Widening and strengthening of Pilibhit Majhola Road ODR in District Pilibhit

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Construction of granular sub-base Grading 1 by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, as per section 400 of MORTH specifications complete in all respects.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MORTH Specification Clause 406 (4.14)

Providing and applying primer coat with SS1 grade emulsion (HINCOL) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORTH Specification Clause 502 (5.1)

Providing and applying tack coat with VG-10 (IOC/HPCL) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom as per MORTH Specifications section 500 / relevant IRC codes complete in all respects.

Providing and laying dense graded bituminous macadam Grading 1 with 80 - 100 TPH capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 4.0 per cent, mini., by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification section 500 complete in all respects.

Providing and applying tack coat with VG-10 (IOC/HPCL) using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, as per MORTH Specifications 500 complete in all respects.

Providing and laying bituminous concrete Grading 2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 5.4 per cent, mini., of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specifications 500 complete in all respects.

Construction of un-reinforced, dowel jointed, plain cement concrete pavement (PQC M-35) over a prepared sub base with approve grade cement PQC M35 with @ 400 kg of cement per cum, mini., coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished In continuous operation including provision of contraction, expansion, construction and longitudinal Joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tle rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per MORTH specifications Section 600 / Clause 602 complete in all respects

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of MORTH Specifications Section 300, table No. 300-2 of MORTH specifications section 300 complete in all respects. (Carted Upto 5.00 Km)

Cement concrete with 4 cm. (1½") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR 279

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materialas per MORTH Specification section 200, 300 complete in all respects.

PCC Grade M15 Using Batching Plant complete in all respects as per MORTH specifications Section 1700, 1000, 2100, 2200, 2300

Sand Filling in Foundation Trenches as per Drawing & Technical Specification section 300 complete in all respects.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications section 1300 complete in all respects.

Supplying and Laying of Compacted 40 mm gauge brick ballast around and below Hume Pipe comlete in all respects as per specifications section 2800, 2900 etc. complete in all respects.

Providing and Laying of 1000 mm dia RCC Hume Pipe NP-3 Class etc. Complete in all respects as per Technical specifications section 2900, 2800 etc.

Providing and Laying of 350 mm dia RCC Hume Pipe NP-3 Class etc. Complete in all respects as per Technical specifications section 2900, 2800 etc.

Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications Section 1300 & 2200 etc.

Reinforced Cement Concrete grade M-25, complete in all respects as per Drawings and MORTH Technical Specifications Section 1700, 1000, 2100, 2200, 2300 etc. using Batching Plant.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement (Sail/Tata/JSPL) in Foundation complete as per Drawing and Technical Specifications section 1600 complete in all respects.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drainage face complete as per drawing and Technical Specifications Section 2700 & 2200 etc.

Providing Cost of dewatering I/c cost of boaring,laying of 4" dia P.V.C.pipe ,hire charges of 7.50 K.V.Deisel pumping set ,hire Charges of P.V.C. pipe & cost of 4" dia plastic pipe for disposal of water as required distance also I/c wages of repairing leakage during operation with hire charges of tractor I/c loading & unloading pumping set complete in all respect to carry out various activities of foundation work etc. conforming to and to the requirements of section 300, 2100, 2400, 2900 as the case may be.

Plastering with cement mortar (1:3) on brick work in sub-structure as per Technical Specifications. As per MORTH Specification section 1300 & 2200 complete in all respects.

M/s Juneja Construction Pvt Ltd

M/s Hanu Infrastructure Pvt Ltd

M/S A B INFRAZONE PRIVATE LIMITED

SHAKUNTALA SINGH

Jagdish Saran

MAHENDRA SINGH

BHARDWAJ UNIBUILD PRIVATE LIMITED

Jalakash