Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC AMBADI NEAR PAACHAKKIL BUS STOP MALAPARAMBA POST KOZHIKODE DISTT KERALA 673 009 | KOZHIKODE | KOZHIKODE | KERALA | 673009 | L1 | Accepted-AOC Awarded contract being lowest | |
| 2 | L2₹39.9 L+₹1.6 L (4.14%)Rejected-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L2 | Rejected-AOC Not being lowest | |
| 3 | L3₹42.0 L+₹3.7 L (9.62%)Rejected-AOC RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L3 | Rejected-AOC Not being lowest |
| Sl No | Description | Qty | Unit | KDR CONSTRUCTION L2 | SANDR L3 | EXCEL ENGINEERING L1 |
|---|---|---|---|---|---|---|
| 1.00Notes: (i) The scope of subject work involves repair and rectification all day to day complaints received from users and other miscellaneous repairs ordered by the Engineer-in-charge time to time during currency of work till date of completion. Hence the site will be handed over to the contractor as per complaints received from the users and as per the requirement. Contractor shall have no claim whatsoever in this aspect. (ii) The contractor or his representative shall collect daily list of complaints from MES complaint cell or from concern JE and shall attend all the complaints in the same day irrespective of number of complaints received. Contractor shall employ sufficient tradesmen accordingly as per requirement. However minimum one plumber and carpenter shall be made available throughout working hours to attend emergency complaints. The rates quoted by the contractor shall be deemed inclusive of cost against supervisor, all tradesmen / labours employed, conveyance required for collecting complaints and attending at site for all items of BOQ. (iii) Contractor shall employ skilled / experienced tradesmen and workers for execution of work. (iv) Contractor or his representative shall submit compliance report of complaints on the same day with receipt / job card duly signed by the users to concern JE. Contractor may use separate register for each category of complaints and obtain signature from users after repair / rectification of complaints received and submit the same during preparation of RARs to concern JE. (v) All critical complaints related to water supply and complaints which posses safety hazards to occupants have to be rectified within 24 hours after receipt of complaints. In case of complaints are not rectified on same day, the contractor shall submit in writing to Engineer-in-charge with valid reasons / justifications for delay and however the same shall be rectified with in 2 working days. Otherwise a recovery of Rs 500 per complaint shall recovered from the contractor. (vi) All unserviceable materials, debries, waste material scrap etc. obtained during repair work other than such of credit materials issued to the contractor shall be removed immediately from site and disposed off at dumping locations earmarked with in the INA premises at no additional cost to the Govt. The cost of labour, transportation etc. shall be deemed included in the rates quoted by the contractor against respective BOQ items and nothing extra shall be paid. (vii) While attending water supply pipeline repairs, tank replacement / cleaning works, or other external works, Contractor may require ladders, site clearance / cutting of vegetation, bushes etc. to make approach to enable work at his own arrangement without any additional cost to the Govt. | ||||||
| 2.00 | Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position all as specified and as directed. | 240 | Each Leaf | 150 ₹36,000 | 200 ₹48,000 | 125 ₹30,000 Lowest |
| 3.00 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets all as specified and as directed. | 30 | Sqm | 35 ₹1,050 | 40 ₹1,200 | 30 ₹900 Lowest |
| 4.00 | Material & labour 4mm thick non-asbestos fiber cement building boards with decorative finish on one face fixed or laid/inserted to timber, GI/aluminium framework with screws all as specified and as directed. | 30 | Sqm | 888 ₹26,640 | 390 ₹11,700 Lowest | 400 ₹12,000 |
| 5.00 | Supply & fix in repairs anodised aluminium snap grid frame work for false ceiling. The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM and fixed with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specified and as directed. | 30 | Sqm | 777 ₹23,310 | 655 ₹19,650 | 450 ₹13,500 Lowest |
| 6.00 | Taking down chowkats or frames any description and size but without taking off shutters from the frames n exc 1.5 sqm all as specified and as directed. | 8 | Each | 255 ₹2,040 | 250 ₹2,000 | 200 ₹1,600 Lowest |
| 7.00 | Taking down shutters of any description and any material n exc 1.5 sqm all as specified and as directed. | 15 | Each | 83 ₹1,245 | 100 ₹1,500 | 75 ₹1,125 Lowest |
| 8.00 | Supply & fix Powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc complete all as specified and as directed.
Note:- Minimum thickness of powder coating not less than 50 Micron | 180 | Kg | 670 ₹1,20,600 | 645 ₹1,16,100 Lowest | 700 ₹1,26,000 |
| 9.00 | Supply & fix in repairs Aluminium Composite Panel 4mm thick of approved colour and shade fixed to wooden / aluminium frame work as in door/cupboard shutters all as specified and as directed. | 36 | Sqm | 2,750 ₹99,000 | 2,200 ₹79,200 Lowest | 3,000 ₹1,08,000 |
| 10.00 | Supply and fix in to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer-in-charge. | 10 | Sqm | 4,950 ₹49,500 | 4,000 ₹40,000 | 3,750 ₹37,500 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 May 2026, 6:45 pmClosed
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2026_MES_763583_1
GE MAINT EZHIMALA 8827
Open Tender
Civil Works
Item Rate
270 days
Ezhimala
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹90,000
17 Jun 2026
5 May 2026
2 Jun 2026
5 May 2026
27 May 2026
20 May 2026
5 May 2026 - 12 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position all as specified and as directed. | 240 | Each Leaf | - | - |
| 3 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets all as specified and as directed. | 30 | Sqm | - | - |
| 4 | Material & labour 4mm thick non-asbestos fiber cement building boards with decorative finish on one face fixed or laid/inserted to timber, GI/aluminium framework with screws all as specified and as directed. | 30 | Sqm | - | - |
| 5 | Supply & fix in repairs anodised aluminium snap grid frame work for false ceiling. The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM and fixed with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specified and as directed. | 30 | Sqm | - | - |
| 6 | Taking down chowkats or frames any description and size but without taking off shutters from the frames n exc 1.5 sqm all as specified and as directed. | 8 | Each | - | - |
| 7 | Taking down shutters of any description and any material n exc 1.5 sqm all as specified and as directed. | 15 | Each | - | - |
| 8 | Supply & fix Powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc complete all as specified and as directed.
Note:- Minimum thickness of powder coating not less than 50 Micron | 180 | Kg | - | - |
| 9 | Supply & fix in repairs Aluminium Composite Panel 4mm thick of approved colour and shade fixed to wooden / aluminium frame work as in door/cupboard shutters all as specified and as directed. | 36 | Sqm | - | - |
| 10 | Supply and fix in to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer-in-charge. | 10 | Sqm | - | - |
| 11 | Supply and fix Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. | 25 | RM | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.80 MB
TenderDocument8827.pdf
Tender Documents • 0.97 MB
BOQ_855307.xls
BOQ • 1.00 MB
Corrigendum1.pdf
PDF • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .