise Seventy

of depressed portion of bath and W.C. as directed by Only

engineer -in- charge. This treatement shall be carried out

over and above water proofing cement plaster

11 suppllying and filling cinder in sunk portion for all lead and lift 8.50 Cum 791.69 Rupees Seven Hundred

tec complete Ninety One And Paise

Sixty Nine Only

12 Providing and laying ordinary Cement Concrete 1:2:4 2.50 Cum 3891.15 Rupees Three Thousand

including finishing smooth and curing complete, including Eight Hundred Ninety One

cost of formwork but excluding cost of reinforcement. For all And Paise Fifteen Only

13 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 13.50 Cum 2742.27 Rupees Two Thousand

coarse sand : 8 graded stone aggrigates of 40 mm nominal Seven Hundred Forty Two

size) curing complete excluding cost of formwork in And Paise Twenty Seven

FOUNDATION AND PLINTH. Only

14 P & L ordinary Cement Concrete Flooring 1:2:4 laid in one 179.00 Sqm 335.72 Rupees Three Hundred

layer and finished with a floating coat of neat cement. (B) Thirty Five And Paise

50mm thick. Seventy Two Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

15 Providing and laying white glazed tiles 8mm thick in flooring 9.00 Sqm 859.95 Rupees Eight Hundred

treads of steps and landing laid on a bed of 12mm thick Fifty Nine And Paise

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with Ninety Five Only

flush pointing in white cement.

16 Providing and laying white glazed tiles 8mm thick in Skirting 106.00 Sqm 1116.32 Rupees One Thousand

riser of steps and dado laid on 10mm thick cement mortar One Hundred Sixteen And

1:3 (1-cement : 3-coarse sand ) and jointed with white Paise Thirty Two Only

17 Providing and laying 25mm thick polished KOTAH STONE 30.00 Sqm 1108.30 Rupees One Thousand

SLAB FLOORING over 20mm average thick base of cement One Hundred Eight And

mortar 1:6(1 cement; 6 coarse sand) over and jointed with Paise Thirty Only

grey cement slurry including rubbing and polishing etc.

complete for All floors.

18 Provinding and laying damp Proof Suprema white on 457.63 Sqm 409.30 Rupees Four Hundred

Terrace surfaces (two Coats) Over and Above applying one Nine And Paise Thirty

coat of primer to give an Required cleanning of terrace and Only

open old vata of china mosaic after thoroughly brushing the

Surface to remove all dirt and remains of loose powdered

materials etc.complete.Primer and Damp Proof shall be

used as per approved material list of GSPHCL or Engineer

in charge.The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing for final

taste. Rate is including ten years perfomance of gurantee

bond to be given in Stamp Paper.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

19 Providing & Laying integrated cement based proprietary 105.00 Sqm 890.37 Rupees Eight Hundred

water proofing treatment of required thickness over the roof Ninety And Paise Thirty

including 10mm thick water proofing cement plaster in Seven Only

cement mortar 1:3 and CHINA MOSAIC fitting and finally

finishing the surface with white cement slurry and slopping

out terrace slab with following specification laid to required

slope not flatter than 1:80 (the thickness of water proofing

treatment near rain water outlet or the lowest point of the

finished slope shall not be less than 45mm including treating

the vertical surface of the parapet wall upto 20cms. height

above finished level of terracing including finishing top with

joint less water proofing plaster, curing, testing etc.

completed. Rate is including 10 years performance of

guarantee bond to be given on stamp paper (No extra shall

be paid for increase in thickness for proper slope)

(A) Applying and grouting a slurry coat of neat cement using

2.75 kg/Sqm of cement admixed with proprietary water

proofing compound conforming to IS-2645 over the RCC

slab including cleaning the surface before treatments.

(B) Laying cement concrete using broken bricks bats 25mm

to 40mm size with 50% of cement mortar 1:4 (1cement :

coarse sand) over 10mm thick water proofing cement plaster

in cement mortar of mix 1:3 (1cement : 3 coarse sand)

admixed with proprietary water proofing compound

confirming to IS-2645 to required slope and treating similarly

the adjoining walls upto 200mm height including rounding of

junction of walls.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

(C) After two days of proper curing applying a second coat of

(D) Finishing the surface with china mosaic pieces laid in

10mm thick joint less cement mortar of mix 1:3 (1cement :

coarse sand) admixed with proprietary water proofing

compound confirming to IS-2645 and finally finishing the

surface with trowel with neat cement slurry.

(E) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing for final test.

All above operation to be done in order and as directed and

specified by the engineer in charge.

20 Providing and applying bonding agent for grip between old & 61.00 Sqm 371.39 Rupees Three Hundred

new concrete by Sikadur 32 or its equivalent as approved by Seventy One And Paise

engineer in charge. Rates are inclusive of surface Thirty Nine Only

preparation such as cleaning surfaces. Mixing components

of Sikadur 32 together with a slow-speed electric drill with

properly designed impeller until a smooth consistency is

achieved. Mix shall be applied by brush, roller or spray.

21 Providing and applying Micro concrete in existing RCC 1.25 Cum. 62188.93 Rupees Sixty Two

members micro concrete shall be of Perma recrete - 306 or Thousand One Hundred

its equivalent from ROFF, FOSROCK, BASF or SIKKA as Eighty Eight And Paise

approved by engineer in charge (Of 60 MPA at 28 days). Ninety Three Only

Rates are inclusive of cleaning the surface, remove loose

materials, applying Sikka Rust off 100 or its euivalent to

existing reinforcement. Preparing microconcrete as per

instruction of manufacturer required form work and

scaffolding and filling microconcrete in required places etc

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

22 Providing and fixing Polyvinly cloride (PVC) Door frame of 57.00 Sqm 1449.90 Rupees One Thousand

size 50 x 47mm with a wall thickness of 5mm thick made out Four Hundred Forty Nine

of extuded 5mm rigid PVC foam sheet, mitre cut at two And Paise Ninety Only

corners and jointed with 2 Nos. of 150mm long brackets of

15 x 15mm M.S. square tube. The two vertical door profiles

are to be reinforced with 19 x 19mm M.S.squre tube of

gauge, EPDM rubbergasket weather seal to be provided

through out the rame. The door frame shall be fixed to the

wall using 65/100mm long M.S. scresws through the frame

by using PVC fasteners A minimum of 4 Nos. of screws to

be provided for horizontal member Providing and fixing

30mm thick Solid Panel PVC Door Shutter consisting of

frame made out of M.S. tubes of 19 gauge (16mm)

thickness and size of 19mm x 19mm for stiles, & 15mm x

15mm for top & bottom rails M.S. frame shall have a coat of

steel primers of approved make and manufactures M.S.

frame shall be covered with 5mm thick heat moulded.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

PVC 'C' channels of size 30 x 50mm forming stiles. and

5mm thick, 75mm wide PVC sheets for top rail. lock rail &

bottom rail on either siede, and 10mm (5mm x 2)

thick,20mm wide cross PVC sheet as gap insert for top rail &

bottom rail. Panelling of 5mm thick PVC sheet to be fitted in

the M.S. frame welded /sealed to the stiles & rails with

30mm wide x 5mm thick PVC Sheets beading on either side,

and jointed together with solvent cement adhesive etc. An

additional 5mm thick PVC strip of 20mm width is to be struck

on the interior side of the'C" Channel using PVC solvent

adhesive and stainless steel (grade 316) fixtures & fastening

4 nos. of hinges (100mm x 58mmx1.9mm)Two Nos. of

Aldrop of 200 mm x 16 mm, Stopper 150 mm x 10 mm &

Handle 125 mm long as per detail drawing etc. complete as

direction of Engineer-in-Charge.

23 Providing and fixing standared extruded of alluminium 9.00 Sqm 1163.92 Rupees One Thousand

section of size 63mm x 38.10mm x 1.2mm (Jindal Section : One Hundred Sixty Three

2434, @ Wt. 0.643 Kg/mt) with colour anodized alluminium And Paise Ninety Two

frame for ventilation with 5 mm thick frosted glass as details Only

etc complete for Ventilation

24 Providing 10 mm thick cement PLASTER in single coat on 49.00 Sqm 220.13 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Twenty And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Thirteen Only

floating coat of neat cement slurry at GROUND FLOOR

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

25 Provinding 15 mm thick cement PLASTER in single coat on 168.00 Sqm 220.46 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Twenty And Paise Forty

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Six Only

finishing with floating coat of neat cement slurry at

26 Providing 10 mm thick cement PLASTER in single coat on 49.00 Sqm 246.61 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Forty Six And Paise Sixty

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a One Only

floating coat of neat cement slurry at FIRST FLOOR.

27 Provinding 15 mm thick cement PLASTER in single coat on 167.00 Sqm 248.93 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Forty Eight And Paise

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Ninety Three Only

finishing with floating coat of neat cement slurry at FIRST

28 Providing 10 mm thick cement PLASTER in single coat on 92.00 Sqm 273.09 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Seventy Three And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Nine Only

floating coat of neat cement slurry at SECOND FLOOR.

29 Provinding 15 mm thick cement PLASTER in single coat on 490.00 Sqm 277.40 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Seventy Seven And Paise

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Forty Only

finishing with floating coat of neat cement slurry at

30 Provinding 20 mm thick SAND FACED cement PLASTER on 762.00 Sqm 339.02 Rupees Three Hundred

walls above ground level consisting 12 mm thick backing Thirty Nine And Paise

coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock Two Only

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc.

Complete for any height.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

31 Providing & fixing Bajari glass ordinary quality bedded with 32.00 Sqm 717.15 Rupees Seven Hundred

putty with oil paint after Removing old putty and cleaning Seventeen And Paise

surface and necessary cutting of Bajari glass (B) 4mm thick Fifteen Only

32 Providing, Fabricating and fixing M.S. GRILL/GATE of 544.00 Kg 75.11 Rupees Seventy Five And

approved pattern fabricated from M.S. flat, square bars, Paise Eleven Only

round bars, C - channel, box pipe as per detail Drawings.

Rate is inclusive of welding with grinding smooth surface,

two coats of Oil paint and one coat of yellow Zinc primer

coat of approved brand only. Oil paint shall be Luxol Enamel

paint of Berger Paint india limited. or asian paint apcolite

premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint and nerolac synthetics enamel

of nerolac paint for all floor and at any height only.

Structural Steel material should be used ISI marked

33 Provinding and fixing PVC SWR Nahni Trap of the following 36.00 No 580.47 Rupees Five Hundred

nominal dia. Self cleaning design with top jali and stainer Eighty And Paise Forty

including cost of cutting and making good the walls and Seven Only

floors 100mm inlet and 50mm outlet. Including 150mm x

150mm stainless steel jali.

34 Providing and fixing water closet squatting pan (Orissa type 8.00 No 1338.77 Rupees One Thousand

W.C. pan) first quality with UPVC S trap of 100 mm Three Hundred Thirty

including jointing the trap with UPVC Pipe (size 580mm X Eight And Paise Seventy

450 mm in vitreous china white colour).Rate also includes Seven Only

making holes in RCC slab / Beam and fixing the trap in

hanging position by M.S. clamps of required size fitted in

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

35 P & F to Wall Ceilling and Floor SWR Rain Water pipe as 258.00 Rmt 323.15 Rupees Three Hundred

Per IS-13592 of 90mm Dia Complete with Special fitings, Twenty Three And Paise

Compressor type Fittings, Wall clips on wooden patty Fifteen Only

including making good the ceiling and floor on terrace rain

water pipe shall be 90 mm Dia. SWR horizontal pipe and

vertical pipe and 90mm bend at the end near by Ground

level rate are Inclusive of all Necessary Fittings required.

36 Providing and fixing to wall, ceiling and floor U.PVC SWR 187.00 Rmt 264.97 Rupees Two Hundred

Soil Waste Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Sixty Four And Paise

Rate inclusive of All fittings like single or double 'Y' with Ninety Seven Only

door, reducer, coupler single 'T' with door bend, G.I. Slotted

Z patti of 16 Gauge (minimum1.60mm thick) and minimum

6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical

distance including All Labour Charges etc. complete and

making good the Wall, Ceiling and Floor.

37 Providing and fixing to wall, ceiling and floor U.PVC SWR 116.00 Rmt 495.91 Rupees Four Hundred

Soil Waste Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. Ninety Five And Paise

Rate inclusive of All fittings like single or double 'Y' with Ninety One Only

door, reducer, coupler single 'T' with door bend, G.I. Slotted

Z patti of 16 Gauge (minimum1.60mm thick) and minimum

6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical

distance including All Labour Charges etc. complete and

making good the Wall, Ceiling and Floor.

38 Provinding and fixing in position PVC COWEL VENT to pipe 16.00 No 16.47 Rupees Sixteen And

75 mm dia directed. Paise Forty Seven Only

39 Provinding and fixing in position PVC COWEL VENT to pipe 8.00 No 28.16 Rupees Twenty Eight And

110 mm dia directed. Paise Sixteen Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

40 Cleaning the Sluge of Old Septic Tank 4.00 No 12000.00 Rupees Twelve Thousand

41 Cleaning the Sluge of Old Soak Well 1.00 No 15000.00 Rupees Fifteen Thousand

42 Providing and fixing in position ISI marked Rotational 16000.00 Lit 3.91 Rupees Three And Paise

moulded Polyethylene double layer cylindrical vertical Ninety One Only

storage Tank (IS : 1270) water Tank Size including marking

inlet and outlet. Over flow and washout arrangement with

G.I. connection including using necessary M.H. for

connection etc. complete with closed cover including

applying two coats of oil painting outside the Tank etc.

43 Providing & fixing to Concealed center point to wall, ceiling 24.00 Rmt 206.73 Rupees Two Hundred Six

& floor CPVC ( SDR 13.5 ) PIPE having National Sanitation And Paise Seventy Three

foundation ( NSF ) seal for potable water of following dia Only

nominal bore tube fitting and clamps including of making

good the wall ceiling & floor etc. Complete (excavation of

earth in trenches and filling will be paid separately) (B)

44 Providing & fixing to Concealed center point to wall, ceiling 229.00 Rmt 251.31 Rupees Two Hundred

& floor CPVC ( SDR 13.5 ) PIPE having National Sanitation Fifty One And Paise Thirty

foundation ( NSF ) seal for potable water of following dia One Only

nominal bore tube fitting and clamps including of making

good the wall ceiling & floor etc. Complete (excavation of

earth in trenches and filling will be paid separately) (C)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

45 Providing & fixing to Concealed center point to wall, ceiling 128.00 Rmt 443.29 Rupees Four Hundred

& floor CPVC ( SDR 13.5 ) PIPE having National Sanitation Forty Three And Paise

foundation ( NSF ) seal for potable water of following dia Twenty Nine Only

nominal bore tube fitting and clamps including of making

good the wall ceiling & floor etc. Complete (excavation of

earth in trenches and filling will be paid separately) (E)

46 Provinding and fixing gun metal check or non return full way 8.00 No 764.00 Rupees Seven Hundred

WHEEL VALVE (E) 40 mm dia. Sixty Four Only

47 Providing and fixing Gun metal check or non-return fullway 13.00 No 416.47 Rupees Four Hundred

wheel valve.(C) 25mm dia. Sixteen And Paise Forty

48 Provinding and fixing gun metal check or non return full way 4.00 No 795.00 Rupees Seven Hundred

HANDLE VALVE 40 mm dia. Ninety Five Only

49 Providing and fixing PVC Bib Cock of Polo Brand of 15mm 98.00 No 128.66 Rupees One Hundred

Dia etc. completed. Twenty Eight And Paise

50 Repairing of Steel Casement window, Ventilation if required 122.00 Sqm 450.00 Rupees Four Hundred

necessary Z section, T Section or sech bar wind stay, Fifty Only

handle and all labour etc. Complete.

51 Major Reparing of Door, Windows shutters and frame 102.00 Sqm 321.78 Rupees Three Hundred

including refixing aligning shutters providing replacing and Twenty One And Paise

fixing alluminium anodized fitting and fixtures etc. complete Seventy Eight Only

excluding the painting as per the specification including

cutting of panel or member of rails.

52 Repairing of Inspection Chamber Brick work and Plaster if 16.00 No 500.00 Rupees Five Hundred

required inside Dimension of 610mm x 455mm and 450mm Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

53 Providing and Fixing precast RCC frame with cover MD 10 15.00 No 1702.00 Rupees One Thousand

Ton (Rubber mould finish) inner size 600 x 450 mm with all Seven Hundred Two Only

necessary fittings.

54 Constructing Brick Masonary Chamber for underground C.I 8.00 No 3793.18 Rupees Three Thousand

inspection chamber and bends with brick having crushing Seven Hundred Ninety

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab Three And Paise Eighteen

1:2:4 mix (1 cement : 2 coarse sand :4 graded stone Only

aggregate 20mm nominal size ) with 8mm dia steel at

cm. C.C and foundation concrete 1:5:10 inside plaster

15mm thick with a flotting coat of neat cement walls and bed

concrete etc. complete. Rate are also inclusive of outside

plaster 15mm thick in C.M 1:3 from top of chamber and all

side upto 45cm deep for multi Or Single purpose pipe line.

(I) Inside Dimension For inspection Chamber 455mm x

610mm & 450mm deep etc. Complete. (Rate are inclussive

with Precast RCC cover with Frame MD20 Size

55 Scrubbing of existing colour and Painting two coats ( 321.00 Sqm 115.56 Rupees One Hundred

Excluding priming coat ) on previously painted wood and Fifteen And Paise Fifty

wood based surfaces with enamel paint brushing to give an Six Only

even shade including cleaning the surface of all dirt, dust

and other foreign matter.

56 Scrubbing of existing colour and Painting two coats 370.00 Sqm 99.26 Rupees Ninety Nine And

(Excluding priming coat ) on previously painted steel and Paise Twenty Six Only

other material surfaces with enamel paint brushing to give

an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

57 Distempeing (two coats) with oil bound distemper of 1820.00 Sqm 83.20 Rupees Eighty Three And

approved brand and manufacture and of required shade on Paise Twenty Only

Ceiling surface to give an even shade, over and including a

priming coat with distemper primer of approved brand and

manufacture after thoroughly mortar droppings and other

foreign matter and also including preparing the surface

even including lapi finishing and sand papered smooth.

58 Distempeing (two coats) with oil bound distemper of 4457.00 Sqm 74.93 Rupees Seventy Four

approved brand and manufacture and of required shade on And Paise Ninety Three

wall surface to give an even shade, over and including a Only

priming coat with distemper primer of approved brand and

manufacture after thoroughly mortar droppings and other

foreign matter and also including preparing the surface even

including lapi finishing and sand papered smooth.

59 Finishing walls with Weather Proof Exterior Emulsion Paint 3307.00 Sqm 153.35 Rupees One Hundred

on Wall Surfaces (Two Coats) over and above Applying one Fifty Three And Paise

coat of Primer to give an Required shape and even shade Thirty Five Only

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials etc. complete. Primer

and Exterior Emulsion Paint shall be used as per approved

material list of GSPHCL.

60 Removing dry or oil bound Distemper by a washing and 1628.50 Sqm 13.08 Rupees Thirteen And

scraping and sand papering the Ceiling surface smooth Paise Eight Only

including necessary repairs to scratches Complete

61 Removing dry or oil bound Distemper by a washing and 7385.00 Sqm 11.42 Rupees Eleven And Paise

scraping and sand papering the wall surface smooth Forty Two Only

including necessary repairs to scratches Complete

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

62 Pro and fixing 3mm thick acrylic sheet with Vinyl letter colour- 1.00 Sqm 7193.89 Rupees Seven Thousand

2073 Dark Grey for Back ground and colour-2199 white One Hundred Ninety

letter with rrequired screws etc. as per Required sizes Three And Paise Eighty

complete etc. as per specification & Instruction of Engineer Nine Only

ELECTRICAL WORK

63A Providing & erecting Point wiring with approved ISI marked 240.00 Point 425.00 Rupees Four Hundred

1.1 KV grade 2 X 1.5 sq.mm. copper PVC insulted FRLS Twenty Five Only

wire with 1.5 sq.mm. (green) copper PVC insulated FRLS

wire for earth continuity in FIA approved ISI mark medium

class white colour 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected on brick

wall along with approved make 5/6 Amp. ISI mark modular

type switch and accessories mounted in 20 G. G.I. company

fabricated metallic box/PVC Box covered with appropriate

front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD

Connector (make & model approved by EIC and matching

colur with switches accessories) as directed for concealed

wiring Deep Junction box 75mm depth if required) (a) Light

point. Cat.-II (For Open Wiring).

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

[Length of point wiring must not increase than 10 mtr. For

that necessary switch board and their location must be

finalised before execution by agency otherwise payment will

not be done for extra long point. For future extention, if

required, agency has to erect one higher size polished

wooden box as per instruction of EIC & Wire must be

having box packing]. For Light point [conductor resistance

should be as per IS:8130/1984]

63B Secondary Light Point Cat-II. 10.00 Point 131.00 Rupees One Hundred

Thirty One Only

63C For Bell Point Cat.-II 19.00 Point 425.00 Rupees Four Hundred

Twenty Five Only

63D For Fan Point (with 6 A. Modular type switch and two 57.00 Point 612.00 Rupees Six Hundred

module hum free EME Five step type Electronic fan Twelve Only

regulator both having ISI mark) Cat.-II

63E For separate Point (with 6 Amp. Switch & 3/5 pin socket 60.00 Point 455.00 Rupees Four Hundred

both having ISI mark) Cat.-II Fifty Five Only

63F For Looped on switch board (with 6 Amp.Switch & 3/5 pin 100.00 Point 234.00 Rupees Two Hundred

socket both having ISI mark) Cat.-II. Thirty Four Only

64 Providing and erecting Medium Class FIA approved and ISI 100.00 Mtr. 24.00 Rupees Twenty Four Only

mark white colour (embossed) RIGID PVC PIPES of

following size complete erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & clamps on /

in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia.

(a) 20 mm. dia.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

65A Providing and laying Mains with FRLS PVC Insulated wire 950.00 Mtr. 62.00 Rupees Sixty Two Only

ISI marked 1.1 KV grade with FIA approved ISI mark

medium class 20/25/32 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected on

brick wall /Slab with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm.

FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing

as per standard colour code.

65B For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor 760.00 Mtr. 146.00 Rupees One Hundred

mains with 2.5 sq.mm. FRLS copper multi stranded Forty Six Only

conductor for earthing as per standard colour code.

66 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated 50.00 Mtr. 37.14 Rupees Thirty Seven And

Flexible pipe with necessary socket, PVC bushes saddle, Paise Fourteen Only

Check-nuts etc. complete of following sizes.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

67 Providing and erecting Plug Point wiring with approved ISI 76.00 Point 678.00 Rupees Six Hundred

make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with Seventy Eight Only

1.5 sq.mm (green) copper PVC insulated FRLS wire for

earth continuity in white FIA approved ISI mark medium

class 20/25/32 mm dia. embossed rigid PVC pipe with PVC

fitting with approved make white accessories with FRLS

PVC insulated wire for earth continuit with 16 Amp. ISI

marked flush type modular switch / Socket and accessories

erected on PVC / Acrylic box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. For open

wiring [a] 16 A. switch & 1 No. 6/16 A. universal socket

combined white colour suitable for 3 pin top duly. Cat.-II.

