Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC | L1 | Accepted-AOC Accepted for acceptance being lowest | |
| 2 | L2₹14.8 L+₹12,214 (0.83%)Rejected-Finance | L2 | Rejected-Finance Not L1. | |
| 3 | L3₹16.4 L+₹1.6 L (11.1%)Rejected-Finance | L3 | Rejected-Finance Not L1. | |
| 4 | L4₹16.4 L+₹1.7 L (11.4%)Rejected-Finance 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L4 | Rejected-Finance Not L1. | |
| 5 | L5₹19.1 L+₹4.4 L (29.7%)Rejected-Finance 37 B SAHEB KRUPA SOC JIVAN CHETAN SCHOOL SAMA ROAD VADODARA GUJARAT PIN 390 008 | VADODARA | GUJARAT | 390008 | L5 | Rejected-Finance Not L1. |
| Sl No | Description | Qty | Unit | M/S Rajendra Constructions L2 | S t modi L1 | M/S Badri Electicals L4 | Pratik Enterprise L5 | PRAFUL ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Material & Labour for removing of unserviceable Charpoy GI Pipe nylon newar to charpoy GI pipe with Plywood top, tightening of all loose components of complete charpoy such as check nuts, elbows, long rails, short rails, legs, etc and supply and fixing 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 920 mm in single piece fixed on top of Charpoy GI pipe with & including supplying and fixing two Nos stiffeners made out of mild steel flat iron 35mmx5mm, 880mm long between long rails parallel to short rails with equal spacing and power welding duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer, plywood top fixed with and including mild steel galvanized iron nuts & bolts of size 70mm long x 6mm dia (Nos of bolts to be provided - 12 Nos) with GI washers of suitable size (Heavy weight) in sufficient numbers on top of bolts to maintain the plywood top in true leveled position and one GI washer on underside of each bolt for proper tightening of bolt, embossing word "MES” with height of letters 10cm on four corners of the plywood top with thick black synthetic enamel paint, complete all as specified, shown on drawings and as directed. Notes :- (i) The above mentioned size of plywood is firm and no tolerance in size, thickness etc shall be accepted. (ii) Plywood shall be provided in single piece in each Charpoy. (iii) Electric arc welding shall be used to fix stiffeners. (iv) Welding rod shall be ISI marked. (v) Purchase voucher of plywood shall be obtained by the contractor from authorised dealer/manufacturer and shall be submitted to Engineer-in-Charge. Drg No;-FD-220 | 600 | Each | 1,600 ₹9,60,000 Lowest | 1,600 ₹9,60,000 Lowest | 1,753 ₹10,51,800 | 1,644 ₹9,86,400 | 1,666 ₹9,99,600 |
| 1.01 | Material & Labour for removing of unserviceable long rail of Charpoy GI pipe and supply and fixing new long rail made out of GI tubing 32 mm bore, medium grade, ISI Marked, 1980mm long, duly continuous welded properly at both ends as per best trade practice and also duly painted with aluminium paint on welded portion, complete all as specified, shown on drawings and as directed. Notes :- (i) Welding of new rail shall be as per best trade practice with continuous welding and as approved by GE. (ii) Unit for measurement of this item is ‘Each’Job which shall comprise of removing of one old long rail and supply and fixing of one new long rail in lieu. (iii) Electric are welding shall be used. (iv) Welding rod shall be ISI marked. Drg NO- FD-220 | 550 | Each | 250 ₹1,37,500 Lowest | 292 ₹1,60,600 | 345 ₹1,89,750 | 390 ₹2,14,500 | 466 ₹2,56,300 |
| 1.02 | Dismantling carefully unserviceable short rail of Charpoy GI pipe and replacement by short rail made out from old long rail GI pipe retrieved under serial item No. 1.01 here-in-before, duly continuous welded properly at both ends as per best trade practice and also duly painted with aluminium paint on welded portion, complete all as specified, shown on drawings and as directed. Notes :- (i) Welding of rail shall be as per best trade practice with continuous welding and as approved by GE. (ii) Unit for measurement of this item is ‘Each’ which shall comprise of removing of one old short rail and fixing of one short rail in lieu made out of old long rail. (iii) The rate quoted for this item shall include for making of short rail by cutting from old long rail in appropriate size. (iv) Electric arc welding shall be used. (v) Welding rod shall be ISI marked. Drg NO. FD-220 | 550 | Each | 50 ₹27,500 | 34 ₹18,700 | 25 ₹13,750 Lowest | 284 ₹1,56,200 | 46 ₹25,300 |
| 1.03 | Dismantling carefully uncerviceable leg of Charpoy GI pipe and replacement by leg made out of from old short rail GI pipe retreived under serial item No.1.02 here-in-beore duly continious welded property at one end as per best trade practice and also duly painted with aluminium paint on welded portion with & including supply & fixing mild steel 5mm thick & 35mm dia plate to the bottom leg duly continous welded as per best trade practice and also duly painted with two coats of aluminim paint complete all as specified shown or drawing and as directed. Notes : - (i) Welding of leg shell be as per best trade practice with contionous welding and as approved by GE (ii) Unit for measurement of this item in each job which shell comprise of removig of one old leg and fixing of one leg in lieu made out of shore rail (iii) The rate quoted for this item shell include for making of leg by cutting from old short rail approprite size (iv) Electric arc welding shell be used (v) welding rod shell be ISI marked. Drg NO.FD-220 | 500 | Each | 50 ₹25,000 | 34 ₹17,000 Lowest | 72 ₹36,000 | 174 ₹87,000 | 56 ₹28,000 |
| 1.04 | Supply & fixing in position GI 3 way elbow 32mm bore, medium grade (‘B’ Class), ISI marked in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI 3 way elbow 32mm bore complete all as specified, shown on drawings and as directed. Drg NO.FD-220 | 800 | Each | 50 ₹40,000 Lowest | 63 ₹50,400 | 72 ₹57,600 | 135 ₹1,08,000 | 76 ₹60,800 |
| 1.05 | Supply & fixing in position GI check nut 6mm thick 32mm bore, medium grade (‘B’ Class), ISI marked in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI check nut complete all as specified, shown on drawings and as directed. Drg No. FD-220 | 2,000 | Each | 15 ₹30,000 | 13 ₹26,000 Lowest | 17 ₹34,000 | 35 ₹70,000 | 16 ₹32,000 |
| 1.06 | Material & labour for electric welding of long rails, short rails, legs of 32mm bore GI tubing by continuous welding around the broken joint duly painted with aluminium paint on welded portion complete all as specified & as directed.
Notes :- (i) Unit for measurement of this item is ‘Each’ which shall comprise of welding of each broken joint all as specified above. (ii) Welding rods shall be ISI marked (iii) This item shall not be paid for serial item No. 1.00 to 1.06 here-in-before. DRg NO.FD-220 | 500 | Each | 25 ₹12,500 | 30 ₹15,000 | 25 ₹12,500 | 50 ₹25,000 | 16 ₹8,000 Lowest |
| 2.00Removing old and unserviceable parts / components of “ Chair Verandah with PVC seat and S&F new parts / components of same size, existing pattern and with appropriate welding and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD/MAP/15/06) | ||||||||
| 2.01 | Removing of U/S PVC seat of chair verandha and S & F with new of seat of chair verandha as per drg. All as specified and as directed by Engr-in-charge. | 260 | Each | 250 ₹65,000 Lowest | 370 ₹96,200 | 292 ₹75,920 | 374 ₹97,240 | 306 ₹79,560 |
| 2.03 | Removing of U/S PVC seat of chair verandha and S & F with new of Back of chair verandha as per drg. All as specified and as directed by Engr-in-charge. | 260 | Each | 250 ₹65,000 Lowest | 365 ₹94,900 | 292 ₹75,920 | 374 ₹97,240 | 306 ₹79,560 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
16 Jul 2026, 6:00 pmClosed
GE (AF) JAMNAGAR NO.2
Air Force-II, Udhyog Nagar, Jamnagar - 361004
REPAIR / MAINT OF GI CHAROPY, PLYBOARD, NEWAR, RECANNING ETC OF VARIOUS FURNITURE AT AF STATION UNDER GE (AF) JAMNAGAR NO.2
2026_MES_773157_1
8633/E8
Open Tender
Miscellaneous Works
Item Rate
GE (AF) JAMNAGAR NO.2
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) JAMNAGAR NO.2
₹40,000
Yes
8 Aug 2026
18 Jun 2026
18 Jul 2026
18 Jun 2026
16 Jul 2026
2 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material & Labour for removing of unserviceable Charpoy GI Pipe nylon newar to charpoy GI pipe with Plywood top, tightening of all loose components of complete charpoy such as check nuts, elbows, long rails, short rails, legs, etc and supply and fixing 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 920 mm in single piece fixed on top of Charpoy GI pipe with & including supplying and fixing two Nos stiffeners made out of mild steel flat iron 35mmx5mm, 880mm long between long rails parallel to short rails with equal spacing and power welding duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer, plywood top fixed with and including mild steel galvanized iron nuts & bolts of size 70mm long x 6mm dia (Nos of bolts to be provided - 12 Nos) with GI washers of suitable size (Heavy weight) in sufficient numbers on top of bolts to maintain the plywood top in true leveled position and one GI washer on underside of each bolt for proper tightening of bolt, embossing word "MES” with height of letters 10cm on four corners of the plywood top with thick black synthetic enamel paint, complete all as specified, shown on drawings and as directed. Notes :- (i) The above mentioned size of plywood is firm and no tolerance in size, thickness etc shall be accepted. (ii) Plywood shall be provided in single piece in each Charpoy. (iii) Electric arc welding shall be used to fix stiffeners. (iv) Welding rod shall be ISI marked. (v) Purchase voucher of plywood shall be obtained by the contractor from authorised dealer/manufacturer and shall be submitted to Engineer-in-Charge. Drg No;-FD-220 | 600 | Each | - | - |
