General-Govt College of Teacher Education Thiruvananthapuram office renovation-Civil work

Amount

Maintenance

15.39.1:Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Upto 10 mm thick

14.83:Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

12.52.3:Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.

OD25797/2024-2025:Providing and fixing powder coated aluminium American handle 150 mm with SS screws etc. complete as per direction of Engineer-in-Charge. Powder coating minimum thickness 50 micron

21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete

9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

11.49.2:Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

11.48.2:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD25891/2024-2025:Engaging Carpenter for wood work.

OD25893/2024-2025:Coolie for various works

OD27162/2024-2025:Providing and fixing 70mm thick modular type workstation partitions, verticals are provided at suitable intervals with a maximum of 900mm with powder coated solid aluminium block and are fixed in ground using fischer and screw.- panel tile based construction contained within powder coated aluminium trims. The top panel are made of 8 mm thick plain glass and bottom panels are made of 9mm thick plywood laminated with 1 mm suede finish laminates fixed on both sides of frame. The partition to be provided with two level raceways for conduits, one at skirting level and and one above table top level for running power, network and telephone cable with necessary machine cut and properly filled slots. The raceways are made CRCA sheets. Necessary poles and cantilevers capable of 2/3/4 way pole connection if necessary. All trims to be powder coated finish. All materials are to be scratch and fire proof, all works are as per approved design and colour decided by engineer in charge.

OD27817/2024-2025:Supplying, fabricating and fixing workstation tables as per the following specifications: 1) Size of main table: 1500mm L x 600mm W x 750mm H ) Size of credenza: 900mm L X 450mm W X 750mm H. Structure and finishing: Top side panel are made of 25 mm Marine Ply and rest are made of 16mm Marine Ply Finishing: All surface were finished with 1mm laminate of (suede finish). Laminates are fixed to plywood by machine pressing. Edges: All exposed edges are banding with best quality PVC edge band of 2mm thick. Fittings: Drawers are fixed by good quality stainless steel heavy duty telescopic channel of 350 mm length, lock, handle, cable manager and bushes are to be fixed as per the approved drawings including keyboard tray, foot rest and cpu platform. The rate of table including all material, labour and carriage charges etc complete.

OD27818/2024-2025:Providing and fixing storage of size 2100x400x750mm, Top 25mm thick BWP Marine ply with 1mm laminate (suede finish)and all others are of 16 mm thick BWP Marine ply with 1mm laminate (suede finish) with all sides edge banding etc complete as per the direction of the department officer. Including necessary locks, autoclose hinges,handle and bushes etc complete. ( All exposed sides are edge banded with pvc edge banding tape and Plywood both side machine pressed)

OD27819/2024-2025:Supplying, fabricating and fixing Typist/OA workstation tables as per the following specifications: 1) Size of main table : 900mm L x 600mm W x 750mm H Structure and finishing : Top side panel are made of 25 mm Marine Ply and rest are made of 16mm Marine Ply Finishing : All surface were finished with 1mm laminate of (suede finish). Laminates are fixed to plywood by machine pressing. Edges : All exposed edges are banding with best quality PVC edge band of 2mm thick. Fittings : cable manager and bushes are to be fixed as per the approved drawings including keyboard tray, foot rest and cpu platform. The rate of table including all material, labour and carriage charges etc complete. "

OD27820/2024-2025:Providing and fixing OA side storage of size 1500x450x1200mm, Top 25mm thick BWP Marine ply with 1mm laminate (suede finish)and all others are of 16 mm thick BWP Marine ply with 1mm laminate (suede finish) with all sides edge banding etc. complete as per the direction of the Engineer in charge.(Three shutters, three racks horizontally) Including necessary locks, handle and bushes etc. complete (All exposed sides are edge banded with PVC edge banding tape and Plywood both side machine pressed).

RATHEESH D (BID ID -2352001)

Biju Nair (BID ID -2354090)

SIDHIKH A (BID ID -2353844)

Bidder Name

RATHEESH D

Johny John j k

SIDHIKH A

Biju Nair