CONSTRUCTION OF ORNAMENTAL JHONPA WORK AT NAGAR VAN SANGOD

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : 1. ordinary rock Ch –B-1, Item No. 1.9.1,

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (1 cement : 4coarse sand : 8 graded stone aggregate 40mm nominal size). Ch –B-3, Item No. 3.1.6,

Random Rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in C.M 1:6 Ch_B-6_Item No - 6.1.6 Page no.: 45

Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand.

Random rubble dry stone Kharanja under floor. Ch –B-11, Item No. 11.26, Page No.48

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Ch –B-3, Item No. 3.1.2,

Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M20 grade Nominal Mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). Ch –B-3, Item No. 3.12.1

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. Ch B-4 item 4.10.2

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Columns, pillars, posts and struts etc. . Ch B-4 item 4.10.3

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)( C) Thermo-mechanically Treated bars (Conforming of relevent IS code) Ch 4- Item 4.13.3