| 1.01 | Material & Labour for removing of unserviceable long rail of Charpoy GI pipe and supply and fixing new long rail made out of GI tubing 32 mm bore, medium grade, ISI Marked, 1980mm long, duly continuous welded properly at both ends as per best trade practice and also duly painted with aluminium paint on welded portion, complete all as specified, shown on drawings and as directed. Notes :- (i) Welding of new rail shall be as per best trade practice with continuous welding and as approved by GE. (ii) Unit for measurement of this item is ‘Each’Job which shall comprise of removing of one old long rail and supply and fixing of one new long rail in lieu. (iii) Electric are welding shall be used. (iv) Welding rod shall be ISI marked. Drg NO- FD-220 | 550 | Each | - | - |
| 1.02 | Dismantling carefully unserviceable short rail of Charpoy GI pipe and replacement by short rail made out from old long rail GI pipe retrieved under serial item No. 1.01 here-in-before, duly continuous welded properly at both ends as per best trade practice and also duly painted with aluminium paint on welded portion, complete all as specified, shown on drawings and as directed. Notes :- (i) Welding of rail shall be as per best trade practice with continuous welding and as approved by GE. (ii) Unit for measurement of this item is ‘Each’ which shall comprise of removing of one old short rail and fixing of one short rail in lieu made out of old long rail. (iii) The rate quoted for this item shall include for making of short rail by cutting from old long rail in appropriate size. (iv) Electric arc welding shall be used. (v) Welding rod shall be ISI marked. Drg NO. FD-220 | 550 | Each | - | - |
| 1.03 | Dismantling carefully uncerviceable leg of Charpoy GI pipe and replacement by leg made out of from old short rail GI pipe retreived under serial item No.1.02 here-in-beore duly continious welded property at one end as per best trade practice and also duly painted with aluminium paint on welded portion with & including supply & fixing mild steel 5mm thick & 35mm dia plate to the bottom leg duly continous welded as per best trade practice and also duly painted with two coats of aluminim paint complete all as specified shown or drawing and as directed. Notes : - (i) Welding of leg shell be as per best trade practice with contionous welding and as approved by GE (ii) Unit for measurement of this item in each job which shell comprise of removig of one old leg and fixing of one leg in lieu made out of shore rail (iii) The rate quoted for this item shell include for making of leg by cutting from old short rail approprite size (iv) Electric arc welding shell be used (v) welding rod shell be ISI marked. Drg NO.FD-220 | 500 | Each | - | - |
| 1.04 | Supply & fixing in position GI 3 way elbow 32mm bore, medium grade (‘B’ Class), ISI marked in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI 3 way elbow 32mm bore complete all as specified, shown on drawings and as directed. Drg NO.FD-220 | 800 | Each | - | - |
| 1.05 | Supply & fixing in position GI check nut 6mm thick 32mm bore, medium grade (‘B’ Class), ISI marked in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI check nut complete all as specified, shown on drawings and as directed. Drg No. FD-220 | 2,000 | Each | - | - |
| 1.06 | Material & labour for electric welding of long rails, short rails, legs of 32mm bore GI tubing by continuous welding around the broken joint duly painted with aluminium paint on welded portion complete all as specified & as directed.
Notes :- (i) Unit for measurement of this item is ‘Each’ which shall comprise of welding of each broken joint all as specified above. (ii) Welding rods shall be ISI marked (iii) This item shall not be paid for serial item No. 1.00 to 1.06 here-in-before. DRg NO.FD-220 | 500 | Each | - | - |
| 2Removing old and unserviceable parts / components of “ Chair Verandah with PVC seat and S&F new parts / components of same size, existing pattern and with appropriate welding and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD/MAP/15/06) | |||||
| 2.01 | Removing of U/S PVC seat of chair verandha and S & F with new of seat of chair verandha as per drg. All as specified and as directed by Engr-in-charge. | 260 | Each | - | - |
| 2.03 | Removing of U/S PVC seat of chair verandha and S & F with new of Back of chair verandha as per drg. All as specified and as directed by Engr-in-charge. | 260 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BOQ_865745.xls
BOQ • 0.32 MB
07PTenderDocs.pdf
Tender Documents • 0.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .