REPAIR MAINTENANCE OF SUMMER COOLING APPLIANCES WATER HEATER CONNECTED ITEMS REPAIR MAINTENANCE REPLACEMENT OF STREET LIGHT ALLIED WORKS AND REPAIR REPLACEMENT OF LED STREET LIGHT ALLIED WORKS OF CERTAIN UNIT AT MISA CAMP UNDER GE S TEZPUR

Amount

Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for cable trenches/ foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

S&F in replacement steel water tubing 40 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers complete all as specified and as directed.

Supply,laying in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 25 sqmm 4 core and testing including taking out old one complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core and testing including taking out old one complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 4 core and testing including taking out old one complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 2 core and testing including taking out old one complete all as specified and directed.

Supply and fixing LED Street lights not less than 25 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions including taking down old unserviceable light complete all as specified and as directed.

Supply and fixing LED Street lights not less than 60 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions including taking down old unserviceable light complete all as specified and as directed.

Supply and fixing LED Street lights not less than 90 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions including taking down old unserviceable light complete all as specified and as directed.

Supply and fixing of LED flood light fitting light not less than 70 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed including taking down old unserviceable light complete all as specified and as directed.

Supply and fixing of LED flood light fitting light not less than 120 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed including taking down old unserviceable light complete all as specified and as directed.

Supply and fixingof New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED light 35 Watt made up of high grade unbreakable polycorbonate material including taking down old unserviceable light complete all as specified and as directed.

Supply and fixing LED not less than 8W, 5700 K, 0.6 M long LED bollard for pathways and gardens are made with aluminium extrusion for sturdiness and better finish, UV stabilized injuction moulded oval polycarbonate diffuser for spot-free lighting and IP 65 degree of protection with fixing accessories complete as per manufacturer's instructions including taking down old unserviceable light complete all as specified and as directed.

S&F Crown shaped gate/garden light in soothing opal finish made up of unbreakable Polycarbonate material, including 15 W LED Lamp (B-22 base) including taking down old unserviceable light complete all as specified and as directed.

Material and labour for painting to steel tubular pole 9.0/8.5 metre long with two coats of synthetic enamel paint up to 1.20 metre height from ground level in 15 cm alternative black and yellow strips and remaining portion with aluminum paint and MS frames like channel, clamps, angle, D-clamps etc with two coats of aluminum paint complete all as specified and as directed.

Dismantling existing steel or cement poles/ struts, any size carefully including necessary excavation demolition of concrete etc. and removing the old unserviceable rubbish etc complete all as specified and as directed.

M & L for Steel tubular swaged poles complete with cast iron/MS base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31 , 9.0 meter long including making hole of 2 inch dia at 2.5 meter from bottom and 1 inch at 8 meter from bottom complete all as specified & directed. (Note: PCC anti climbing device, cross arms insulator and earth work measure and paid separately)

M&L PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for stay set /Pole/ Panels etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and as directed.

M & L PCC (1:2:4) type B-1 (with using 20 mm graded stone aggregate) as coping of pole/panel including necessary form work as required complete all as specified and as directed.

S&F in repair 1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 2.5 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

S&F in repair1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 4.0 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

Supply and fixing in repair of loop in loop out junction box, IP 65 / IP 66 protection halogen free and weather proof of minimum size (130 x 180 x 77) mm, fixed to Pole with suitable clamp including nuts and bolts and washers including provision of connector fixed to pole complete all as specified and as directed.

Supply and fixing in repair PVC medium grade conduit 20 mm dia for drawing cable between pole junction box and light fitting bracket including fixing clamp made of GI strips and nut and bolts (Minimum 3 clamp in each pole to be provided) complete all as specified and directed.

Supply and fixing in repair 1100 volts grade PVC insulated weather proof sheathed copper cable 1.5 sqmm size 3 core between pole junction box and light fitting complete all as specified and directed.

Supply & fixing in repair bracket of size 32 mm GI pipe for mounting street light at top of existing LT pole including Clamp, cutting, welding, reaming, finishing ,bending in appropriate size at existing location complete all as specified and as directed.

M&L for Boring/Drilling (Horizontally) manually/mechanically under existing road (Maximum 10 M in width) suitable for passing GI tubing of 40 to 150 mm bore complete all as specified and directed.

S&F in replacement of heating element of 2000 W (Round or Triangular Head as required at site) including rubber washer (ISI marked) suitable for existing geysers 25 litrs capacity etc complete all as specified and as directed.

S&F in replacement of 450 mm long PVC connection suitable for hot & cold water supply with chromium plated brass screwed nuts at both ends with washers for making water connection of inlet & outlet from geyser to GI pipe 15 mm dia complete all as specified and as directed.

S&F in replacement of thermostat suitable for water heater of any size/type complete all as specified and as directed.

S&F in replacement PVC insulated & PVC Sheathed three core cable of size 2.5 sqmm with copper conductor 1100 Volts grade complete all as specified and as directed.

S&F in replacement of plug top 3 pin 16 amps ISI marked complete all as specified and as directed.

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ breaking capacity 10KA, C series complete all as specified and as directed.

M&L for wall fastener of size 100 mm long, 8 mm dia with double washers grouting making good in walls cement mortar (1:4) for fixing water heater, spilit AC outdoor after removing the existing unserviceable nuts /bolts and washers complete all as specified and directed.

S&F in replacement of sealed unit compressor suitable for Refrigarator/Deep Freezer of capacity upto 320 ltrs including sealing of the compressor with welding after assembling complete all as specified and as directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

S&F in replacement of sealed unit compressor suitable for water cooler of capacity 40/80 Ltrs including sealing of the compressor with welding after assembling complete all as directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

S&F in replacement of relay suitable for Refrigarator/ Deep Freezer/water Cooler of any capacity complete all as specified and directed.

S&F in replacement of evaporator coil unit complete suitable for Refrigarator/Deep Freezer of any capacity complete all as specified and directed.

S&F in replacement of tap chromium plated 15 mm dia suitable for water cooler complete all as specified and directed.

S&F in replacement of filter stainer of suitable for Refrigarator/Deep Freezer/water cooler/AC of any capacity complete all as specified and directed.

S&F in replacement of overload protector for Refrigerator/Deep Freezer/water coolers/AC complete all as specified and directed.

S&F in replacement of capacitor 6 MFD for AC/water cooler/Deep Freezer/Refrigerator complete all as specified and directed.

Supply and fix in replacement of ice chamber cabinet of Refrigerator of capacity upto 320 ltrs complete all as specified and directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

M&L for leak testing with nitrogen dioxide and refilling with refrigerant R-134a as required for Refrigarator/Water Cooler/Deep Freezer and testing the cooling effect satisfactorily on full load. The filling of gas & testing shall be carried out in the presence of Engineer in Charge complete all as directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

S&F in replacement of thermatically sealed compressor including sealing of the compressor with welding after assembling for 1.5/2.0 Ton Capacity Spilit type AC/ Window type AC complete all as specified and directed.

S&F in replacement of running capacitor 36-45 MFD for window type/Split type AC 1.5/2.0 Ton capacity complete all as specified and directed.

S&F in replacement of starting capacitor 80-120 MFD for window type/split type air conditioner 1.5/2.0 Ton capacity complete all as specified and directed.

S&F in replacement of box type relay suitable for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed.

S&F in replacement of copper condencer coil unit complete for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed.

S&F in replacement of capilary tube suitable for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed..

S&F in replacement of fan blade with blower motor of window/split type AC 1.5/2.0 Ton, Refrigerator, deep freezer, water cooler capacity complete all as specified and directed.

S&F in replacement of control circuit (PCB) with remote device suitable for 1.5/2.0 Ton Split type AC complete all as specified and directed.

S&F in replacement of copper tube of size 1/2'' dia for connection of indoor and outdoor unit of split AC/window AC complete all as specified and directed.

S&F in replacement of copper tube of size 1/4'' dia for connection of indoor and outdoor unit of split AC complete all as specified and directed.

S&F in replacement of insulation cover of size 5/8" for insulating copper tube of split type AC complete all as specified and directed.

S&F in replacement of of flair nut for tighting the inlet valve of gas of desire size for connection of indoor and outdoor of split AC complete all as specified and directed.

S&F in replacement PVC insulated & PVC Sheathed three core cable of size 4.0 sqmm with copper conductor 1100 Volts grade conforming to IS:694/1990 ISI all as specified and directed.

M&L for leak testing with nitrogen dioxide and refilling with refrigerant as required for Split AC/Window AC and testing the cooling effect satisfactorily on full load and the filling of gas & testing shall be carried out in the presence of Engineer in Charge complete all as specified and directed.

M&L for Shifting Split type AC 1.5/2.0 TR capacity including disconnection of out door & indoor unit, Re installed the same to new location after necessary servicing including testing and commisioning complete all as specified and directed.

S&F in replacement of AC support bracket of size 500x500 mm ('L' Shape) 2mm thickness suitable for carrying maximum load 200-250 Kg including necessary fixing arrangements for installation of outdoor unit of split type AC complete all as specified and directed.

S&F in replacement of Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.

S&F in replacement of float valve assembly complete for water cooler 40/150 ltrs capacity water storage type complete all as specified and directed.

S&F in replacemet of water purifier stainer for pre filter of single candle complete all as specified and directed.

S&F in replacemet of water purifier candle filter for existing RO filters complete all as specified and directed.

M&L for servicing refrigerator/deep freezer of any capacity after removing electric wire connection & cleaning of Cooling coil, Filter, etc. including testing to cooling complete to entire satisfaction of Engr-in-Charge.

M&L for servicing of water purifier refrigerator/depp freezer of any capacity after removing electric wire connection & cleaning of Cooling coil, Filter, etc. including testing to cooling complete all as directed by Engr-in-Charge.

M&L for servicing water cooler of any capacity after removing electric wire connection & cleaning of Cooling coil, Filter, etc. including testing to cooling complete all as directed by Engr-in-Charge.

M&L for servicing air conditioner of any capacity and any tupe (window and split) after removing electric wire connection & cleaning of Cooling coil, Filter, etc. including testing to cooling complete all as directed by Engr-in-Charge.

S&F in replacement of control circuit (PCB) with remote device for ourdoor/indoor unit suitable for 1.5/2.0 Ton Split type AC inverter type of existing make and model complete all as specified and directed.

Taking down and Refixing at site ceiling fans 1200/1400 mm sweep including opening of fans and cutting down burnt winding, and rewinding with new super enameled copper winding of same gauge as per existing winding, varnishing, drying, replacement of ball bearing, replacement of condenser etc and re-assembling the same including necessary transportation etc complete including taking down complete all as specified and directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

D G Corporation (BID ID -3337536)

Flint India (BID ID -3337724)