(Conductor resistance should be as per IS:8130/1984)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

68 Providing & Erecting 2.0 mtr long Earthing system by 5.00 Each 7025.00 Rupees Seven Thousand

making minimum bore of 225 mm dia in soft soil. Suitable for Twenty Five Only

doing pipe-in-pipe technology earthing.Earthing electric rod

must be made from Corrosion free Hot dip galvanizing pipes

having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D.,

ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and

gave rectangular shape so its work as a terminal.The hot

deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron

any where. SS Nut bolt:- 2 no.with washer suitable for

14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive

material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:-

ohm/meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size

of 400 mm X 400 mm X 400 mm depth and Cover should be

heavy duty cast iron with required size of 300 mm X 300 mm

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms &

voltage between neutral & Earthing upto 02 volt. Agency has

to maintain earthing & its value for one year. Earthing must

be done in the presence of A.E. (GSPHCL)]

69 For above earthing additional charges for boring in hard 5.00 Each 276.00 Rupees Two Hundred

rock soil (by breaker) & filling soft soil in earth pit (certificate Seventy Six Only

for soil have to given by DEE / AE along with photographs)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

70 Supplying and Erecting LED indoor fitting of approximately 4 65.00 Each 370.00 Rupees Three Hundred

feet long with LED of wat age 0.2W to 0.5W assemble on Seventy Only

single MCPCB with housing use as a heat sink shall be

made from Aluminum extrusion having enough strength

(sample must be approved by EIC) with polycarbonate

diffuser with following specification: (A) Company

mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz. (C) Rated input

wattage: max. 24w (D) Rated input current : 0.2 Amp, (E)

Power Factor : Min. 0.90, (F) ATHD : Max. 15% , (G) Rated

Luminous flux: Min. 2420 lm, (H) CCT: 6500K, (I) CRI: Min.

80Ra, (J) Driver Ef iciency: Min. 80%, (K) LED life span: Min.

50000 Hrs @ L70, (L) Over Voltage protection: Withstand up

to 440V/AC for 4 Hrs., (M) Surge protection : Min. 2KV, (N)

IP rating: IP 20, (O) IK rating : IK 02, (P) Short circuit , Open

circuit & Reverse Polarity Protection must be provided (Q)

Fixing clamp design & strength should be suf icient to hold

the fitting erected on wall or ceiling., (R) 3 core copper wire

of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture) [Approval will be given

strictly subject to item specification]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

71 Providing, erecting, testing Ceiling Fan confirming to IS: 38.00 Each 1929.00 Rupees One Thousand

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Nine Hundred Twenty

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Nine Only

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4)

Power Consumption: maximum 53W, (5) RPM: minimum

330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two

Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15%

Tolerance )as per is 1709-1984, Aluminium body premium

quality, Branded make,(14) Down road: up to 1.0 mtr as per

site requirment, (15) Required fixing accessories, (16)

core 0.75 sq.mm ISI wire as per site requirment, (17) No

vibration and noise due to mechanical parts. (Agency has to

erect safey wire with ceiling fan and checked with EIC)

(OEM has to approved model as per tender specification

and tested at ERDA) (Necessary test reports should be

submitted strictly at the time of approval. Sample approved

by EIC subject to above specification only)

72 Providing and erecting Polycarbonate body surface 10.00 Each 780.00 Rupees Seven Hundred

mounting LED Bulk head type 9 watt Lighting Fitting with Eighty Only

electronic driver having THD < 15%, CRI>80, P.F.0.95 And

lumen output from luminaire 720 lm, input voltage range 160-

270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver

having efficiency >=80lm/w, -20 deg C to + 60 deg C

working temperature, AL frame with Beam Angle 120 deg.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

73 Supplying & Erecting Decorative Ding Dong bell 250 Volt 19.00 Each 170.00 Rupees One Hundred

complete erected on existing polished wooden block or in Seventy Only

M.S. box with 3 mm thick white ISI mark laminated sheet.

[Anchor (Chime model), vision, rider make]

74A Providing and erecting following type of Modular Type 19.00 Each 139.00 Rupees One Hundred

Accessories mounted with 20 G G.I. company fabricated Thirty Nine Only

metalic box/PVC Box , single mounting base frame covered

with textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge. TV

Co-axial Socket outlet CAT-II

74B For Blank Plate Single Cat-II 200.00 Each 16.00 Rupees Sixteen Only

75 Providing and erecting modular type accessories mounted 19.00 Each 502.00 Rupees Five Hundred

on 20G G.I. company fabricated galvanised metal box/PVC Two Only

Box covered with approriate front plate modules erected

flushed with wall/Ceiling with 1 Nos. of 16 Amp SP Switch &

3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board] Cat II.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

76 Providing ad erecting approved make single phase Single 19.00 Each 4287.00 Rupees Four Thousand

Door metal clad D.B. as per relevant indian standards Two Hundred Eighty

ammended upto date. Seven Only

Supplying and fixing following way single phase MCB

distrubution board of company fabricated IK 09 certificate

with sheet box with powder coated inside and outside after

apply seven tank chemical process of MS sheet cover

complete with suitable integral single piece construction

tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for

mounting MCBDB. Manufacturer must be provided (1) IP

and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type

PU gasket. (2) Seven tank Powder coating Certificate (3)

Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors for

all incoming and outgoing circuits, with suitable size FRLS

PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned

copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted

including earthing etc.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Single phase incoming and horizontal single phase outgoing.

For 12 Way MCBDB: Including 40 Amp. 30 mA double pole

ELCB (ELCB confirming to IS:12640/1988 having sensitivity

of 30 mA and breaking capacity of 10 KA), MCB 40 Amp.

double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6

Amp:- 3 Nos., 16 Amp:- 3 Nos. & 25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB

to be used) (MCBDB must be erected in line & level with

spirit level and finish the external edge with box cutting

plaster) (Same colour MCB(SP/DP) should be used as same

as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement]

77 Providing & erecting 240 V MCB double pole switch for 23.00 Each 327.00 Rupees Three Hundred

motor & inductive load (C Curve) having 10 KA breaking Twenty Seven Only

capacity & confirms to IS:8828 in existing box having

following capacity. For 40 Amp.

78 Providing & erecting 415 V MCB Four Pole for Motor & 1.00 Each 730.00 Rupees Seven Hundred

Inductive Load (C Curve) having 10KA breaking capacity & Thirty Only

confirms to IS :8828 in existing box having following capacity

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

79A Supplying & fixing box for housing RCCB + MCB 23.00 Each 272.00 Rupees Two Hundred

combination made of 18 SWG sheet steel duly powder Seventy Two Only

coated with gasket, dust & vermin proof bakelite shield two

earthing terminals for following type of RCCB, RCCB + MCB

[a] For 2 pole [Same company metal box used as MCB /

ELCB used with earthing terminal with necessary Numbering

/ marking with oil Paint by painter]

79B For 4 pole [Same company metal box used as MCB / ELCB 1.00 Each 442.00 Rupees Four Hundred

used with earthing terminal with necessary Numbering / Forty Two Only

marking with oil Paint by painter]

80 Providing, erecting, fabricating the M.S. structure as per 50.00 Kg. 75.00 Rupees Seventy Five

requirement of site as per structure design Including proper Only

size approved by EIC of M.S. angles, flats, bars, square

pipe, channels, sections (Tata, Jindal, Asian, JSI Make)

complete with cutting, welding, grinding and finishing duly

painted with Asian/Nerolac make premium quality oil paint

and true care red oxide metal primer,asian paint make with

erection on site as per direction of engineer in charge with

necessary grouting cementing, plastering and finishing

complete. All hole opening of square pipe end must be

closed with M.S plate welding. Payment will be done on KG

as per Actual weight.

81 Supplying & erecting 12 mm thick backelite sheet of 5.00 Sq. Mtr. 2289.00 Rupees Two Thousand

approved make and grade on 25 x 25 x 3 mm red oxide Two Hundred Eighty Nine

painted angle iron frame suitable for fixing ICDP SWITCH Only

and energy meter (contractor shall make approved drawing

of Bakelite sheet To arrange required No. of Energy meter &

ICDP switch-busbar etc. as per Actual space available in

electrical room at site)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

82 Providing and erecting metallic vitrified danger notice board 2.00 Each 69.00 Rupees Sixty Nine Only

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

83 Providing and erecting busbar chamber confirming to IS-375 1.00 Rmt 4378.00 Rupees Four Thousand

fabricated from 16 GMS sheet dust & vermin proof having Three Hundred Seventy

hinged door with rubber gasket and necessary busbar Eight Only

supports with copper busbar having current density not more

than 1.6 amp/sqmm (Rated current per Cross Section area)

duly wired with colour insulating tape for phase sequence,

three phase & neutral Each equal & one meter long suitable

for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with

necessary incoming and outgoing connections with proper

size of copper strip/wire with lugs as directed. Suitable for

100 Amp. capacity [make and model approved by EIC

strictly as per tender specification]

84A Providing and Laying of Mains with ISI marked, 1.1 KV 100.00 Mtr. 56.00 Rupees Fifty Six Only

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 6.00 sq. mm

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

84B Providing and Laying of Mains with ISI marked, 1.1 KV 100.00 Each 141.00 Rupees One Hundred

grade electrolyte multi stranded, annealed copper conductor Forty One Only

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [g] One wire 16.00 sq. mm

85 Supplying and fixing radium sticker or Painting the number 200.00 Each 2.00 Rupees Two Only

and words for inventory Identification on erected fittings /

equipment’s or Such accessories (MCBDB, Panel, Pole,

Rack, Earthing, Pump, Door etc.) as may required with good

quality of enamelled paint or fade proof, weather proof,

waterproof high quality vinyl radium sticker for indoor /

outdoor application as directed by engineer in charge. For

one character 50 mm height.

(The colour of sticker / paint should be as per instruction

given by EIC as per site requirement)

86 Providing & Erecting 3 mm thick Polycarbonate (PC) sheet 200.00 Sq. Inch 3.00 Rupees Three Only

with grooving as directed

87 Providing & Erecting 3 mm thick acrylic Sheet with grooving 200.00 Sq. Inch 3.00 Rupees Three Only

88 Dismantling the existing light, fan, bell, independent plug 350.00 Point 1.00 Rupee One Only

point, wiring with mains of all types along with accessories

etc. complete and handed over to dept.

89 Dismantling the existing switchgears, DB and Busbar of any 18.00 Each 7.00 Rupees Seven Only

size complete with / without board or angle iron frame.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

90 Dismantling the existing ceiling fan / exhaust fan / cabin fan / 50.00 Each 9.00 Rupees Nine Only

bracket fan complete with accessories, G.I. down rod, frame

etc. and making the site clear.

91 Providing and Fixing SITC of Outdoor aesthetically designed 12.00 Each 3512.00 Rupees Three Thousand

LED Street Light Luminaire with total consumption of Max. Five Hundred Twelve

45 W with single piece die cast aluminium housing, high Only

power LED shall be mounted on high quality metal core PCB

with extremely precison designed heat sink complete with

IP66 protection Class with polycarbonate / thoughened glass

cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM

guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional

for high amibient and high humid envirnoments, THD of

driver should be less than 10% and P.F > 0.95. Also the

Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w,

and total lumens not less then 4950, CCT > 5000K, CRI >

65, beam angle 120 deg, surge immunity level at least 4 KV

integral and 10 KV non integralThe Separate Potted driver

should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is

removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The manufacturer

/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replcement Guarantee for complete

92 SITC of Outdoor aesthetically designed LED Street Light 5.00 Each 6117.00 Rupees Six Thousand

Luminaire with total consumption of Max. 90 W with single One Hundred Seventeen

piece die cast aluminium housing, high power LED shall be Only

mounted on high quality metal core PCB with extremely

precison designed heat sink, complete with IP66 protection

Class, with polycarbonate / toughened glass cover. The

fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with LED

minimum 130 lumen/watt with toughen glass, L70 at

hrs, provided with high quality polycarbonate lenses for

better light distribution.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional

for high amibient and high humid envirnoments, THD of

driver should be less than 10% and P.F > 0.95. Also the

Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w,

and total lumens not less then 9900, CCT > 5000K, CRI >

65, beam angle 120 deg, surge immunity level at least 4 KV

Integral & 10 KV Non Integral. The Separate Potted driver

should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is

removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The

manufacturer/authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee

for complete Fixture))

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

93 Providing & erecting bracket consisting of ISI mark "B" class 17.00 Each 487.00 Rupees Four Hundred

G.I. Pipe 4.2 cm outside diameter complete with suitable G.I. Eighty Seven Only

Sleeve tubing of 2 mm. thick and required size and length

suitable for 76.5 / 80 mm. required size of pole top or pipe in

pipe surface for wall/terrace as per instruction of EIC or wall

/terrace bracket as per instruction of EIC having nuts and

bolts for fixing the brackets and having spread of Upto

mtr. length with suitable rise as per site condition and

suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of yellow zinc and two coats

of alluminium paint for Single arm bracket suitable for pole

or terrace as per design given by EIC (a) For single arm

bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica Only) (Test

certificate to be submitted)

94 Supplying & erecting approved make SMC press moulded 17.00 Each 890.00 Rupees Eight Hundred

composite FRP. loop-in, loop-out approx. 2mm thick box Ninety Only

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(A) 300mm x

200mm x 100mm [deep]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

95 Providing & laying HDPE Double walled corrugated pipes 100.00 Mtr. 117.00 Rupees One Hundred

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Seventeen Only

minimum load required of 450N capacity with anti rodent

and ultra violet material properties with necessary

connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the

same to make ground as per original. (A) For Outer dia.

mm and Inner dia. 38 mm. ) (Test Certificate to be

96 Providing & erecting XLPE (IS:7098) (I)-88 ISI marked 300.00 Mtr 361.00 Rupees Three Hundred

armoured Copper cable for 1100 volt to be laid 90 cms. Sixty One Only

Under ground or to be laid on wall with suitable G.I. heavy

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of

cables. (B) 4 core 4 Sq. mm.

97 Providing & fixing double compressed heavy duty flange 47.00 Each 43.00 Rupees Forty Three Only

type brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm.

(Sigma, MCI, Comet Make Only)

98 Providing and Fixing Of Solderless crimping type Copper 200.00 Each 8.00 Rupees Eight Only

lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in

an approved manner. [a] 1.5/2.5 to 6 Sq.mm

99 Providing & Erecting Flexible PVC insulated multistrand 90.00 Mtr. 46.00 Rupees Forty Six Only

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. 3 core 1.5 sq.mm. PVC

insulated round copper wire ISI mark.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

100 Providing & Erecting Universal Astro 5 KVA intelligent 2.00 Each 12895.00 Rupees Twelve Thousand

streetlight control system insu with weather proof box for Eight Hundred Ninety Five

outdoor application. (As per specification attached Only

separately) (Make and model approved by EIC)

Contractors Signature