Construction of Permanent rest room at Terrace Floor of Dam Control Room of Dhauliganga Power Station

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet

Demolishing R.C.C. work manually/ by mechanical means including stacking cu.m of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Providing and laying cement concrete 1:1:2 (1 cement:1 sand:2 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Columns, beams and Slab.

Centring and shuttering including trutting, propping etc. and removal of form for Columns, Pillars, piers, Abutments, Posts and Struts.

Reinforcement of RCC Work including straighting, cutting bending placing in position and binding all complete. Cold twisted bars.

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor v level in all size.Cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand).

Steel work welded in built up section/framed work including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer using steel etc. asrequired. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.

Providing & fixing fly proff wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 m and nuts & bolts complete. Galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete With 4.0 mm thick glass panes.

Providing and fixing ISI marked M.S. pressed butt hinges bright , 75x47x1.70 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS; (I) 100mm.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, 100x10 mm

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall, 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall, 15 mm dia. nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm waste pipe White Vitreous China Flat back wash basin size 450x300mm with single 15 mm C.P.brass pillar tap.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P., Size 450x300x150 mm.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (i) 15mm

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (i) 15mm

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked black enamelled M.S. butt hinges with necessary screws as per directions of Engineer-incharge and panelling with panels of 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 :

Providing and fixing 28mm thick door shutter made of solid PVC foam profile with homogenious fine cellular structure havingsmooth outer integral skinhaving 71mm width and 28mm thick as vertical and horizontal style. Joints are made using solvent adhesive GI'C section (39mmx19mmx0.6mm thick) or M.S pipe (40mmx20mm) stiffner frame insert and telescopic polymeric 'L' corner. The panel shall be filled with 3mm thick high-pressuer compact laminatedas per manufacturer specifications and direction of engineer incharge, covering moulding shall be provided for covering fixing screwsand elegant look ( for W.C bathroom door shutters).

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic 250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating 250x10 mm.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not 125 mm.

12 mm cement plaster of mix:1:4 (1 cement : 4 coarse sand).

6mm Cement plaster to ceiling In Cement Mortar 1:3(1 Cement: 3 Sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shades with 6 mm thick hard board backing: Rectangular shape 453x357mm

Dismantling steel work in built up sections in angles, tees, flats and kilogram channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameter

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. Sheetbars.

Drilling of 32 mm dia, 0.50 m deep holes in base slab concrete including all cost of labours, materilas, equipments as per direction of engineer in charge.

Fixing 16/25 mm dia L shaped ancores between base concete and HPC by injecting Epoxy grout including all cost of labours, materils, equipments as per direction of engineer in charge.

Amount of Scrap (Subtracted from the work)

Har Singh Dhami

M/S GANESH SINGH DHAMI

MANSARVER ENTERPRISES