Refurbishment / Renovation of Old Accounts Building

PART-A ( CIVIL WORKS)

Providing and fixing premium quality Vitrified tiles (Double Charged) of size 600X600X 10mm in floors & skirting with water absorption less than 0.08% and conforming to IS : 15622, of approved make KAJARIA/CERA/SOMANY/JOHNSON or Equivalient, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., includes the cost of Cement (OPC 53grade - ACC, Ultratech, Nagarjuna, & Jaypee) & all materials complete all as directed.

Providing and fixing premium quality Out door tiles for floors & skirting with water absorption less than 0.08% and conforming to IS : 15622, of approved make KAJARIA, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., includes the cost of Cement (OPC 53grade - ACC, Ultratech, Nagarjuna, & Jaypee) & all materials complete all as directed.

Providing and fixing of false ceiling with 600 x 600 mm tiles of 18 mm thick mineral fiber boards of Armstrong make using hot dipped heavy duty galvanised steel sections of M/s Armstrong world Industries, exposed surfaces with precoated capping, main Tee of size 24x 32 mm, cross tee of 24 x 27 mm, sub cross Tee of 24 x 25 mm and wall angle of 19 x 19 mm fixed to periphery of walls. The grid shall be suspended from ceiling with 6 mm dia MS rods & level adjusting J bolts system at 1200 mm c/c etc., complete. (Quoted rate inclusive of removing of old false ceiling and hand over to disposal section)

(a) Armstrong Ultima

(b) Armstrong Classic

(c) Armstrong Armgyp

Apply two (2) Coats of Premium quality Acrylic Interior Emulsion of required shade to wall surfaces from approved brands Asian Paints (Royale Shine), Berger (Silky Luxury) as specified by Engineer-incharge including necessary scaffolding etc., complete all as directed.

Apply two (2) Coats of Premium quality Exterior Emulsion of required shade to wall surfaces from approved brands Asian Paints (Matt royal), Berger as specified by Engineer-incharge including necessary scaffolding etc., complete all as directed.

Scrapping and cleaning of old paint surface before painting by mechanically (buffing machine) and applying two (2) coats of putty of approved brands Birla / JK to internal wall surfaces up to 3 floors height including applying suitable primer on old wall surface. (Putty shall be finished till a smooth and even surface is achieved) complete all as directed.

Construction of Brick work with common burnt clay F.P.S (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 Cement : 6 coarse sand) including cost of cement (PPC - Ramco) and all materials etc., complete.

Providing 15mm thick cement plastering of Mix 1:6 for birck work / RR wall etc., including necessary scaffolding, labour cement etc., complete all as directed.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) for Doors, windows and partitions to enclosures with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS. 733 and IS. 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e., at top, bottom, and sides with required EPDM rubber / neoprene gasket etc., the sections shall be smooth, rust free, straight , mitred and jointed mechanically where-ever required including cleat angle, Standard window partition glass, powder coated alluminium snap beading for glazing / paneling, C.P.Brass / Stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge/ HSL. For shutters of doors with aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, hinges, washers, cleats, weather silicone sealant, backer rods etc. where-ever required including the cost of EPDM rubber / neoprene gasket required with clear/ frosted glass panels of 5mm thickness complete all as directed. (quoted rate including removal of damaged alluminium doors & windows etc.,)

Providing & fixing UPVC 3 track sliding windows with 5mm thick forsted toughened glass shutters of 2 Nos and One no of mosquito mesh with SS304 shutter with locking arrangements of approved make Kommerling / Deceuninck / NCL / Aparna Venster or equivalent including all accessories etc., complete all as directed

Supply and Fix the fabric vertical venetian blinds of approved make Jacobs / Vista including connected extruded aluminium head rails and all accesories etc., complete

Supply and providing 35mm thick Teak Wood door shutter including frame (chaukhat) and all necessary fittings, complete all as directed. (Size 1.5m x 2.1m approx.)

Supply and providing 35mm thick Flush Wooden door shutter including fittings of make KALPATHARU complete all as directed. (Size - 1m x 2.1m approx.)

Providing laminated veneer lumber confirming to IS :14616 and TAD -15: 2001 (PartB) in factory Made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing on position with hold fast lugs or ith dash fasteners of required dia & length (hold fast lugs or dash fasteners shall be paid for seperately.)

Providing and fixing 1st quality anti-skid floor tiles & Glazed wall tiles in toilets & wash rooms of 10mm thick (edge cut) of size 300mmx600m (Concept) conforming to IS : 15622, of KAJARIA/CERA/SOMANY/JOHNSON make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chipping of existing Floor tiles, wall tiles & prepartion with one layer of CM of 1:5)

Providing and fixing white vitreous china flat back lipped front urinal basin of make Parryware or Hindware of 430x260x350 mm with G.I clamps, 32mm dia PVC waste pipe, 15mm dia PVC polythene connector including Jaquar or its equivalent fittings and brackets, cutting and making good the walls and floors wherever required etc., complete. (Item includes removal of old damaged urinal basin and handed over to CE dept.,)

Providing and fixing white vitreous china urinal partition of make Parryware / Hindware of required size with G.I clamps including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete (Item includes removal of old damaged urinal partitions and handed over to CE dept.,)

Supply, fixing and glazed vitreous china wash basin 550X400mm Size of Parryware / Hindware make with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Jaquar or its equivalent approved make pillar tap & Angle cock, 32mm dia Chromium plated heavy duty approved waste fittings, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete. ((Item includes removal of old damaged Wash basin and handed over to CE dept.,)

Supply, fit and fix white glazed earthenware European type water closest (EWC) of Parryware / Hindware make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat cover with low level cistern of 10 litres capacity of same make as specified including all Jaquar / Hindware fittings shall be provided complete all as directed. (Item includes removal of old damaged EWC and handed over to CE dept.,)

Providing Chrome plated brass Health faucet including 1.5m flexible pipe of approved make Parry ware / Hindware or its equivalent including all accessories etc., complete all as directed.

Supply and providing UPVC Nano - trap of make sudhakar or supreme with grating complete all as directed.

Supply and providing Stainless steel Long neck tap in bathrooms etc., of make Parryware / Hindwrare or its equivalent complete all as directed.

Supply and providing SS Paper Roll Holder in bathrooms etc., of make Parryware / Hindwrare or its equivalent complete all as directed.

Supply and providing SS Towel Rod in bathrooms etc., of make Parryware / Hindwrare or its equivalent complete all as directed.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of size 610X510 mm bowl depth 200mm as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required etc., complete (Nirali / Anjali / Parryware make)

Providing and fixing of 100 mm X 100 mm dia PVC Gully Trap all as directed.

Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete

Supply and providing Stainless steel Short neck tap in bathrooms etc., of make Parryware / Hindwrare or its equivalent complete all as directed.

Supply and providing Stainless steel in Soap Dish bathrooms etc., of make Parryware / Hindwrare or its equivalent complete all as directed.

Supply and providing Stainless steel in Coat Hook bathrooms etc., of make Parryware / Hindwrare or its equivalent complete all as directed.

Providing and fixing 15 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astral including fittings and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Item includes removal of old damaged pipe lines and handed over to CE dept.,)

Providing and fixing 20 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astral including fittings and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Item includes removal of old damaged pipe lines and handed over to CE dept.,)

Supply of 50 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete. (Item includes removal of old damaged pipe lines and handed over to CE dept.,)

Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete. (Item includes removal of old damaged pipe lines and handed over to CE dept.,)

Supply of 110 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete. (Item includes removal of old damaged pipe lines and handed over to CE dept.,)

Supply of 160 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete. (Item includes removal of old damaged pipe lines and handed over to CE dept.,)

Providing Two (2) coats of synthetic enamel paint over a coat of primer for Door & Window grills, Steel Structures, Purlins, frames and etc., of approved brands like Asian / Berger / Nerolac, complete all as directed.(After removing the old paint by using buffing machine and apply 2 coats of wood putty to give smooth surface to frames)

Supply and providing Stainless Steel hardware of 150mm dia Butt hinge for door

Supply and providing Stainless Steel hardware of 150mm long Tower bolt for door

Supply and providing Stainless Steel hardware of 150mm door stopper

Supply and providing Stainless Steel hardware of 150mm long Handle for door

Supply and providing Stainless Steel hardware of 300mm long Aldrop for door

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for black Granite platforms as per requirement, approved shade, colour and texture including Providing edge moulding and machine polishing to edge to give high gloss finish etc. laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and laying reinforced cement concrete work in design mix of M25 grade in foundations, beams, columns, waist slab, sunshades etc. wherever required. (Design mix should be submitted by vendor at the time of execution with laboratary report) excluding the cost of centering, shuttering and reinforcement but including cost of Cement (OPC 53 Grade-UltraTech, ACC, Nagarjuna & KCP) and all other materials & men etc., complete

Supply and providing HYSD bar reinforcement of Fe-500D grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed

Providing water proof MS / Wooden centering and shuttering including strutting, propping for lintels and slabs and whereever specified etc., including removal of form work complete etc., complete

Dismantling/ Removal/ Shifting/ Site Clearance of Old damaged wooden Partions, Battens, existing doors & windows (including frames), ventillator and etc., from OAB. Handed over the servicable items to Civil Engineering dept., and dispose the un-servicable material to 50M lead complete all as directed by HSL

Disposal of debries, surplus excavated earth, wooden scrap, garbage and rubbish outside the HSL premises to private dumping yard up to 20Km lead (not to dump in HSL colony dumping area & surrounding areas) it is the responsibility of the firm to ensure no objection shall be raised by Muncipal authorities / from any bod. If any dispute arises the agency has to sort out at their own risk etc., complete all as directed.

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.

Providing waterproofing treatmnet for toilet flooring with brick bats of CM(1:4) and applying Brush Bond two coats to walls complete all as directed. (Dismantling, chipping work is in contractor scope)

Dismantle/ Removal of Existing all kinds of roof sheets, ridges, exhaust fans and damaged purlins manually/ by mechanical means above 5m height including stacking of serviceable material and disposal of unserviceable material as per direction of Engineer-in-charge.

Supply and fixing of pre coated, Trapezoidal profiled Galvalume Roofing sheets including ridge (Size,shape and pitch of corrugation as approved by Engineer-in-charge) with total coated thickness (TCT) of 0.50mm above 5m height. Zinc Aluminium alloy coating AZ 150 as per IS27/ASTM 1379 in 550Mpa steel grade, painted with Silicon Modified Polyster 18-22 microns on top 5-8 microns Eproxy primer at bottom side of the sheet from Jindal / Bushan Steel . The sheet shall be fixed using J/ L Hook/ self drilling / self tapping screws of size 5.5mmX55mm @500mm c/c along the length of the purlins and wherever specified by engineer with EPDM seal of make CORRO SHIELD/ BUILTEX/ HILTI. (Quoted rate shall inclusive of end and side laps of sheet, tape, sealer, closures and closing of gap between roof sheet and existing walls with CM 1:4 both inside & outside) all complete as directed by Engineer In charge.

Providing plain cement concrete of 1:2:4 mix by using 20mm graded crushed granite aggregate for Haunching and top of slab concrete with providing proper slope including mixing, depositing in position, tampering, finishing, curing , material & labour etc., complete all as directed.

Apply two coats of premium quality weather proofing arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (apex ultima), Berger (All guard) where ever specified by Engineer after through scrapping & cleaning of old surface including necessary scaffolding etc., complete. (Rate includes scrapping of old surface by mechanically)

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.

Supply and installation of Workstations with 53 mm thick side walls of approved make Godrej / Featherlite or its equivalent etc., including all accessories as per drawings. (a) Work station of size 4.6X3.6X1.2M includes 4 Nos swing mid back Chairs, 4 Nos Mobile Pedestals, 3 Nos Storage with sliding shutters, 4 Nos ABS Key Board trays and 4 Nos UPS trays - One Set (b) Work station of size 4.6X3.6X1.2M includes 4 Nos Back Chairs, 4 Nos Mobile Pedestals, 3 Nos Storage with sliding shutters, 4 Nos ABS Key Board trays and 4 Nos UPS trays - Three (3) Sets (c) C type cubicals for sittinng of two persons 3.30X1.35X1.2M includes 2 Nos Back Chairs, 2 Nos Mobile Pedestals, 1 No Storage with sliding shutters, 2 Nos ABS Key Board trays and 2 Nos UPS trays - Two (2) Sets (d) L Shape cubicals for sitting of 5 persons 9.30X1.35X1.2M includes 5 Nos Back Chairs, 5 Nos Mobile Pedestals, 3 Nos Storage with sliding shutters, 5 Nos ABS Key Board trays and 4 Nos UPS trays One (1) set

Demolishing of RR/ RCC/ Brick wall in Cement mortar by manually / mechanical means including stacking of serviceable material and disposal of unserviceable materials outside HSL premises as per direction of Engineer-in-charge.

Supply, Fabricate and Fixing of Structural steel work using MS Angles as brackets for Gutters, down take pipes and cladding, trusses, frame work and fabrication work for making required idols (to be informed by HSL/Consultant) and fabrication of grills using MS square bars for windows etc. including two coat of anticorrosive paint over one coat of primer complete all as directed by the Engineer Incharge. (Note:The nature of work is to be carriedout at 5-8M from the Ground level)

Anti- Termite Treatment of existing masonry and wood work by chemical emulsion @ one litre per hole at 300 mm interval and @ 0.5 litre per hole at 150 mm interval respectively including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement: 2 coarse sand) to the full depth of the hole With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration etc., complete

Supply and Fixing of VALLEY GUTTER (600mm to 1000mm girth) made with 2.00mm thick Galvanized sheets of approved make like Jindal / Tata / Bhushan steel or equivalent make approved by Engineer (size, shape and pitch of corrugation as approved by Engineer incharge matched to existing shape) with Zinc coating 120gsm both sides as per IS:277 in 250mpa steel grade, 5 to 7microns epoxy primer on both side of the sheet. This shall be fixed using self drilled screws where ever specified by Engineer representative of size 5.5x55 mm with EPDM seal of CORRO SHIELD or equivalent make. The Joints shall be welded and properly sealed with sealing compounds etc., making required holes for connecting rain water pipes. The scope of work also includes removal of existing damaged Valley Gutter line and useful material hand over to Department and dispose the waste material at specified places complete all as directed by the Engineer Incharge. (Quoted rate shall inclusive of all over laps) (Item includes fixing of rubber sheets to the existing gutter flat bar supports and the available rubber sheets / sleeves of various thickness will be supplied by HSL, but loading, unloading and cutting of required shapes is under contractor scope)

Providing and Fixing 12MM Thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc., for fixing required door fittings, all complete all as specified and directed by EIC.

Supply and fixing of Trapezoidal profiled 2mm thick poly corbonate Roofing sheets (Size,shape and pitch of corrugation as approved by Engineer-in-charge). The sheet shall be fixed using self drilling / self tapping screws @500mm c/c along the length of purlins and wherever specified by engineer of size (5.5mmX55mm) with EPDM seal of make CORRO SHIELD/ BUILTEX/ HILTI etc., (Quoted rate shall inclusive of removal of old damaged sheets).Complete as directed. (Note:The nature of work is to be carriedout at 10.0M to 40.0M from the Ground level)

Providing and applying with prior surface preparation, a set of coatings by different GRIHA & GREEN PRO certified product systems to provide highly elastomeric High Albedo coatings of Panache designed COOL TOP PREMIUM Cool Roofing System, the system having minimum Solar Reflective Index value of not less than 108 (SRI) where Solar reflectance and emittance determined in accordance with ASTM E903 -96 and ASTM E408 -71 (RA 1996), respectively and having aged SRI of minimum 75 after 4 years, maintaining the thickness of not less than 300 microns for the complete system, providing energy efficiency and reducing the cooling load on the buildings. The coating thickness and the methodology specifications should be strictly followed as per the manufacturers specification & as approved by Engineer incharge.

Providing & Fixing of Vox PVC Pannel as false ceiling including All fixtures, Complete all as directed by EIC . (Colour will choosen by EIC)

Providing & fixing kitchen cabinet with all accessories/ fittings. The cabinet to be made out of 19 MM thk water resistant plywood of Century Make or equivalent. The counter, doors and drawers to be finished with 1 mm thk laminate as approved by the Architect/ HSL for both inside & outside. Internal shelves to be flexible and also to be made of 19 MM thk marine plywood and finished with laminate of 1 mm thk. Colour as directed.

Random rubble masnory with hard stone in superstructure above plinth level; and upto five level, including leveling up with cement concrete 1:6:12 (1 cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sils, ceilling level and the like.

Re-routing of existing pipelines (PVC) (110 mm dia) and etc. as directed by EIC

Wall painting (2 coats) with nonosil 20micron or equivalent transperent coating paint of approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. Include all wall treatment + primer. include all surface treatment for achieving smooth surface.

PART-B ( ELECTRICAL WORKS)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (I) 3 1/2 core 240 Sq. mm ( 120 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (B) 3 core 4 Sq. mm

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories CAT III

Point wiring for Individual socket with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. For 6A Socket with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories CAT III

Point wiring for Individual socket with & earthwire of 2.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[III] For 16A Socket with 2-4 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories.CAT-III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (B) 2 wire 2.5 sq. mm

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed for [B] modular type accessories 1 no. 6A / 16A universal Switch cum Socket combined. CATIII 3 nos. 6A Switch 3 nos. 6A 5 pin Socket

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (c) 32 mm

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed.

Providing and erecting Sheet Steel powder coated MCCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCCB/MCBs. (The DBs should be used of same company of MCCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iv)12 way Incoming: 63 Amps, 4P, MCCB Outgoing: 10 Amps, SP/DP, MCBs

Providing and erecting Sheet Steel powder coated MCCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCCB/MCBs. (The DBs should be used of same company of MCCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iv)12 way Incoming: 100 Amps, 4P, MCCB Outgoing: 20 Amps, SP/DP, MCBs

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 400 AMP TPN MCCB as incomer and three phase outgoing as per following . Outgoing: 160 Amps MCCB, 4P - 2 Nos 100 Amps MCCB, 4P - 3 Nos.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 with Suitable Box having following capacity (A) 20 to 32Amp. Cat.III

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-III

75mm x 25mm x 1.6 mm with One Compartment

100mm x 25mm x 1.6 mm with one compartment

225mm x 25mm x 1.6 mm with Three Compartment

250mm x 25mm x 1.6 mm with Three Compartments

300mm x 25mm x 1.6 mm with Three Compartments

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..150 X 50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.300 X 75 X 1.5 mm Thick

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire.

360° Occupancy Slim PIR - Presence Room Ceiling Mount - 230V Energy Saving Motion Sensor with complete wiring

Providing and placing in position Abby Enso P 90 50W NW40K SBL Non Dimmable with LED

Supply, Installation, Testing and Comissioning of 4MP Varifocal Lens Dome Type Camera, H.265 4MP IR Turret Dome N/W Camera, Manual Varifocal 2.8-12mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Built in MIC, Cyber Security, Basic intelligent video analytics, Audio In, NDAA Compliance, UL, CE, FCC Certified (Including Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of Rack Mount Network Video Recorder (NVR Server without HDD and Camera License) NVR Server for 64 Camera, CPU : Intel Core i7 or better, RAM : 16 GB or better ,OS Drive : 128 GB SSD or better, HDD Storage support Upto 80TB with RAID5 configuration. Operating System : Windows/Linux, NIC : 2 x 1 Gbps, USB Port : 6, Video storage rate up to 500 mbps, Dual power supply, Max 2 simultaneous display monitor Regulatory Approvals : UL, cUL, CE, FCC, BIS & NDAA Compliance. (Including Five year free maintenance with guarantee)

Supply, installation, testing and commissioning of Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge.Modem Jack for Computer Open RJ-45 CAT VI.

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6e ( For LAN, Telephone & Camera).

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification Shall be suitable for loading unshielded & shielded jacks for different category systems (CAT 6 & CAT 6A)

SITC of company fabricated patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. (A) 1 Mtr

SITC of company fabricated patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. (A) 2 Mtr (for System side)

Providing & erecting Fiber Optic Cable, 50/125μ, OM3 Outdoor Shall be 50μ, Multi mode OM3 non-metallic armored cable as per ISO/IEC-11801 Shall be able to meet Gigabit & 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae (10G Base-X) Shall be suitable for using in the building shaft and outdoor laying, Shall be Unitube Jacketing Material Shall be HDPE with nominal thickness of 2.1mm and overall diameter (Nominal )10mm . (A) 6 core Multi mode

Splicing charges per Core

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget. Recommended Make: HP or equivelnt approved by Engineer in-charge

SITC of 48 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget. Recommended Make: HP or equivelnt approved by Engineer in-charge

SITC of Switch connected Transceivers (1G)

Providing & erecting Fiber Optic SC/LC style fully loaded Patch Panel (FOPP), 19" Rack Mount with following nos of OM3 50/125μ Pigtails.as per ISO/IEC-11801-OM3 Pigtails with SC/LC Type Connectors Pigtail Attenuation ≤0.3dB measured at 850nm Acc to IEC 61300-3-4 Method B Return Loss ≥ 30dB, in mated condition Pigtail Cable Information – Outer Jacket Diamter – 0.9mm, Outer Jacket Material – LSZH Shall have all accessories including coupler plates pre-loaded with duplex LC couplers (OM3), pigtails for terminating fibers on the FOPP Shall be Front Patching Type, 1U high and rack mountable on standard 19” rack with mounting arrangements.(A) 12F Loaded with Coupler, Pigtail and Splice Trays

Supply and connecting OFC MM Patch Cards (3Mtrs)

Providing & Erecting Netwrok rack with following capacity with Necessary cooling fan,Cable manager,6A PDU,equipment rack with necessary mounting accessories. (A) 18 U

Re-routing of existing services - network/ power cables as directed by Engineer in-charge. This includes securing the cables with cable tray

Splicing charges per Core (of existing OFC cable)

Supply,Installation,Testing and Commissioning of 20 ft HDMI Interface Cable Should be 20ft Male to Male High-speed Category 2 HDMI cable; Should be 24k gold-plated 19-pin Type A connector; Should have High-flex CL3-rated jacket; Should Support 4K60 4:4:4 video; Should support 18 Gbps bandwidth; Should be RoHS compliant (Including Five year free maintenance with guarantee)

Providing & erecting approved make Fingerprint and card based Premium Door Controller with LCD and Keypad having following features. (A) Optical Fingerprint and Card based Reader (Card personality Module not included] (B) Dot-Matrix LCD and Touch sense Keypad (C) Built-In interfaces like door lock, door sense, exit Reader, Exit switch, Ethernet RS485, Aux Input & Aux Output Port (D) 5000 Events, Access Control, Time Attendance, Tamper Detection (E) 4 LEDS and Buzzer

Ceiling Mounted 4-Way type Cassette type Split AC units having sound level lower then 45 Db at High Fan Speed. The unit shall be insulated with sound absorbing thermal insulation material, Poly-styrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel & resin net filter with Mold resistance. Including outdoor unit and Refrigerant Copper Piping upto 10m length. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, drain pump, drain pan, electrical expansion valve, screws, clamps, washer for hanging bracket & insulation for fitting.(in case more than one color shade of the panel is available, the shade shall be shortlisted from architect before supply) With cordless remote control & individual cutoff MCB near each unit.

1.5 TR 4-Way Cassette AC

2.0 TR 4-Way Cassette AC

2.5 TR 4-Way Cassette AC

Installation,testing and commissioning of exhaust fans of following sweeps including making the hole to suit the size of the above fan, making good the damage, connections, testing, commissioning etc. as required.

Exhaust fan upto 450 mm sweep

UPVC Drain Piping with proper leak proof adhesive at joints, all types of fittings, mounting materials, clamps & supporting structure, etc. Pipe should be insulated with 9mm XLPE rubber.

Size:32 NB

JYOTHI ENGINEERING WORKS (BID ID -416454)

VISHWANADH AVENUES INDIA PRIVATE LIMITED (BID ID -416325)

SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -416483)

maple tree projects (BID ID -416477)

RAJESH ENTERPRISES (BID ID -416479)

POONAM ENTERPRISES (BID ID -416367)