Loading
Loading…
Loading…
Tender Value
₹4.2 L
EMD Value
₹10,578
Closing Date
7 Jul 2026, 6:00 pmClosed
ASSISTANT ENGINEER
O/O THE ASST EXE ENGINEER LSGD SUB DIVISION PEERUMEDU
Retender Annual Plan- PROJECT N0 - 409/2025-26- MOONKALAR KURISHUMALA SC NAGAR DWS IN VANDIPERIYAR GP, AZHUTHA BLOCK
2026_LSGD_858023_4
ET4/PMD/2026-27
Open Tender
Civil Works - Buildings
Item Rate
90 days
AZHUTHA BLOCK PANCHAYATH
Please refer Tender documents.
8 documents required · 8 mandatory
₹935
Yes
₹10,578
Yes
29 Jun 2026
29 Jun 2026
8 Jul 2026
29 Jun 2026
7 Jul 2026
29 Jun 2026
29 Jun 2026 - 7 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DRINKING WATER SCHEME | |||||
| 1.001 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.004 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | - | Litre | - | - |
| 1.005 | OD536077/2025-2026:Supplying and fixing 75 mm dia 8 kg/cm2 HDPE pipe, PE-80, including specials and all fitting charges but excluding trenching and refilling etc complete. (E E Approved Rate) | - | metre | - | - |
| 1.006 | OD536116/2025-2026:Supplying and fixing 25 mm dia 8 kg/cm2 HDPE pipe, PE 80 including specials and all fitting charges but excluding trenching and refilling etc complete. | - | metre | - | - |
| 1.007 | 18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore | - | each | - | - |
| 1.008 | OD536117/2025-2026:Making connection of HDPE distribution branch with HDPE main of following sizes by providing and fixing Service saddle, including cutting andfixing the pipe etc. complete:(18.13.2)
50 to 80 mm nominal bore | - | no | - | - |
| 1.009 | 18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore | - | each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
dwsnit.pdf
Tender Documents • 0.03 MB
dwssbd.pdf
Tender Documents • 1.81 MB
BOQ_1450467.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .