Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC NOT AVAILABLE | L1 | Accepted-AOC Accepted | |
| 2 | L2₹42.2 L+₹1.4 L (3.54%)Rejected-Finance | L2 | Rejected-Finance BecomeL2 | |
| 3 | L3₹42.7 L+₹1.9 L (4.73%)Rejected-Finance C O MALAY DUTTA MADHYAPARA OPP DARRANG COLLEGE GIRLS HOSTEL P O TEZPUR DISTT SONITPUR ASSAM 784 001 | SONITPUR | ASSAM | 784001 | L3 | Rejected-Finance BecomeL3 | |
| 4 | L4₹43.0 L+₹2.2 L (5.48%)Rejected-Finance | L4 | Rejected-Finance BecomeL4 | |
| 5 | L5₹43.4 L+₹2.6 L (6.38%)Rejected-Finance | L5 | Rejected-Finance BecomeL5 |
Tender Value
Refer Docs
EMD Value
₹88,200
Closing Date
26 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur, Mission Charlia
PROVISION OF CERTAIN SANCTIONED MINOR WORK AND REVENUE WORK AT MISA CAMP (PHASE-6) UNDER GE (S) TEZPUR
2023_MES_616320_1
8795
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹88,200
Yes
11 Oct 2023
29 Aug 2023
28 Sept 2023
29 Aug 2023
26 Sept 2023
12 Sept 2023
30 Aug 2023 - 11 Sept 2023
Amount
Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard cement concrete ,complete all as specified and directed
Excavation over area n exc 1.50 mtr in depth and getting out in hard/dense soil complete all as specified and directed
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil.complete all as sfd and as directed.
Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide on plan in soft/loose soil and getting out.complete all as specified and directed
Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.
M&L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in concrete bed to septic tank.complete all as specified and directed
M&L for RCC (1:2:4) type BI (using 20mm graded stone aggt) as in precast slab set in CM (1:4).complete all as specified and directed
M&L for earth filling under floor or in foundations including watering and consolidation complete all as specified and directed.
M&L Hard core of gauge n exc 63 mm of broken boulder bellow plinth protection/hard standing/floor.Complete all as specified and as directed.
Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as directed
M & L Damp proof course 40 mm thk in PCC 1:2:4 type B-0 to horizontal or vertical surface.complete all as specified and directed
M&L for brickwork with sub class 'B' bricks stright or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.
M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in honey comb brick work built in CM 1:4 complete all as specified.
Demolition of RCC of any description specifically provided for including removal of debris out of MoD land complete all as specified & directed.
M&L RCC M-25 Design Mix type B1 using 20 mm graded aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, under reamed piles and mass concrete all as specified and directed.
M & L RCC M-25 Design Mix type B1 using 20 mm graded aggregate as in lintel/chajjas and the like all as specified and directed.
M&LRCC M-25 Design Mix type B1 using 20 mm graded aggregate) as in beams, cantilevers, lintels, over 1.5 m span all as specified and directed.
M&L RCC M-25 Design Mix type B1 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts all as specified and directed.
M&L RCC M-25 Design Mix type B1 using 20 mm graded aggregate as in beams, cantilevers, lintels, over 1.5 m span all as specified and directed.
M&L RCC M-25 Design Mix type B1 using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.
M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.
M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified.
M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.
Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick.Complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia confirming to Gde Fe 500 D, complete all as specified and directed.
S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed.
S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
S&F anodised aluminium snap grid frame work of 605x605mm size for false ceiling all as specified and directed.
M & L 4mm thick non asbestos fibre cement building board fixed/inserted to Aluminium frame work, as in ceiling complete all as specified and as directed.
M & L applying two coat of distemper on ceilling non asbestos fibre cement building board surfaces , complete all as specified.
S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.complete all as specified and directed
S & F Factory made solid panel pvc door shutter with chowkhats 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed
S&F 35 mm thick factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified & directed.
S&F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).complete all as specified and directed
S&F 200 mm long,aluminium,anodised, barrel tower bolts of extruded section all as described complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.
M&L for extruded aluminium alloy handle fabricated type of 150 mm long.complete all as specified and directed
M & L cement concrete tye D-2, 1:4:8 ( 40 mm graded aggregate ) 75 mm thick as in sub base of floors.
S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed.complete all as specified and directed
S&F for MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified
M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar1:6. complete all as specified and directed
S&F for colour Glazed ceramic tiles 450x300mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed or bedding layer in cement mortar1:4.complete all as specified and directed
M&L 18-20 mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed.
M&L machine cut kota stone slab 18-20 mm thick as in skirting,risers of steps laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including rendering 10 mm thick on brick wall or concrete surfaces in cement mortar 1:4 for fixing of tiles complete all as sfd and directed.
M&L for chequrred cement concrete tile 25 cm x 25 cm x25 mm thick set jointed and pointed in neat cement slurry in floors, with grey cement and pigment including 15 mm thick screed bed or bedding layer in cement mortar1:6.complete all as specified and directed
M & L rendering 15mm thick on brick wall or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified
M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:4) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.) complete all as specified and directed
M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth ( WPC for finishing layer will be measured and paid seperately as supply only).complete all as specified and directed
Supply only water proofing compound @ 1% by the weight at of cement complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in path/pavings finished rough and laid in alternate bays to receive chequered tile all as specified and directed.
M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or weldedy complete all as specified and directed by Engineer-in-Charge
S/F steel window frame with side hung shutters including box type hinges with steel handle and steel pegs stay complete with glazing bars complete all as specified and directed
S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete all as specified and directed.
M & L sheet glass ordinary quality 4mm thick and glazing with oil putty in squares n.exc. 0 .5 sqm each pane complete all as specified.
Material and Labour including preparation of new plastered wall surfaces and applying three coat of white Wash complete all as specified and directed.
Material and Labour two coat of cement base paint including preparation of new plastered surfaces complete all as specified and directed.
M & L applying two coat of oil bound distemper over a coat of primer over 2 mm thick wall care putty by smart painting method on newly plastered wall surface including preperation of the surface complete all as specified.
M & L for two coats of exterior emulsion antifungus paint over a coat of wall primer over a coat of 2 mm thick (minimum) wall care putty by smart painting method to wall including preparation of new wall surface as specified and directed
M&L preparation of new steel surfaces and apply two coats of synthetic enamelled paint over a coat of red oxide primer over 10cm width or girth.complete all as specified and directed
M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.
S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.
Dismentling wrought iron or mild steel work of any desdription like purlin, post, etc not otherwise provided for complete all as specified & directed.
S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.
M&L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.
S&F mild steel framed work conforming to Fe-290 (Gde E-165), as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS- 1161-1979 grade St-240 complete all as specified and directed
S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, cladding of sheets etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165,complete all as specified & directed.
S&F Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, length of bolt exc 22.5cm and n exc 30cm longwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.
S&F MS Hold fast confirming to Fe-290 Gde E-165.complete all as specified and directed
M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc.complete all as specified and directed
S & F vitreous china white wash hand basin flat back of size 550 x 400 mm including brackets CP waste coupling 32 mm and PVC waste pipe and 15mm PVC connection.complete all as specified and directed
S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position.complete all as specified and directed
S&F ball brass valve high pressure with polythene float & flynut screwed for iron pipe and fixed of size 20mm bore complete all as directed at site.complete all as specified and directed
S & F for 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Supply and fixing 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as directed.
S & F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S & F for 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S/F vitreous china 580x440 mm,"ORISSA PATTERN" with 'P' or 'S' trap size squatting pan (Exclusive flushing cistern and flush pipe) incl foot rest complete and provision of lime concrete bedding complete all as specified and directed.
S & F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets , long bend including flush pipe of PVC 32mm dia and connection to pipes etc complete all as specified and directed .
S & F Towel Rail 600mm long of chromium plated brass metal fixed with and including Chromium plated brass screws and wooden/plastic cleats.complete all as specified and directed
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.
S &F 15 mm dia brass CP shower rose swivel type fix to iron pipe all as directed.
S & F 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed.complete all as specified and directed
S&F bib tap, chromium plated , fancy type, screwed for iron pipe or brass ferrule , 15 mm bore and fixed complete all as specified and directed.
S&F pillar taps, cast copper alloy , with capstan heads, fancy tupe, chromium plated , screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe , and fixed complete all as specified and directed.
S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.complete all as specified and directed
S&F in repair Glass corner consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.complete all as specified and directed
S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors.complete all as specified and directed
S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors.complete all as specified and directed
Supply & fixing 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 40mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors.complete all as specified and directed
S& F 110 mm dia PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed
S& F 75 mm dia PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed
S& F 110 mm dia PVC (SWR) bends any radius fixed in any position, complete all as specified and directed
S& F 75 mm dia PVC (SWR) bends any radius fixed in any position, complete all as specified and directed
M&L for supply, laying, jointing and testing salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed by the Engineer-in-Charge. (Note:- Excavation/earth work and concrete bed shall be measured and paid for separately)
M&L plain cement Concrete 1:3:6 type C2(Using 40mm graded agg) for concrete bed to drain pipes of 150mm bore, under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engineer-in-Charge
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement.
Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLHS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Rate deemed to be inclusive of cutting chases and making good disturbed surface).
All as per item No.109 above but One 3 pin 5 Amps socket out let points on independent board
All as per item No.109 above but 5 Amp socket on same board with other switches.
M & L for point wiring for socket out let on 16 Amps independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Rate deemed to be inclusive of cutting chases and making good disturbed surface).
Supply and fixed switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.
Supply and fixing switch socket combination 2 in 1, 5 pin 5 and 15 Amps, flush type universal, 240 Volts complete all as specified and directed.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
Supply & fixing lamp holder with 10 watt LED BULB, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.
Supply and fixing Building security light fittings 30 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete with suitable GI pipe of dia 25mm with clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.
Supply and fixing 20 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6500K including necessary connection complete all as specified and directed.
Supply and fixing epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
Supply and fixing epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
Supply and fixing MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.
Supply and fixing MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and directed
S & F ventilating exhaust fan 230/300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
sanjay upadhya
M/S Jiban Krishan Das and Co
M/s MN ENTERPRISRE
SHANKAR ENTERPRISE
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .