RRC OF WOODWORK, GRP AND BOAT HULL REPAIR ONBOARD IN SHIPS FOR A PERIOD OF THREE YEARS

(ALL JOB SERIALS ARE FOR 03 YEARS) (REPAIRS PERTAINING TO WOOD & CARPENTRY) REPAIRING OF WOODEN STATE BOARD WITH SUNMICA, CLOTH, WOODEN BEADING AND POLISHING, SIZE - 4FT X 4FT

REPAIRING OF WOODEN STATE BOARD WITH SUNMICA, CLOTH, WOODEN BEADING AND POLISHING, SIZE - 4FT X 2FT

REPAIRING OF WOODEN STATE BOARD WITH SUNMICA, CLOTH, WOODEN BEADING AND POLISHING, SIZE - 2FT X 2FT

REPAIRING OF WOODEN STATE BOARD WITH SUNMICA, CLOTH, WOODEN BEADING AND POLISHING, SIZE - 1FT X 1FT

REPAIRING OF WOODEN KEY BOARD WITH DOORS, HINGES, LOCKING ARRANGEMENTS WITH GLASS, SIZE - 1FT X 1FT

REPAIRING OF WOODEN KEY BOARD WITH DOORS, HINGES, LOCKING ARRANGEMENTS WITH GLASS, SIZE - 2FT X 2FT

REPAIRING OF WOODEN QUARTER MASTER TABLE WITH SUNMICA BEADING AND POLISHING

REPAIRING OF WOODEN TROPHY CUPBOARD WITH PERSPEX SHEET CLOTH, POLISHING AND GLASS, SIZE - 5FT X 3FT

REPAIRING OF WOODEN TROPHY CUPBOARD WITH PERSPEX SHEET CLOTH, POLISHING AND GLASS, SIZE - 4FT X 2FT

REPAIRING OF WOODEN TROPHY CUPBOARD WITH PERSPEX SHEET CLOTH, POLISHING AND GLASS SIZE - 3FT X 3FT

REPAIRING OF SINGLE SEATER SOFA WITH CUSHION AND CLOTH

REPAIRING OF WOODEN DINNING TABLE WITH SUNMICA TOP, WOODEN BEADING AND POLISHING, SIZE - 6FT X 3FT

REPAIRING OF WOODEN CUTLERY CUPBOARD WITH SUNMICA, BEADING, HINGES, LOCKING ARRANGMENT AND POLISHING SIZE 4FT X 3FT

REPAIRING OF SOFA CUM BED WITH SUNMICA, BEADING, FOAM, CLOTH, HINGES AND POLISHING

REPAIRING OF SHIP WOODEN BROW WITH STEPS AND WHEEL, SIZE - 10FT X 3FT

REPAIRING OF LIFEBUOY STAND WITH WOOD PERSPEX SHEET AND POLISHING

REPAIRING OF WOODEN GRATING, SIZE - 6FT X 3FT X 1.5FT

REPAIRING OF WOODEN OFFICERS STATE BOARD AT GANGWAY WITH SUNMICA, BEADING, STICKERING AND POLISHING, SIZE - 3FT X 2FT

REPAIRING OF WOODEN RADIO HAZARD BOARD WITH SUNMICA, BEADING, STICKERING AND POLISHING, SIZE - 3FT X 2FT

REPAIRING OF WOODEN GANGWAY DAILY STATE BOARD WITH SUNMICA BEADING, STICKERING AND POLISHING, SIZE - 3FT X 2FT

(FRP, RIB, WOOD WORKS & FUEL TANK REPAIR WORKS OF BOATS) PATCH REPAIR BY GRP/FRP USING APPROVED CHOPPED STRAND MAT, WOVEN ROVING MAT AND SURFACE FINISH MAT TOGETHER WITH APPROVED POLYSTER RESIN, HARDNER, ACCELERATOR, CATALYST, PIGMENT AND GRP FRP PUTTY/ CHALK POWER TO A THICKNESS 3MM FOR EACH COAT, REPAIRS INCLUDES SURFACE PREPARATION, REMOVAL OF OLD GRP/FRP LAYER , PAINT, GREASE, OIL DUST AND ANY OTHER FOREIGN PARTICLES

PAINTING OF GRP/ FRP WITH APPROVED POLYURETHANE GRP/FRP PAINT TO A THICKNESS 50 MICRONS EACH COAT. PAINTING INCLUDES SURFACE PREPARATION, REMOVAL OF OLD PAINT, GREASE, OIL, DUST AND ANY OTHER FOREIGN PARTICLES.

APPLICATION OF GEL COAT USING APPROVED POLYSTER RESIN, ACCELERATOR, HARDENER, CATALYST, PIGMANT AND GRP/FRP PUTTY /CHALK POWER FOR REPAIR OF HULL OR STRUCTURE. REPAIRS INCLUDES SURFACE PREPARATION, REMOVAL OF PAINT, GREASE, OILDUST ANY OTHER FOREIGN PARTICLES.

REMOVAL FITMENT OF RUBBER FENDER OF SMBS

REMOVAL OF RUBBER GUNWHALE INCLUDING FASTENERS OF SMB (SURVEY MOTOR BOATS)

RENEWAL OF RUBBER GUNWHALE INCLUDING FASTENERS OF OTHER BOATS

RENEWAL OF SS FASTENERS OF VARIOUS SIZES (BELOW 3 INCH)

RENEWAL OF SS FASTENERS OF VARIOUS SIZES (BELOW 6 INCH)

(RUBBER INFLATABLE COLLAR AND HULL ATTACHMENTS OF RIBs/ GEMINI) REPAIR OF RUBBER INFLATABLE COLLER OF 460 MM DIA MAT- HYPALON RUBBER (OUTER SURFACE) & NEOPREANE RUBBER ( INNER SURFACE) FABRIC RUBBER MOULDING FOR AIR TIGHT OPERATION. PRESSURE TESTING ON COMPLETION OF REPAIR

CONES - REPAIR OF END CONES MOULDING ADHESIVE AND REINFORCEMENT OF HARD RUBBER ENDS FOR GEMINI (SIZE - 1FT X 2FT)

CONES- REPAIR OF END FLAT CONES MOULDING ADHESIVE AND REINFORCEMENT OF HARD RUBBER ENDS FOR RIBS (SIZE - 1FT X 2FT)

RENEWAL OF STOWAGE POCKETS WITH COMPATIBLE RUBBER LINING FABRIC (SIZE - 6 INCH X 6INCH)

RENEWAL OF CARRYING HANDLES INCLUDING FITMENT WITH THE HELP OF VULCANIZING MOULDING

LIFE LINE SECURING RINGS-REPLACEMENT AND REINFORCEMENT WITH COLLAR. MAT-SS DIA 75MM

RENEWAL OF GRAB LIFE LINE WITH POLY PROPYLENE ROPE 12 MM DIA

RENEWAL OF STAINLESS STEEL BUCKLES AND SUITABLE NYLON STRAPS OF 2 INCH WIDTH 40 INCH LONG

RENEWAL OF MID SHIP RUBBING STRIP OF 150MM WIDTH AND 02 MM THICK OF COMPATIBLE RUBBER

REPAIRS OF INFLATABLE COLLAR USING ONLY ADHESIVE

REMOVAL AND SECURING OF RUBBER COLLAR WITH HULL WITH THE HELP OF ADDITIONAL FABRIC INSIDE AND OUTSIDE (SIZE 5 INCH INSIDE) WITH ORGINAL FLAT BAR AND NEW STAINLESS STEEL SCREWS

REMOVAL AND SECURING OF RUBBER COLLAR WITH HULL WITH THE HELP OF ADDITIONAL FABRIC INSIDE AND OUTSIDE (SIZE 5 INCH INSIDE) WITH NEW ALUMINIUM FLAT BAR AND STAINLESS STEEL SCREWS

REMOVAL AND SECURING OF RUBBER COLLAR WITH HULL WITH THE HELP OF ADDITIONAL FABRIC INSIDE AND OUTSIDE (SIZE 5 INCH INSIDE) WITH NEW STAINLESS STEEL FLAT BAR AND STAINLESS STEEL SCREWS

RENEWAL OF NRV/ FILLING OF VALVE RUBBER INFLATABLE COLLAR AND AIR TIGHT REINFORCEMENT WITH COLLAR

RENEWAL OF RELIEF VALVE OF RUBBER INFLATABLE COLLAR AND AIR TIGHT REINFORCEMENT WITH COLLAR

RENEWAL OF FAIRLEAD WITH HELP OF GRP RUBBER ADHESIVE. MAT - SS 316

RENEWAL OF HANDLES WITH THE HELP OF GRP RUBBER ADHESIVE. MAT - SS 316

RENEWAL OF CLEATS WITH THE HELP OF GRP RUBBER ADHESIVE. MAT - SS 316

RENEWAL OF LASHING HOOKS WITH THE HELP OF GRP RUBBER ADHESIVE. MAT - SS 316

RENEWAL OF BOLLARDS WITH HELP OF GRP RUBBER ADHESIVE. MAT -SS 316

RENEWAL OF HANDRAILS WITH THE HELP OF GRP RUBBER ADHESIVE. MAT - SS 316

FITMENT OF RUBBER COLLAR TO TRANSOM BOARD WITH HALF ROUND GRP FLAT BAR AND ADHESIVE

RENEWAL OF BOAT SEAT, UPHOLESTRY, SPONGE AND BASE PLYWOOD OF 18MM THICK, MARINE COVER SIZE 1.5 MTRX0.75MTRX15CMS

RENEWAL OF GRP FRP MOLDED SINGLE SEAT OF APPROVED COLOR MAKE AND SECURING TO DECK WITH HELP OF GRP FRP STRONG BRACKETS

RENEWAL OF PERSPEX SHEET WIND SCREEN WINDOW SCREEN

STITCHING OF SEAT CUSION REXINE COVERS

STITCHING OF SEAT CUSION CLOTH COVERS

STITCHING OF CANOPY COVER WITH WATER PROOF PVC NYLON

RENEWAL OF GRAB LIFE LINE WITH NYLON ROPE OF 10 TO 12 MM DIA

MNUFACTURING AND FITMENT OF GRP BATTEN UPTO 5CM WIDE AND 6 TO 8 MM THICK

FLOOR BOARD OF TRANSOM WOODEN MAT: MARINE PLY WOOD WATER PROOF 18MM THICK

REPAIR OF FLOOR FABRIC COMPATIBLE TO THE GEMINI CRAFT MATERIAL

RENEWAL OF KEEL BLOCKS WOODEN (MATERIAL TEAK WOOD) OF GEMINI

RENEWAL OF LASHING CLEATS OF GEMINI

RENEWAL OF RUBBER DRAIN PLUGS (DIA - 2 INCH)

RENEWAL OF POLYURETHENE FOAM IN BUOYANCY CHAMBERS OF RIBS

(REPAIRS PERTAINING TO MISCELLANEOUS FITTINGS OF BOATS) REPLACEMENT OF NAVIGATIONAL LIGHT FITTINGS ON GRP/FRP BOATS

RENEWAL OF POLISHED SS NAVIGATIONAL LIGHT FRAME WITH END FLANGES AND FASTENERS (SIZE- UPTO 02 INCHES)

RENEWAL OF POLISHED SS NAVIGATIONAL LIGHT FRAME WITHOUT END FLANGES AND FASTENERS (SIZE- UPTO 02 INCHES)

REPAIRS REPLACEMENT OF WIRING ON GRP/FRP BOATS

REPAIRS REPLACEMENT OF SWITCHES ON GRP/FRP BOATS FOR NAVIGATIONAL LIGHTS

REPAIRS TO SS FUEL TANK OF RIB BY WELDING

REPAIRS TO SS FUEL TANK OF RIB BY RENEWAL OF PLATE

REPAIRS TO AL FUEL TANK OF RIB BY WELDING

REPAIRS TO AL FUEL TANK OF RIB BY RENEWAL OF PLATE

PRESSUER TESTING OF FUEL TANK OF RIBS

REMOVAL OF COMPLETE DECK, CLEAN VOID SPACES, FILL POLYURETHANE FOAM AND RELAY THE NEW DECK (4.7M RIB)

REMOVAL OF COMPLETE DECK, CLEAN VOID SPACES, FILL POLYURETHANE FOAM AND RELAY THE NEW DECK (6.5M RIB)

REMOVAL OF FUEL TANK, CLEAN AND REFIT. JOB INVOLVES CUTTING OF DECK, REMOVAL OF TANK, FITMENT OF TANK POST CLEANING & RELAYING OF DECK (4.7M RIB).

REMOVAL OF FUEL TANK, CLEAN AND REFIT. JOB INVOLVES CUTTING OF DECK, REMOVAL OF TANK, FITMENT OF TANK POST CLEANING & RELAYING OF DECK (6.5M RIB)

THE CONVERSION OF PRIMARY SECURING OF RIB COLLAR FROM PASTING TO SCREW TYPE. THE JOB INVOLVES COMPLETE REMOVAL OF COLLAR, MODIFICATION ON HULL AND FITMENT OF COLLAR WITH SS FLAT BAR ON EITHER SIDE (4.7M RIB)

THE CONVERSION OF PRIMARY SECURING OF RIB COLLAR FROM PASTING TO SCREW TYPE. THE JOB INVOLVES COMPLETE REMOVAL OF COLLAR, MODIFICATION ON HULL AND FITMENT OF COLLAR WITH SS FLAT BAR ON EITHER SIDE (6.5M RIB)

Vignesh Marine Technical Services Pvt Ltd

ACB TECHNOLOGIES