Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC | ₹13.4 L Quoted ₹14.3 L | L1 | Accepted-AOC L1 |
| 2 | L2₹16.0 LRejected-Finance 115 WARD NO 11 NEAR BY GODHARAM DHARAMSHALA FEROZEPUR JHIRKA 122104 | FEROZEPUR JHIRKA | NUH | HARYANA | 122104 | ₹16.0 L | L2 | Rejected-Finance Higher |
| 3 | Not Admitted-Fee/PreQual/Technical H NO 462 16 GALI NO 2 GANDHI NAGAR GANAUR 131101 | SONIPAT | HARYANA | 131101 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | The Deepanshu Coop. L&C Society Ltd. L1 | The Ram Singh Coop L And C Society Ltd Ferozepur Jhirka L2 |
|---|---|---|---|---|---|
| 1.00 | Cutting of MS Sheet having size 8`*4` thickness of sheet 1.00 to 1.5 mm with CNC laser cutting machine in required design/ size or as desired by engineer-in-charge. | 55 | per | 907 ₹49,885 | 999 ₹54,945 |
| 2.00 | Provinding and Supplying of MS Sheet having thickness between 14 and 16 gauge. | 55 | Per Kg. | 65 ₹3,575 | 80 ₹4,400 |
| 3.00 | 3D Painting on M.S sheet having size 8`*4` thickness of sheet between 1mm and 1.5 mm design as desired by engineer in charge. | 161.72 | Sqm of face area | 1,850 ₹3.0 L | 2,100 ₹3.4 L |
| 4.00 | Design for cutting of M.S Sheet as desired by Engineer in charge for CNC laser machine. | 2 | Each | 8,000 ₹16,000 | 11,000 ₹22,000 |
Tender Value
₹12.9 L
EMD Value
₹30,000
Closing Date
18 Feb 2026, 9:00 amClosed
AJAY NIRALA
Muncipal Corporation Sonipat
Covering of unpleasant view of drain no.6 on bus stand culvert MC Sonipat.
2026_HRY_501702_1
2026A44FEEB5 2330 4362 A63B C3671011B50C292ULB
Open Tender
Civil Works
100 days
Sonepat
All skilled and unskilled works costing up to 1 crore will be reserved for Cooperative Labour and Construction Societies at the rates approved for similar works in the recent past, through tenders within the concerned PWD circle
2 documents required · 2 mandatory
₹1,000
₹30,000
Yes
20 Mar 2026
10 Feb 2026
18 Feb 2026
10 Feb 2026
18 Feb 2026
10 Feb 2026
Cutting of MS Sheet having size 8`*4` thickness of sheet 1.00 to 1.5 mm with CNC laser cutting machine in required design/ size or as desired by engineer-in-charge.
Provinding and Supplying of MS Sheet having thickness between 14 and 16 gauge.
3D Painting on M.S sheet having size 8`*4` thickness of sheet between 1mm and 1.5 mm design as desired by engineer in charge.
Design for cutting of M.S Sheet as desired by Engineer in charge for CNC laser machine.
Percentage BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
[13.30.2]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 2. Hot finished seamless type tubes [Through Rate]
[6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate]
[9.32.2]Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated `J` or `L` hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2. 2 mm thick flat [Through Rate]
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
BOQ_580343.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid